A new voltage control equipment using fuzzy inference

Power system control equipment needs higher sensitivity and operational reliability. Advanced voltage control equipment is needed for reducing the frequency of tap changes and improving the characteristics (the relationship between the actual voltage and reference voltage) of the voltage to meet today's power system requirements. However, these objectives are in a trade-off relationship. Studies of voltage control derived from a knowledge base suitable for electric power systems can satisfy these objectives using fuzzy inference. Compared with corresponding conventional equipment, the new equipment improved the deviation of 30 min average voltage of 30 percent. This paper describes the design concept of new voltage control equipment using fuzzy inference. In addition, field test results are described along with rules of fuzzy inference, membership functions, and the deviation of 30 min average voltage through detailed simulation.     

Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free solders

Low-cycle fatigue (LCF) tests on as-cast Sn-3.5Ag, Sn-3Ag-0.5Cu, Sn-3Ag-0.5Cu-1Bi, and Sn-3Ag-0.5Cu-3Bi solders was carried out using a noncontact strain-controlled system at 20°C with a constant frequency of 0.1 Hz. The addition of Cu does not significantly affect the fatigue life of eutectic Sn-Ag solder. However, the fatigue life was significantly reduced with the addition of Bi. The LCF behavior of all solders followed the Coffin-Manson relationship. The fatigue life of the present solders is dominated by the fracture ductility and can be described by the ductility-modified Coffin-Manson’s relationship. Steps at the boundaries of dendrite phases were the initiation sites for microcracks for Sn-3.5Ag, Sn-3Ag-0.5Cu, and Sn-3Ag-0.5Cu-1Bi solders, while for Sn-3Ag-0.5Cu-3Bi solder, cracks initiated along both the dendrite boundaries and subgrain boundaries in the dendrite phases. The linking of these cracks and the propagation of cracks inside the specimen occurred both transgranularly through eutectic phases and intergranularly along dendrite boundaries or subgrain boundaries.     

Identification of osteopontin in human dental calculus matrix

Osteopontin is a prominent non-collagenous component of bone matrix, although it is expressed in several other tissues. Recently, osteopontin was reported to be involved in urinary stone formation and atherosclerotic lesions of the aorta, suggesting that it may be a key protein associated with these types of pathological mineralization. In this study, whether or not human dental calculus contains osteopontin was investigated by immunoblotting and immunohistochemical analyses. After extraction of calculus proteins with EDTA and separation of the proteins by electrophoresis, immunoblotting analysis revealed the presence of osteopontin. Two forms of osteopontin appeared at 61 and 68 kDa on 10% polyacrylamide gel and the proteins were digested with thrombin, a highly specific protease. Moreover, immunohistochemical analysis revealed that osteopontin was localized in dental calculus adherent to tooth roots. These findings indicate that osteopontin is, in fact, present in human dental calculus and may be involved in calculus formation as the stone matrix.     

Screening of Inhibitors Targeting Heat Shock Protein 47 Involved in the Development of Idiopathic Pulmonary Fibrosis

Heat shock protein 47 (HSP47), a collagen-specific molecular chaperone, is causally related to fibrotic diseases, including idiopathic pulmonary fibrosis. The identification of Compounds that interfere with the HSP47-collagen interaction is essential for the development of relevant therapeutics. Herein, we prepared human HSP47 as a soluble fusion protein expressed in E. coli and established an assay system for HSP47 inhibitor screening. We screened a natural and synthetic Compound library established at Nagasaki University. Among 1023 Compounds, 13 exhibited inhibitory activity against human HSP47, of which three inhibited its function in a dose-dependent manner. Epigallocatechin-3-O-gallate, one of these three Compounds, is a typical polyphenol Compound derived from tea leaves. Structurally related Compounds were synthesized and examined for their activity, revealing a hydroxyl group at A-ring position 5 as important for its activity. The present findings provide valuable insight for the development of natural product-derived therapeutics for fibrotic diseases, including idiopathic pulmonary fibrosis.     

