Spreading behavior of polymerizable monolayers of acrylamides with double alkyl chains and polymerization of the LB films

The spreading behavior of N,N'-dialkylacrylamide (dAAs) monomers on a water surface is investigated by measurement of surface pressure-area isotherms as a function of alkyl chain length and temperature. The monolayers of dAAs can be classified into three types. (I) N,N'-dioctadecylacrylamide (dODA) shows a rapid increase in surface pressure indicating formation of a rigid condensed monolayer; (II) the isotherm of N,N'-dihexadecylacrylamide (dHDA) has a plateau region in surface pressure corresponding to a phase transition from a expanded form to a condensed form, which corresponds to gel-liquid crystal phase transition often observed in biomembranes; and (III) the dialkylacrylamides with alkyl chain length shorter than the hexadecyl group form expanded monolayers with no condensed monolayer at any temperature. The similar three kinds of monolayers are also observed in the isotherms for dHDA monolayer as a function of temperature. It is found that two carbon elongation in double alkyl chains causes the same effect on the monolayer induced by about 10 °C cooling. Under various conditions, only liquid condensed monolayers are transferred on to a solid support, yielding the monomer LB films, practically, of dODA at any temperature and dHDA at low temperature. The polymerization of those LB films by UV irradiation was ascertained by the electronic absorption spectra.     

Crystallization of nylon 6–clay hybrid by annealing under elevated pressure

Nylon 6–clay hybrid (NCH) is a molecular composite of nylon 6 and uniformly dispersed silicate layers of montmorillonite. We found that the phase with the high melting temperature (HMT phase) in the NCH annealed under elevated pressure. The melting temperature of the HMT phase was 240°C. Nylon 6 annealed under elevated pressure did not have the HMT phase. Thus, the presence of the HMT phase was characteristic of the NCH. The relative heat of fusion of the HMT phase (heat of fusion of HMT phase/heat of fusion in the pressure annealed NCH) increased with increase in pressure. High-pressure differential thermal analysis (DTA) measurement revealed that the temperature, at which the relative heat of fusion showed a maximum value, was below about 20°C of the melting temperature of the original NCH under elevated presssure. It was considered that the nylon 6 crystallite near the melting temperature and the molecular mobility under elevated pressure were necessary to the appearance to the HMT phase. © 1994 John Wiley & Sons, Inc.     

Plasmon analyses of Triticum (wheat) and Aegilops: PCR-single-strand conformational polymorphism (PCR-SSCP) analyses of organellar DNAs

To investigate phylogenetic relationships among plasmons in Triticum and Aegilops, PCR-single-strand conformational polymorphism (PCR-SSCP) analyses were made of 14.0-kb chloroplast (ct) and 13. 7-kb mitochondrial (mt)DNA regions that were isolated from 46 alloplasmic wheat lines and one euplasmic line. These plasmons represent 31 species of the two genera. The ct and mtDNA regions included 10 and 9 structural genes, respectively. A total of 177 bands were detected, of which 40.6% were variable. The proportion of variable bands in ctDNA (51.1%) was higher than that of mtDNA (28. 9%). The phylogenetic trees of plasmons, derived by two different models, indicate a common picture of plasmon divergence in the two genera and suggest three major groups of plasmons (Einkorn, Triticum, and Aegilops). Because of uniparental plasmon transmission, the maternal parents of all but one polyploid species were identified. Only one Aegilops species, Ae. speltoides, was included in the Triticum group, suggesting that this species is the plasmon and B and G genome donor of all polyploid wheats. ctDNA variations were more intimately correlated with vegetative characters, whereas mtDNA variations were more closely correlated with reproductive characters. Plasmon divergence among the diploids of the two genera largely paralleled genome divergence. The relative times of origin of the polyploid species were inferred from genetic distances from their putative maternal parents.     

