High performance films of cellulose butyral derivative having a necklace-like annular structure in the side chains

We fabricated high performance films using cellulose butyral (CB) synthesized from native cellulose. Two-step reactions were adopted to produce the derivative CB, including etherification of cellulose with glycidol in NaOH/urea aqueous solution to yield O-(2,3-dihydroxypropyl) cellulose (DHPC), and butyralization of DHPC. Both DHPC and CB products were easily processed into a thin film by hot-press molding. The butyral modifier significantly improved the tenacity of highly ductile DHPC, by virtue of the possible chain-entangling action of the ring structures in the stretching process. Thereby the film toughness was markedly enhanced. The CB films exhibited excellent optical transparency and a good adhesive property to glass plates. Thus the films may be comparable to commercial poly(vinyl butyral) (PVB) films in optical and mechanical performances and therefore possess a potential applicability as interlayer for laminated glasses.     

Effect of matrix metalloproteinase on autolysis of sea cucumber Stichopus japonicus

To investigate the relationship between matrix metalloproteinase (MMPs) and autolysis of sea cucumber Stichopus japonicus, the dermis homogenate was incubated at 25°C to induce autolysis. EDTA Na₂ and 1,10-phenanthroline were used to verify the effect of MMPs on autolysis, which was measured by soluble protein and protein pattern. Soluble protein level increased during a 6-h autolysis process. SDS-PAGE demonstrated obvious protein degradation with the concomitant occurrence of degradation products. The above two indicators could be inhibited significantly by EDTA Na₂ and 1,10-phenanthroline, indicating that MMPs might play a significant role in autolysis of sea cucumber.     

Development of a homogeneous competitive immunoassay for phosphorylated protein antigen based on the enhanced fluorescence resonance energy transfer technology

We describe a homogeneous competitive immunoassay for a phosphorylated protein antigen. The assay takes advantage of the enhanced fluorescence resonance energy transfer (FRET) technology, which has a unique characteristic that the FRET signal is increased by the specific interaction of two fluorolabeled leucine zippers. We chose extracellular signal-regulated kinase (ERK) as a model antigen and constructed two molecular probes in which either anti-phosphorylation site antibody or the antigen peptide was chemically conjugated to the enhanced FRET probes. While these molecular probes indicated sufficient FRET signal without antigen, they displayed a significant change in the fluorescent spectrum by mixing with phosphorylated antigens. With this competitive enhanced FRET immunoassay, a phosphorylated ERK concentration within the range from 15 nM to 250 nM could be determined. Because the assay is very simple, it would be applied to not only in vitro assay but also in vivo detection of protein phosphorylation.     

Hydrogen and carbon dioxide adsorption with tetra‐n‐butyl ammonium semi‐clathrate hydrates for gas separations

Gas adsorption rates of H₂, CO₂, and H₂‐CO₂ gas mixture (H₂/CO₂ = 3.4) with tetra‐n‐butyl ammonium salt (bromide, chloride, and fluoride) semi‐clathrate hydrate particles were measured at 269 K to assess their properties for gas separation. Equilibrium gas occupancies in the S‐cages of the particles were in order of (high to low) for hexagonal structure‐I, tetragonal structure‐I, and superlattice of cubic structure‐I structures with the maximum fractional occupancy by CO₂ being about 40%. The CO₂ diffusion rate depended on the anion size of the salt, which is attributed to distortion of the S‐cage that is close to the molecular size of CO₂. Simulations of semi‐clathrate hydrate particles with theory showed that H₂/CO₂ selectivities could be as high as 36 (3.0 mol% TBAF) and that selectivities for an ideal membrane (3.3 mol% TBAF) could be >100 (269 K, 0.3–4.5 MPa). Semi‐clathrate hydrates have wide application as separation media for gas mixtures. © 2014 American Institute of Chemical Engineers AIChE J, 61: 992–1003, 2015     

Dissolution properties of different compositions of biphasic calcium phosphate bimodal porous ceramics following immersion in simulated body fluid solution

Biphasic calcium phosphate (BCP) bimodal porous ceramics were prepared from a mixture of fine powders of hydroxyapatite (HAp) and beta-tricalcium phosphate (β-TCP) with varying HAp/β-TCP ratios. Two types of HAp powders and one type of β-TCP powder were used to produce porous BCP bioceramics with HAp/β-TCP weight ratios of 20/80, 40/60, and 80/20. Dissolution tests were performed to compare the dissolution properties of BCP-based bioceramics with different structural properties. Porous ceramic samples of approximately 0.5 g were individually soaked in 30 ml of simulated body fluid (SBF) solution at 36.5 °C for 1, 3, 7 and 10 days, respectively. The calcium content of the SBF solution was analyzed by ICP. The porous bodies were filtered, dried, and characterized using SEM, XRD, and FT-IR. The results indicate that the sample structural properties seem to have a greater effect than the storage environment on the dissolution properties.     

