Achieving 20% Efficiency for Low‐Temperature‐Processed Inverted Perovskite Solar Cells

Low‐temperature‐processed inverted perovskite solar cells (PVSCs) attract increasing attention because they can be fabricated on both rigid and flexible substrates. For these devices, hole‐transporting layers (HTLs) play an important role in achieving efficient and stable inverted PVSCs by adjusting the anodic work function, hole extraction, and interfacial charge recombination. Here, the use of a low‐temperature (≤150 °C) solution‐processed ultrathin film of poly[(9,9‐dioctyl‐fluorenyl‐2,7‐diyl)‐co‐(4,4′‐(N‐(4‐secbutylphenyl) diphenylamine)] (TFB) is reported as an HTL in one‐step‐processed CH₃NH₃PbI₃ (MAPbI₃)‐based inverted PVSCs. The fabricated device exhibits power conversion efficiency (PCE) as high as 20.2% when measured under AM 1.5 G illumination. This PCE makes them one of the MAPbI₃‐based inverted PVSCs that have the highest efficiency reported to date. Moreover, this inverted PVSC also shows good stability, which can retain 90% of its original efficiency after 30 days of storage in ambient air.     

Dermoid cysts of the ovary with malignant transformation: MR appearance

OBJECTIVE: This study presents the MR appearances of five women with a total of six proven dermoid cysts of the ovary with malignant transformation. To our knowledge, the MR findings of this entity have not been reported. CONCLUSION: The lesions appeared to be fat-containing tumors with a solid component (4/6) that extended transmurally (4/6) and extensively invaded neighboring pelvic organs (3/6). The supervening malignancy was squamous cell carcinoma in four tumors, melanoma in one, and transitional cell carcinoma in one. The mode of spread differed from that of common ovarian tumors in that it included transmural extension and local invasion, reflecting squamous cell carcinoma.     

Increased-contrast, high-spatial-resolution, diffusion-weighted, spin-echo, echo-planar imaging

An insertable head gradient coil with a maximum gradient amplitude of 45 mT/m and a rise time of 150 musec along all three major axes was used to collect high-spatial-resolution, single-shot, spin-echo, echo-planar, diffusion-weighted magnetic resonance images with b values ranging from 0 to 2,200 sec/mm2. Improvements in spatial resolution allowed better visualization of large white matter tracts and their relation to adjacent anatomic structures. Excellent contrast and anatomic detail were revealed for most structures in the brain when a sufficient number of acquisitions were collected.     

Investigation of soil deformation characteristics during pullout of a ribbed reinforcement using X-ray micro CT

Steel-strip reinforced earth walls stabilize through the pullout resistance of the reinforcements. Soil dilation during the pullout of ribbed reinforcements may contribute to the evolution of pullout resistance; however, few studies have clarified this mechanism by investigating how soils behave with increasing pullout displacement. The ribs of the reinforcements enhance the pullout resistance, although the influence of the rib dimensions on the evolution of pullout resistance with increasing pullout displacement has not been sufficiently revealed. In the present study, a triaxial pullout apparatus is developed and pullout tests are conducted using ribbed reinforcements with different rib-inclination angles under isotropic stress. The displacement and strain fields in the soils during the pullout of the reinforcements are investigated by X-ray micro CT and a digital image correlation technique. It is found that larger rib-inclination angles provide higher pullout resistance at an early stage of the pullout because of the higher bearing resistance related to the more significant soil densification above the ribs. With increasing pullout displacement, the reinforcements with different rib-inclination angles come to behave as almost one in the same since a rigid soil wedge related to the passive soil failure is generated above the ribs. This tendency results in similar soil deformation characteristics and pullout resistance levels for every reinforcement beyond the soil failure state, although the rib-inclination angles are different.     

Dicyano-functionalized chlorophyll derivatives with ambipolar characteristic for organic photovoltaics

Two ambipolar chlorophyll derivatives, namely, 3²,3²-dicyano-pyropheophorbide-a (Chl-1) and methyl 13¹-deoxo-13¹-(dicyanomethylene) pyropheophorbide-a (Chl-2), were synthesized for use as either the electron acceptor or the electron donor in organic planar-heterojunction solar cells. Despite the higher electron mobilities of these chlorophyll derivatives compared with their hole mobilities, devices using them as the electron donor with fullerene C₇₀ give much better photovoltaic performance than when they are used as the electron acceptor with copper phthalocyanine. In these Chl-based solar cells, the energy gap between the LUMO levels of the donor and acceptor molecules substantially affects the charge separation and resultant photocurrent and photovoltaic performance. The highest solar energy-to-electricity conversion efficiency of up to 2.3% has been achieved using the Chl-2/C₇₀ solar cell, under AM1.5 solar illumination (100 mW/cm²) after thermal annealing of the device. It was also confirmed that the electron mobility of blend films containing Chls and fullerene derivative PC₇₀BM was determined not only by the electron mobility of PC₇₀BM but also by that of Chls.     

Phase Correction for High Precision Measurement of Iron Loss Using H‐coil Method

The accurate magnetic properties of electrical steel sheets are important for the development of high‐efficiency electromagnetic devices. In particular, the H‐coil method is a useful technique for accurately measuring magnetic field strength in a single sheet tester. Therefore, we developed a tester for magnetic field properties using the H‐coil method, referred to as the stress load type single sheet tester (S‐SST), and a problem was found in iron loss measurement at a high flux density of 1.6 T or more. In this paper, it is shown that the cause of this problem is the phase difference between the induced voltage in the H‐coil and the B‐coil. Because the phase difference makes the B–H loop slightly twisted near the tip point, the iron losses are evaluated low. Thus, we propose a method of determining the phase correction values. These values are measured in the absence of a specimen in the S‐SST measurement system, and the phase correction method for induced voltage in a coil is investigated. Finally, ideal results for the correction of iron loss in nonoriented electrical steel sheets are shown. The proposed method is effective for the calibration of a single sheet tester using the H‐coil method.