Pentacene-based organic thin-film transistors

Organic thin-film transistors using the fused-ring polycyclic aromatic hydrocarbon pentacene as the active electronic material have shown mobility as large as 0.7 cm²/V-s and on/off current ratio larger than 10⁸; both values are comparable to hydrogenated amorphous silicon devices. On the other hand, these and most other organic TFT's have an undesirably large subthreshold slope. We show here that the large subthreshold slope typically observed is not an intrinsic property of the organic semiconducting material and that devices with subthreshold slope similar to amorphous silicon devices are possible     

Influence of the purity of the starting materials on the recording of dynamic holograms in Bi12TiO20 crystals

The parameters of Bi₁₂TiO₂₀ crystals grown with bismuth oxide of different degrees of purity were measured by a holographic recording technique in an external ac electric field and were compared with a crystal specially doped with chromium. Various crystal parameters such as the diffusion length of the photoexcited carriers and the Debye screening length were determined. It was found that the absorption spectrum of the material and the holographic recording efficiency were strongly influenced by light chromium doping and by insufficient purity of the starting mixture. Pis’ma Zh. Tekh. Fiz. 23, 27–32 (March 12, 1997)     

反常声电光频谱分析器

介绍了一种新型的反常声电光频谱分析器，它可以采用外加电压的办法改变器件的中心频率，扩大器件的频带宽度，并改善器件在频带宽度范围内的频率响应特性。用ＬｉＮｂＯ３制作了一个６０ＭＨｚ的反常声电光频谱分析器件，测试结果表明，器件中心频率可以由５０ＭＨｚ变到７０ＭＨｚ，频带宽度由原来的２６ＭＨｚ扩大到３７ＭＨｚ。     

An approach to the identifiable parameters of a manipulator

This article deals with the minimal parameters of a manipulator in the least squares sense, so that the minimal parameters are equivalent to the identifiable parameters. The least squares concept is used to introduce terminology for the minimal linear combinations (MLCs) of the system parameters that define a set of linear combinations of the system parameters. The number of elements of the set is minimal, yet the set still completely determines the system. Furthermore, it is shown that the problem of finding a set of MLCs of a manipulator can be simplified to that of finding two individual sets of MLCs that determine the entries of the inertia matrix and the gravity load. Although the approach is applied to the inertia constants of composite bodies to obtain a set of MLCs identical to an earlier one, the result is newly interpreted in the least squares sense. The approach itself is a new method for finding the identifiable parameters of a manipulator, and it yields some new insight into the manipulator dynamics. The crucial feature is that a set of MLCs found by using the present approach is guaranteed to be identifiable. The earlier approaches always require an identification method to verify the results. An equivalence theorem is also presented that rigorously states the equivalence between the different sets of minimal parameters. © 1994 John Wiley & Sons, Inc.     

基于知识的可重用构件查询系统KCQ

本文提出了一个基于知识的、支持面向对象程序设计方法的软件重用构件查询系统，本系统采用了语义网络知识表示模型，提供了构件知识表示语言ＣＫＲＬ，来描述可重用构件的特征和用于检索的知识．提供了语义网络联想式查询、条件查询和构件评价．     

小波分析及其在时变滤波和信号分离中的应用

利用小波变换具有的多时频分辨率特性，对地震勘探和测井信号这类非平衡信号进行分析，可以充分利用信号的时间－频率特性。文中介绍了小波变换的基本概念及其在地震勘探信号的时变滤波和声波全波列测井信号的信号分离中的应用，实例表明，小波变换在地球物理信号中具有广阔的应用前景。图５参７     

马来酸酐在乙丙橡胶上的接枝共聚

马来酸酐在乙丙橡胶上的接枝共聚,用过氧化苯甲酰为引发剂的效果优于偶氮二异丁腈。研究了温度、马来酸酐用量和引发剂用量等对接枝率的影响。用红外光谱和薄层色谱证明了接枝物的存在。用接触角技术测定了接枝物的表面性能。     

Effect of repositioning of rhodium direct-charge detectors in a RBMK-1000 reactor on fuel and emitter-material burnup coefficients

Scientific-Technical Center “Atomtekhénergo.” Leningrad Nuclear Power Plant. N. V. Sultanov Institute of Nuclear Reactors, Russian Scientific Center “Kurchatovskii institut.” Translated from Atomnaya énergiya, Vol. 76, No. 6, pp. 470–473, June, 1994.     

硝胺发射药燃速压力指数对内弹道性能的影响

通过将硝胺发射药实际的燃速方程,引入一维定常流、相对变量无量纲的经典内弹道计算程序,计算了RB型硝胺发射药在不同的压力指数及高压力指数区间下,弧厚、药量和挤进压力等起始条件变化对弹道性能的影响.结果表明,高压力指数能增加射击起始条件等参量对弹道性能的敏感性,而且随着高压力指数的增加及其区间的扩大而加剧.但也发现,在弹道性能上,密度为1.620g/cm~3的RB型硝胺发射药的燃速压力指数,对射击起始条件等参量的敏感性与三基药相接近,并未发现明显的弹道不一致性或安全性问题的征候.