Tocopherol Content and Fatty Acid Distribution of Peas (<Emphasis Type="Italic">Pisum sativum</Emphasis> L.)

The positional distribution of fatty acids (FA) of triacylglycerols (TAG) and major phospholipids (PL) prepared from four cultivars of peas (Pisum sativum L.) were investigated as well as their tocopherol contents. The lipids extracted from these peas were separated by thin-layer chromatography (TLC) into seven fractions. The major lipid components were PL (52.2–61.3%) and TAG (31.2–40.3%), while the other components were also present in minor proportions (5.6–9.2%). γ-Tocopherol was present in the highest concentration, and α- and δ-tocopherols were very small amounts. The main PL components isolated from the four cultivars were phosphatidylcholine (42.3–49.2%), followed by phosphatidylinositol (23.3–25.2%) and then phosphatidylethanolamine (17.7–20.5%). Small but significant differences (P < 0.05) in FA distribution existed when different pea cultivars were determined. However, the principal characteristics of the FA distribution in the TAG and the three PL were evident among the four cultivars; unsaturated FA were predominantly located in the sn-2 position, and saturated FA primary occupied the sn-1 or sn-3 position in the oils of the peas. These results suggest that the regional distribution of tocopherols and fatty acids in peas is not dependent on the climatic conditions and the soil characteristics of the cultivation areas during the growing season.     

EFFECT OF FLUIDIZING PARTICLE ON DRYING CHARACTERISTICS OF POROUS MATERIAL IN FLUIDIZED BED

The drying characteristics of porous material in fluidized bed were examined theoretically and experimentally. The brick ball was used as the sample and immersed in the fluidized bed. The glass beads were used as the fluidizing particles and the particle diameters were changed. When the pore diameter of sample was relatively large, the fluidizing particles were adhered on the sample surface. In the theoretical analysis, the heat and mass transfers in adhered particle layer were considered. The fluidizing particles were adhered on the sample surface during the earlier period of drying. The sample temperature largely decreased when the mass of adhered particle decreased. The calculated results are in good agreement with experimental data. The diameter of fluidizing particle had a small effect on the drying time. The excess increments in drying gas temperature hardly contributed to shortening the drying time.     

Effects of rotating magnetic fields on thermocapillary flow: Comparison of the infinite and the Φ1–Φ2 models

Convection control of three-dimensional thermocapillary flow by a rotating magnetic field (RMF) was simulated numerically, and the RMF infinite and RMF Φ₁–Φ₂ models were compared. The results of using both RMF models demonstrate that the transverse RMF stirs convection in an azimuthal direction and suppresses convection in the axial direction, which is helpful for the three-dimensional melt convection to become axisymmetric. Compared to the RMF Φ₁–Φ₂ model, however, the over-simplified RMF infinite model leads to a relatively large deviation. With the same magnetic field (7 mT, 50 Hz), the RMF infinite model results in a larger azimuthal velocity and a smaller axial velocity.     

EFFECTS OF OPERATIONAL CONDITIONS ON DRYING CHARACTERISTICS IN CLOSED SUPERHEATED STEAM DRYING

The effects of operational conditions on the drying performance in closed superheated steam drying were examined theoretically and experimentally. The vapor generated from the sample was circulated in the drying chamber. In the theoretical analysis, the replacement of air with vapor in drying chamber and the convective vapor transfer in sample were considered. At the start of drying, the drying chamber was filled with air. As the drying proceeded, the air was replaced with the vapor generated from sample. The calculated results explained the characteristics of experimental data. The pore diameter of sample had little effect on the drying characteristics. During the internal evaporation period, the evaporation occurred in the narrow zone, which moved from the surface to the bottom of sample. The convective vapor transfer in sample had a significant influence on the drying performance. The excess increments in temperature and velocity of drying gas hardly contributed to shortening the drying time.     

Effect of packed structure on flow behaviour in a trickle bed biofilter

The effects of operation conditions on the flow behaviour in gas–liquid countercurrent trickle bed biofilter were experimentally examined. In order to prevent gas channelling in the biofilter, packings with a relatively large void fraction, which have a role to maintain a high void fraction in the bed, were added. The gas and liquid velocities of the packed structure and the packings were changed, and the residence time distributions (RTDs) of the gas and liquid were measured. It was found that the addition of void supporters was very effective in the suppression of gas channelling.