Observation of metal on Si(0 0 1) by STM/STS and its consideration based on the first principles calculations

Local density of states (LDOS) is obtained by the first principles calculation based on the density functional theory on the Si(0 0 1)2 × 1 surface and on the surface with an Al dimer. At an Al dimer, LDOS has a high intensity in the conduction band region, which cannot be seen on the Si(0 0 1)2 × 1 surface. This tendency is observed in STS measurements as well. The possibility for a microelementary analysis is presented by applying this method to other metal atoms on the Si surface. Furthermore, it is pointed out that STS measurements should be always performed at the same tip-sample separation to obtain reproducible STS spectrums.     

Analysis of proton exchange membrane fuel cell catalyst layers for reduction of platinum loading at Nissan

The biggest issue that must be addressed in promoting widespread use of fuel cell vehicles (FCVs) is to reduce the cost of the fuel cell system. Especially, it is of vital importance to reduce platinum (Pt) loading of catalyst layers (CLs) in the membrane electrode assembly (MEA) of a proton exchange membrane fuel cell (PEMFC). In order to lower the Pt loading of the MEA, mass transport of reactants related to the performance in high current density should be enhanced significantly as well as kinetics of the catalyst, which can result in the better Pt utilization and effectiveness. In this study, we summarized our analytical approach and methods for reduction of Pt loading in CLs. Microstructure, mass transport properties of the reactants, and their relation in CLs were elucidated by applying experimental analyses and computational methods. A simple CL model for I–V performance prediction was then established, where experimentally elucidated parameters of the microstructure and the properties in CLs were taken into account. Finally, we revealed the impact of lowering the Pt loading on the transport properties, polarization, and the I–V performance.     

Tribological Properties and Film Formation Behavior of Thermoreversible Gel Lubricants

The tribological properties of a new and unique thermoreversible gel lubricant (TR gel lube) were investigated. TR gel lube, which includes 10–40% of amide-type gelling agent in base fluid, is able to repeatedly alter or convert phase from gel state to liquid state at the melting point of the gelling agent. High-pressure rheological tests were performed in order to characterize the behavior of base oil and TR gel lube as a function of pressure and temperature. The effect of TR gel lube on ball bearing fatigue life was carried out by systematic tests using thrust ball bearings. The results of L ₁₀ life tests of TR gel lube showed a longer life than the conventional greases. This result was investigated from the oil film formation. It was found that the gelling agent played a key role in the lubricating properties. Some mechanisms such as adsorbed film formation and solid-like formation are proposed.     

Giant electric double-layer capacitance of heavily boron-doped diamond electrode

The physical and electrochemical properties of boron-doped polycrystalline diamond electrodes, prepared with various B/C ratio, i.e., 0.1%, 0.5% (BDD-A), 1% (BDD-B), and 5% (BDD-C), were investigated. Electrochemical measurements of the heavily boron-doped films (BDD-C) showed giant electric double-layer capacitance and activity which is significantly larger than BDD-A and BDD-B as well as glassy carbon electrodes. However, interestingly, actual boron concentration of BDD-C was observed to be almost the same as that of BDD-B by secondary ion mass spectroscopy (SIMS) and glow discharge optical emission spectroscopy (GDOES) analysis. It is suggested that the large capacitance is due to a few sp²-bonded carbon impurities, which was observed only in BDD-C, although the amount of the sp²-bonded nondiamond species are very small. In the present work, the reason for the interesting electrochemical properties of heavily boron-doped diamond electrodes is discussed. Furthermore, dimensional stability of the electrodes was also confirmed by conducting harsh anodic treatment.     

Microphase-separated structure and mechanical properties of novel polyurethane elastomers prepared with ether based diisocyanate

A diisocyanate baring ether bonds, 1,2-bis(isocyanate)ethoxyethane (TEGDI), was used for the preparation of polyurethane elastomers (PUEs). The PUEs were synthesized with either TEGDI or HDI, poly(oxytetramethylene) glycol (PTMG), and curing agents by a prepolymer method. 1,6-Hexamethylene diisocyanate (HDI) was also used as a control diisocyanate. The TEGDI-based PUEs exhibited highly softened property on account of flexibility of TEGDI itself and weaker phase separation. Another TEGDI-based PUEs were prepared with either poly(oxypropylene) glycol (PPG) or poly(caprolactone) glycol (PCL). Microphase-separated structure of these TEGDI-based PUEs are quite different from those with general diisocyanates and the PUEs were made be greatly softened.     

