Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Iterative Path Integral Approach to Nonlinear Stochastic Optimal Control Under Compound Poisson Noise

Nonlinear stochastic optimal control theory has played an important role in many fields. In this theory, uncertainties of dynamics have usually been represented by Brownian motion, which is Gaussian white noise. However, there are many stochastic phenomena whose probability density has a long tail, which suggests the necessity to study the effect of non‐Gaussianity. This paper employs Lévy processes, which cause outliers with a significantly higher probability than Brownian motion, to describe such uncertainties. In general, the optimal control law is obtained by solving the Hamilton–Jacobi–Bellman equation. This paper shows that the path‐integral approach combined with the policy iteration method is efficiently applicable to solve the Hamilton–Jacobi–Bellman equation in the Lévy problem setting. Finally, numerical simulations illustrate the usefulness of this method.     

Preparation of oriented gold plate/cellulose nanofiber composite films by using TEMPO-oxidized cellulose nanofiber as a reducing agent

Microsystem Technologies - TEMPO-oxidized cellulose nanofiber (TOCN) has been drawing much attention as a useful material for preparation of transparent and stiff films or substrates. In this work,...     

Pervaporation via silicon-based membranes: Correlation and prediction of performance in pervaporation and gas permeation

Pervaporation (PV) is a membrane technology that holds great promise for industrial applications. To better understand the PV mechanism, PV dehydrations of various types of organic solvents (methanol, ethanol, iso-propanol, tert-butanol, and acetone) were performed on five types of organosilica and two types of silicon carbide-based membranes, all with different pore sizes. Water permeance was dependent on the types of organic aqueous solutions, which suggested that organic solvents penetrated the pores and hindered the permeation of water. In addition, water permeance of various types of membranes in PV was well correlated with hydrogen permeance in single-gas permeation. Furthermore, a clear correlation was obtained between the permeance ratio in PV and that in single-gas permeation, which was confirmed via the modified-gas translation model. These correlations make it possible to use single-gas permeation properties to predict PV performance.     

Improvement of stability for organic solar cells by using molybdenum trioxide buffer layer

We demonstrated that the stability of organic solar cells (OSCs) under light irradiation is markedly enhanced by inserting a molybdenum trioxide (MoO₃) buffer layer between an anode layer of indium tin oxide (ITO) and a p-type layer of 5,10,15,20-tetraphenylporphyrin (H₂TPP) or N,N'-di(1-naphthyl)-N,N'-diphenylbenzidine (α-NPD). The use of the MoO₃ layer also enhanced open-circuit voltages and power conversion efficiencies of the OSCs due to an increase in built-in potential. From results of stability test of hole-only α-NPD devices, we concluded that the OSC degradation occurs near the ITO/p-type layer interface and that the use of the MoO₃ layer can prevent the degradation at this interface.     

Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

A reconstruction algorithm from truncated projections

A new tomographic reconstruction method is proposed which permits the reconstruction of a region of interest within a slice from partially truncated scanning data. This method utilizes two types of source data, namely a series of truncated projections and the outline of the object's cross section. The principle of this algorithm is to estimate the outside area of truncation in one projection from the projection data of the other viewing angles and the outline data of the object. The above estimation is accomplished by following two repeated procedures: 1) the modification of the calculated projection data compared each time with the already measured projection data of the truncated area, and 2) the modification of the reconstructed image compared also each time with the shape of the object. Computer simulation shows the convergence of the results obtained by this algorithm thus verifying its validity, and a reconstructed image after iterative processes exhibits good quality.     

Reinforcement of polypropylene by cellulose microfibers modified with polydopamine and octadecylamine

Cellulose microfibers (CMFs) having surfaces modified with polydopamine (PDPA) and octadecylamine (ODA) were prepared, and their reinforcing abilities for polypropylene (PP) were investigated. The PDPA coating was made via self-polymerization of dopamine (P-CMF), and subsequent alkylation was conducted by the reaction with ODA (OP-CMF). The modified CMFs exhibited improved dispersibility in the PP matrix due to the reduced hydrophilicity. The OP-CMF/PP composite prepared by batch mixing had a higher tensile modulus compared to that for the pure PP and composites with unmodified CMFs. However, excess alkylation lowered the tensile modulus, and the presence of an optimal degree of alkylation was demonstrated. The CMF/PP-IM composites fabricated by injection molding exhibited improved tensile properties compared to those prepared by batch mixing. Both the tensile modulus and yield stress were increased by increasing the CMF content and improved by the surface modification of the CMFs.     

Optical and electronic properties of cobalt-doped zinc oxide films prepared by the sputtering method

In-doped ZnO, Co-doped ZnO and Li-doped NiO are successively deposited on quartz by the sputtering method. A current versus voltage curve of the three-layer device, in which the Indoped ZnO and Li-doped NiO are used as electrodes, reveals that the In-doped ZnO is an ohmic electrode and the Li-doped NiO is a blocking electrode with respect to electron injection. In photocurrent spectra of the three-layer device, there are two distinct peaks around 410 and 640 nm. The former is ascribed to the photoionization caused by the electric-dipole transition from the ground states,⁴A₂(F), to the conduction band, and the latter to the thermal emission from electronic excited states of Co²⁺,⁴T₁(P).