Verification of the energy-saving effect of the district heating and cooling system—Simulation of an electric-driven heat pump system

A district heating and cooling system (DHC) is expected to be a promising energy-saving measure for high-density business areas in Japan. However, it has not been verified what advantages of the DHC are important for energy conservation. The clarification of this issue is supposed to contribute to improving the energy efficiency of the DHC.     

Finding optimal SVR placement in distribution systems using power density model

In long distribution systems, Step Voltage Regulators (SVRs) are installed to regulate the system voltage. There are some papers on finding optimal placements of SVRs in the system. However, there is no analytic method that focuses on the voltage margin, that is, the optimal placement with respect to the system voltage. The authors propose a method of finding the placement of an SVR so that the voltage margin from the upper (or lower) voltage limit is the largest under heavy load. In order to deal with sets of loads that are dispersed over the entire distribution line, we derive the differential equation of the complex power and that of the voltage drop, which are expressed as functions of distance from a substation. The voltage profile is obtained as a cubic equation by solving the voltage equation if the load distribution is trapezoidal. The method of finding the optimal SVR placement distinguishes three modes with three different voltage profiles. One is the case in which the transformation ratio of the SVR is small and the system length is short, one is the case in which the transformation ratio of the SVR is large and the system length is short, and the third is the case in which the transformation ratio of the SVR is large and the system length is long. The optimal placement and tap position of the SVR are calculated by solving the above‐mentioned equations in these three modes. It is confirmed that the proposed analytical method is appropriate by model calculation results. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 158(4): 11–21, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20481     

Abnormality of electric field at a wedgelike edge of a conductor or a dielectric interface and methods for its relaxation

Abnormal electric field appears at a wedgelike edge of a conductor (electrode) or a dielectric interface, which usually becomes infinitely high. This paper analyzes the electric field near such an edge by the analytical variable separation method and by the numerical one of the charge simulation method. The analysis focuses on the special conditions where the electric field becomes zero at an edge. These conditions are important for the insulation design to suppress the discharge inception at such edges of conductors and dielectric interfaces. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(1): 1–8, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20280     

Development of mechanical properties of structural high-carbon low-alloy steels through modified heat treatment

The modified heat treatment, which produces a mixed structure of martensite and lower bainite through short-term isothermal transformation at just above the martensitic transformation temperature,M _s temperature, followed by oil quenching (after conventional austenitization), has been applied to three high-carbon low-alloy steels with different levels of nickel and chromium contents at similar molybdenum levels, in which carbon was allowed to replace relatively expensive additions of nickel and chromium, for their ultra-high strength application. The significant conclusions are as follows: an ultra-high strength steel of 1900 M Pa yieldstress grade with a high toughness level can be obtained when about 60 vol % lower bainite is associated with 473 K tempered martensite of 0.60% C-1.80% Ni-0.80% Cr-0.25% Mo steel. If approximately 25 vol % lower bainite appears in 673 K tempered martensite of the steel, a 1700 M Pa yield-stress grade steel with high toughness and moderate ductility levels can be attained. However, alloying nickel is essential to some extent for development of the mechanical properties with the modified heat treatment suggested in the present work.     

An advanced laser application for controlling of electric resistivity of thick film resistors

When electric resistivity of Thick Film Resistor (TFR) is adjusted to the desired value, laser beam is irradiated onto the resistor material so that a part of the resistor material is instantaneously vaporized and cut away. This conventional laser trimming method to adjust the resistivity of TFRs is an indispensable technique for manufacturing elec-tronic devices such as hybrid ICs. A peculiar phenomena was revealed by us, that is, when specially selected pulse laser beams were irradiated to TFR, the TFR was surface modified without cutting grooves, and then resistivity of the TFR was decreased. We completed the advanced laser process to apply this peculiar phenomena. 8 By comparing with conventional trimming processes, we can show prominent features of the advanced process, for example, resistivity of fine size TFR (300 micrometers-width and under) can be easily controlled. The decrease in resistivity of the TFR is considered to result from the decrease in specific resistivity of glass in the TFR. Because it is considered that the glass in the TFR is heavily doped with ruthenium impurities during the surface modification due to results of morphology observations and x-ray diffraction analysis. We have applied this advanced laser process to fine size TFR (300 micrometers-width), and developed high density hybrid ICs.     

Decreasing resistances of membrane-electrode assemblies containing hydrocarbon-based ionomers for improving their anodic performances

To improve methanol-oxidation performances of membrane-electrode assemblies composed of a hydrocarbon-based ionomers, the resistances involved in the reaction were decreased. Electrochemical impedance spectroscopy revealed that the proton-conductive resistance (R_i) in the anode was decreased from 0.54 to 0.40 Ω cm² by increasing a loading ratio of platinum-ruthenium to carbon support of anode catalyst from 54 to 73 wt.%. In addition, R_i was decreased to be 0.25 Ω cm² by increasing ion-exchange capacity (IEC) of the ionomer from 1.4 to 2.9 mequiv. g⁻¹. Consequently, the polarization resistance of the anode was significantly decreased, in turn, increasing current density of methanol oxidation at the potential of 0.45 V from 0.110 to 0.244 A cm⁻².     

Speed-up of computing time for numerical analysis of particle charging process by using discrete element method

The objective of this paper is to improve the computing time for numerical analysis of particle charging process by using discrete element method. The rule for ignoring the calculations of contact forces and updating trajectories of unmoved particles were discussed. When the relative displacement of a particle within certain calculation steps became less than 0.1% of particle radius, this particle was determined to be unmoved and the calculations of this particle were ignored. The computing time was improved significantly when this new method was used, and its calculation speed was more than two times faster than that of original. It was found that this speed-up method is more useful for the cases that the particle becomes unmoved in short time or the height of charged bed is large. The simulation of charging process in an industrial-scale surge hopper was studied by using new method, the calculation speed became 2.88 times faster than that of original, and the quite similar particle size segregation between original and new methods was given. This new method for speed-up of the charging process in DEM is very useful, and the charging processes of the industrial scale storages can be simulated by using this method.