日本彩色聚乙烯涂覆钢管的开发

试验了彩色聚乙烯涂覆钢管的耐腐蚀性和耐气候性，由于聚乙烯涂层隔绝水的作用，聚乙烯涂覆钢管具有优良的耐腐蚀性能，电阻绝缘值和优良的机械性能。建立了一个新的方式去研究分析聚乙烯抗老化剂消耗和在聚乙烯中的扩散。用有效测定的方法定量地预测彩色聚乙烯涂覆层的寿命，应用这些分析结果，不仅可使新的有色聚乙烯涂覆钢管在恶劣腐蚀环境介质情况下具有高的耐腐蚀性，而且有长的耐气候性。     

Study of Dielectric Properties of (Sr1-xPbx)TiO3: MgO Composites for Field Tunable Devices

(Sr_1-xPb_x)TiO₃ (SPT) ceramics have low loss tangents and high dielectric tunabilities under DC bias fields at room temperature, but they have the disadvantage of high dielectric constants. In order to exploit these materials for microwave applications, the reduction of dielectric permittivities is necessary. Thus, the composites of the SPT system by the addition of a non-ferroelectric oxide such as MgO were prepared and electrical properties were measured. Loss tangents of the composite sintered at the same temperature as SPT's sintering were less than 0.3% in paraelectric region just above the transition temperature and the dielectric tunabilities of ~20% at 20 kV/cm and ~35% at 40 kV/cm were observed at 10 kHz.     

Photolithographic patterning of organic photodetectors with a non-fluorinated photoresist system

We report on the fabrication of organic photodetectors (OPD) based on isolated islands of P3HT:PCBM. Pattern transfer to the active material was done with photolithography based on non-fluorinated solvents and the excessive organic semiconductor was removed with oxygen plasma reactive ion etching. The photoresist system used was found to be benign to the P3HT:PCBM layer as confirmed by absorption, thickness and roughness measurements. Current–voltage characteristics and external quantum efficiency (EQE) remained unchanged after the patterning process. It was demonstrated that it is possible to photolithographically pattern isolated islands with 200 μm edge length with the same dark current density (<10⁻⁵ A/cm² at −2 V bias voltage) and photocurrent density (>5 × 10⁻³ A/cm² at −2 V). Furthermore, concerning the solar cell performance, the patterned, small-area devices showed power conversion efficiency of 2.1% and fill-factor of 60%. Dark current was observed to depend on the size of the remaining semiconductor island, which was demonstrated on OPDs with diameter of 50 μm. The presented results show the feasibility of fabrication of isolated devices based on organic semiconductors patterned with non-fluorinated photolithography.     

Development of 72‐kV high‐pressure air‐insulated GIS with vacuum circuit breaker

SF₆ gas has excellent dielectric strength and interruption performance. For these reasons, it has been widely used for gas‐insulated switchgear (GIS). However, use of SF₆ gas has become regulated under agreements set at the 1997 COP3. Thus, investigation and development for GIS with a lower amount of SF₆ gas are being carried out worldwide. Presently, SF₆‐free GIS has been commercialized for the 24‐kV class. Air or N₂ gas is used as the insulation gas for this GIS. On the other hand, SF₆‐free GIS has not been commercialized for the 72‐kV‐class GIS. The dielectric strengths of air and N₂ gas are approximately one‐third that of SF₆ gas. To enhance the insulation performance of air and N₂ we have investigated a hybrid gas insulation system which has the combined features of providing an insulation coating and suitable insulation gas. We have developed the world's first 72‐kV SF₆‐free GIS. This paper deals with key technologies for SF₆‐free GIS, such as the hybrid insulation structure, a bellows for the high‐pressure vacuum circuit breaker, a newly designed disconnector and spacer, and prevention of particle levitation. Test results of the 72‐kV high‐pressure air‐insulated GIS with the vacuum circuit breaker are described. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 13–23, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20451