Synthesis of High-Purity Zirconium Fluoride for Fluoride Glass Fibers by Chemical Vapor Deposition

A technique for synthesizing ultra-high-purity ZrF₄ using chemical vapor deposition in a ZrBr₄–HF system is developed and a purification mechanism is clarified. The Fe concentration in ZrF₄ is evaluated at less than 10 ppb based on analysis of the transmission loss spectrum of a fiber prepared using synthesized ZrF₄. Purification is achieved mainly in a sublimation process of ZrBr₄, and purification efficiency is determined by sublimation temperature and activity of impurities in ZrBr₄. The concentration of transition-metal impurities in ZrF₄, synthesized by chemical vapor deposition in the ZrBr₄–HF system, is expected to be less than 1 ppb.     

In Situ Observation of Zirconia Particles at 1200°C by High-Resolution Electron Microscopy

Zirconia (ZrO₂) particles (average diameter, 30 nm) were observed in an in situ heating experiment up to 1200°C using a 400-kV high-resolution electron microscope. Thermal vibration of atoms on a (001) surface plane was observed at 1100°C. At 1200°C, grain growth and sintering phenomena were recorded on a videotape, showing (100) lattice planes migrating on a surface of a particle. Direct observation of the sintering process on a lattice level was accomplished for the first time.     

Reactions of phenols with tung oil

As regards the aromatic ring substitution reactions of various kinds of phenols with tung oil under acidic conditions, an investigation was made on the influences of the kinds and substitution positions of alkyl groups of the phenlos on the reaction. Alkyl phenols increased in reactivity in the order of ortho, meta, and para in the position of alkyl substitution. This can be attributed to the preferential para addition of tung oil to the phenol nucleus as reported in the previous paper. The larger alkyl group gave increased reactivities in the reactions of alkyl phenols with tung oil. This has something to do with compatibilities between phenols and tung oil (differences in solubility parameter between phenols and tung oil).     

Conformational studies of poly(N-methyl-l-alanine) by n.m.r. spectroscopy

Nuclear magnetic resonance (n.m.r.) and circular dichroism of $\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ in methylene $\text{chloride}\text{-d}{}_2\text{dichloroacetic acid}$ were investigated. In methylene chloride-d₂$\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ was found to consist of nearly all-trans amide bonds and assume a stable secondary structure. Trace amounts of cis amide bonds were also present. The addition of dichloroacetic acid destroyed the secondary structure and induced a drastic change of the n.m.r. spectrum, which was similar to that observed with the monomeric amide, $\text{N-}\text{acetyl}\text{-N-}\text{methyl-}\text{l}\text{-alanine}$ dimethylamide. In comparison of the polymer with the monomeric amide, it was concluded that the transition of $\text{poly}\text{(N-}\text{methyl-}\text{l}\text{-alanine}\text{)}$ was caused by the isomerization of amide bonds. The complex n.m.r. spectrum was interpreted in terms of the distribution along the polymer chain of various non-planar amide links as well as planar cis and trans amide links. The difference of the mechanism of conformational transition between poly(amino acid) and poly(imino acid) is also discussed.     

Gap symmetry and intrinsic intraplane pinning of untwinned YBa2Cu3O7 single crystals

The interplane (cb) and intraplane (ab) anisotropy of untwinned YBa₂ Cu₃0₇ single crystals has been investigated by means of the torque magnetometry. To extract the reversible and irreversible components, the torque was measured as a function of increasing angle as well as decreasing angle. The interplane irreversible torque _irr shows two-fold peaks at _c =90 ° and270 ° (of half width11 ° at77 K) due to the well-known intrinsic interplane pinning. A novel intrinsic pinning has been discovered in the intraplane irreversible torque, i.e., _irr shows four-fold peaks of half width20° at77 K when _a =0 °, 90 °, 180 ° and270 °. We argue that the intrinsic intraplane pinning comes from the four-fold nature of the gap parameter.     

Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)