Fracture toughness measurement with fatigue-precracked single edge-notched beam specimens of WC-Co hard metal

The plain-strain fracture toughness of WC-8%Co hard metal, K _IC, was measured using single edge-notched beam (SENB) specimens with fatigue precrack. The fatigue precrack was introduced with compressive fatigue cycling in four-point bending at room temperature. Since stable fatigue-crack propagation was obtained from the notch tip, it was easy to control the fatigue-precrack length. A reasonable K _IC value of 13.3 MPa m^1/2 was obtained with the fatigue-precracked SENB specimens in four-point bending. The compressive fatigue-precracking technique in four-point bending was simple and convenient, and is therefore applicable to precracking in a variety of brittle materials prior to fracture-toughness measurements.     

Primary hepatic carcinoid tumor

A case of primary carcinoid tumor arising in the liver of a 69 year old woman with no endocrine symptoms is reported. Histopathologically, the tumor was diagnosed initially as a hepatocellular carcinoma in the biopsy specimen, and was shown subsequently to be a carcinoid tumor, demonstrating diffuse positive staining with Grimelius method. Mucin stained with periodic acid-Schiff (PAS), alcian-blue, and mucicarmine, and was shown partially in the glandular structures. Immunohistochemically, most of the tumor cells stained positively for chromogranin-A, epithelial membrane antigen (EMA) and neuron specific enolase (NSE). Ultrastructural examination revealed electron-dense core granules, measuring 40-120 nm in diameter in some of the tumor cells. Intensive and careful searches pre- and post-operatively revealed no other primary source of tumor other than the liver. The patient was reported well with no symptoms 3 1/2 years after the operation. This case is considered to be a primary hepatic carcinoid tumor. The recent literature is reviewed, and the possible histogenesis of hepatic carcinoid tumor is discussed.     

Characterization of AlGaAs microstructure fabricated by AlGaAs/GaAsmicromachining

An AlGaAs/GaAs micromachining technique that is compatible with laser diode fabrication process is described. AlGaAs structural layers and GaAs sacrificial layers are prepared by metal organic vapor phase epitaxy. Reactive dry etching with chlorine is used to fabricate high-aspect structures. Peroxide/ammonium hydroxide solution is used for selective etching of the sacrificial layer. Since the epitaxial layer has low stress, precise undeformed microstructures are obtained. Good compatibility with the LD process makes it possible to integrate microcantilever beams with LD's without degradation of LD characteristics. Microcantilever beams of AlGaAs are characterized by directly measuring stiffness and natural frequencies. A fracture test is also performed on the AlGaAs microcantilever beams. The average fracture stress of AlGaAs is found to be 1 GPa at 1% strain, which shows that the material is strong enough to support the micrometer scale structures     

Stability of the TAR RNA and its complex with arginine

Most stable secondary structures and their stabilization energies of the TAR RNA with +1 to +104 nucleotide-sequence region were calculated at different temperatures by using thermodynamic parameters for RNA structure prediction. The most stable secondary structure has one bulge and one loop within the region of +20 to +40 nucleotide sequence, and its stabilization energy at 37 degrees C was -46.3 kcal mol-1. The interaction of a TAR bulge oligomer (TARBO) with arginine (Arg) which was in the binding site of a Tat protein was also investigated by CD measurements. The addition of Arg did not affect the CD spectrum of TARBO. The result was different from that of the RNA oligomer with both bulge and loop.     