A new technology for fish preservation by combined treatment with electrolyzed NaCl solutions and essential oil compounds

This study was undertaken to establish a new technology, using pre-treatment with electrolyzed NaCl solutions and essential oil compounds, to extend the shelf-life of carp fillets. Samples of skinless carp fillets were treated with 100-fold (by weight) of electrolyzed NaCl solutions [cathodic solution, EW(−) and/or anodic solution, EW(+)] and 1% oil (0.5% carvacrol + 0.5% thymol) [1%(C + T)]. Then chemical [pH, volatile basic nitrogen, peroxide value, and thiobarbituric acid], microbiological (total viable count) and sensory analyses were used to evaluate the preservative effect of this new technology during storage at 5 and 25 °C. Our results from the chemical assays indicated that EW(−), followed by EW(+) and subsequently 1%(C + T) [EW(−)/EW(+)/1%(C + T)], significantly suppressed the lipid oxidation compared with other treatments. Data from sensory evaluation and microbiological assay showed that treatment with EW(−)/EW(+)/1%(C + T) extended the shelf-life of carp fillets to 16 and 1.3 days compared with 4 and 0.3 days for the control samples during storage at 5 and 25 °C, respectively.     

Bcl-2 relieves the trans-repressive function of the glucocorticoid receptor and inhibits the activation of CPP32-like cysteine proteases

Glucocorticoid induces apoptosis in immature lymphocytes which is inhibitable by Bcl-2. Although glucocorticoid-mediated signal transduction is well understood, the mechanism of the induction of apoptosis by the activated glucocorticoid receptor as well as the inhibition of apoptosis by Bcl-2 remains enigmatic. Here we report that overexpressed Bcl-2 relieves the glucocorticoid receptor-mediated repressive function on the AP-1 activity and completely inhibits the activation of CPP32-like cysteine proteases. In contrast, glucocorticoid receptor-mediated transactivation was not affected by Bcl-2. This suggests that glucocorticoid may induce apoptosis by repressing transactivation by AP-1 which is relieved by Bcl-2. Furthermore, we report evidence that, in contrast with CPP32-like proteases, ICE-like proteases are not involved in this apoptotic pathway.     

Fabricating high performance a-Si solar cells by alternately repeating deposition and hydrogen plasma treatment method

The performance of a p-i buffer layer in pin amorphous silicon solar cell was improved by the “alternately repeating deposition and hydrogen plasma treatment method (ADHT)”. The optical bandgap of the a-Si film was increased by hydrogen plasma treatement. The wide optical bandgap and the high photoconductive a-Si:H films without carbon could be fabricated by the ADHT method. The conversion efficiency of the solar cell with a-Si:H buffer layer was almost the same as that using an a-SiC:H buffer layer. Second, the a-Si (ADHT) films were applied to the n-i buffer layer. The insertion of a-Si (ADHT) films between the i-layer and the n-layer was effective to improve the cell performance, especially the fill factor. With the use of high performance a-Si p-i and n-i buffer layer deposited by ADHT method, a cell conversion efficiency of 12.9% was obtained.     

Self-organized dendritic patterns in the polymer Langmuir-Blodgett film

We report the formation of a self-organized dendritic pattern of nanometer thickness in polymer Langmuir-Blodgett (LB) films. Poly(N-dodecylacrylamide) (pDDA)/chloroform solution was spread on a water surface to form a stable polymer monolayer. A pDDA monolayer was deposited onto a hydrophilic silicon substrate by upward deposition from a water subphase, and a second layer was then deposited by downward deposition. The substrate with the two layers was withdrawn from a clean water surface at a high speed to form the dendritic pattern, which was imaged by atomic force microscopy. The height of the pattern, 3.5 nm, corresponds to the height of a bilayer pDDA LB film, suggesting that the pattern forms when the deposited outermost layer overturns by meniscus oscillation. A similar dendritic structure of narrower width and lower height was fabricated on a hydrophobic silicon substrate.     

Study on an after-laying test for a long-distance GIL

Technologies for the after-laying test of long-distance SF₆ gas insulated transmission line (GIL) have been developed for the detection of partial discharge (PD) and contact defects. We constructed a long (168 m) test line in a deep tunnel and clarified the propagation characteristics of PD signals through the GIL as well as the spatial sensitivity and S/N characteristics of PD sensors for locating metallic particles. We have also proposed the application of a fiber-optic temperature distribution sensor for locating contact defects and confirmed the validity of this sensor for the GIL test line     

基于制动时间间隔的ABS控制策略研究

制动强度大小是影响汽车制动安全性的重要因素.通过对制动过程的分析与仿真,提出了一种基于制动时间间隔为控制参数的ABS控制策略.制动过程中,通过改变制动力作用的时间间隔,使制动力的平均值变化.适应不同路面对制动强度的要求,达到防止车轮抱死,提高汽车制动时车辆的稳定性和操纵性的目的.