Detection of hepatitis C virus RNA in the liver by in situ hybridization

To examine HCV infection histologically, we attempted non-radioactive in situ hybridization of HCV-RNA in the liver. We amplified cDNA probe (360 base pairs) by PCR using the primers deduced from the core region of the HCV genome. The probe was labelled with digoxigenin by PCR and used for in situ hybridization on paraformaldehyde-fixed frozen liver sections. The hybrids were visualized immunohistochemically with alkaline-phosphatase-conjugated anti-digoxigenin and alkaline-phosphatase substrates. HCV-RNA-cDNA hybrids were detected in 21 of 24 patients with positive serum HCV markers, whereas there were no positive signals in the liver of 12 cases without HCV infection. The signal intensity of HCV-RNA-cDNA hybrids was abolished after RNase treatment. Various other specificity experiments also verified specific hybridization of HCV-RNA-cDNA. HCV-RNA was visualized in liver cells and most of them were regarded as hepatocytes from their characteristic features. The infected hepatocytes were frequently associated with mononuclear cell infiltration. Hepatocytes positive for HCV-RNA were sometimes binuclear and distributed in various patterns among cases tested. The present in situ hybridization of HCV RNA is highly sensitive and specific and the results suggest the host immune response to HCV-infected cells.     

Optical data storage by novel photoelectrochromic polymer

A novel elastic polymer containing 4,4′-bipyridinium salts with tetrakis[3,5-bis(trifluoromethyl)phenyl]borate as part of the main chain was synthesized. The cast film showed persistent and reversible colour changes due to photoinduced electron transfer upon excitation of an ion-pair charge-transfer band (_ex >365 nm) in vacuo. The lifetime of the coloured state markedly depended on temperature. The optically written data were stored without decay below 0°C and were erased thermally at elevated temperatures. The colour changes were reversibly repeatable for many times.     

Sinterability and properties of Ti(N1−x,O x ) y -(V,Ta)C-Ni sintered alloys having a golden colour

The effect of oxygen and carbide addition on the sinterability of TiN _y (0.42<y<1)-Ni alloys, in which part of the nitrogen is replaced by oxygen was investigated. It was found that sinterability increased as the oxygen and carbide content increased, but the strength of the resultant sintered alloys was significantly reduced due to the presence of Ni₃Ti and Ti₂O₃ phases when the oxygen content exceeded 50 mol %. The sintered alloy with the highest hardness was found whenx=0.7,y=0.78 and the (V,Ta)C content was 18% by weight and this alloy was characterized by having a low density, good corrosion resistance and the colour of gold.     

Thiamine pyrophosphatase activity in the Golgi apparatus of calcitonin-treated osteoclasts.

The thiamine pyrophosphatase (TPPase) activity described by Novikoff and Goldfisher was examined in osteoclasts affected by calcitonin in order to elucidate whether the morphological and functional changes of the osteoclasts have an influence over the secretion function of their Golgi apparatus. The Golgi apparatus of osteoclasts of which the ruffled border had disappeared and bone resorption discontinued as the result of treatment with calcitonin showed a slight TPPase activity. The reaction products of the enzyme in these inactive osteoclasts were distinctly fewer than that of control osteoclasts, which were not affected by calcitonin. From these results, it is suggested that there may be a connection between the morphological and functional changes of osteoclasts and the secretion function of the Golgi apparatus.     

Effects of weak shear on hyperswollen lyotropic smectic liquid crystals

We have developed a Zimm-type viscometer specially designed for the simultaneous measurements of the structure factor and the viscosity of hyperswollen lyotropic liquid crystals under a very weak shear. We have investigated the shear effects on the layer undulation fluctuation in the lamellar structure and the transition from the anisotropic lamellar to the isotropic sponge phase. We have found a significant difference in the rheological properties between the lamellar and the sponge phase: The former exhibits non-Newtonian flow behavior, while the latter exhibits Newtonian behavior.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Application of boundary element method to 3-D problems of coupled thermoelasticity

This paper deals with a new boundary element method for analysis of the quasistatic problems in coupled thermoelasticity. Through some mathematical manipulation of the Navier equation in elasticity, the heat conduction equation is transformed into a simpler form, similar to the uncoupled-type equation with the modified thermal conductivity which shows the coupling effects. This procedure enables us to treat the coupled thermoelastic problems as an uncoupled one, A few examples are computed by the proposed BEM, and the results obtained are compared with the analytical ones available in the literature, whereby the accuracy and versatility of the proposed method are demonstrated.