凿岩钎具存在的问题及改进措施

分析叙述了凿岩钎具损坏的形式和原因。并从设计、制造、选材和操作技术等方面提出了相应的改进措施。从而有效地提高了凿岩钎具的制造质量，延长了使用寿命。     

电子商务对企业集团营销手段的影响

介绍了电子商务，以及目前电子商务的发展趋势及对社会的影响，特别阐述了蓬勃发展的电子商务对企业集团的经营环境与手段的影响。     

SO_4~(2-)(S_2O_8~(2-))/Fe_2O_3-SiO_2固体超强酸对乙酸/丁醇酯化反应的催化性能研究

研究了SO2 -4/Fe2 O3 SiO2 固体超强酸对乙酸 /丁醇酯化反应的催化作用 ,得到合适的工艺条件 :复合氧化物中n(Fe)∶n(Si) =1∶2 ,浸渍的H2 SO4浓度 1mol/L ,5 5 0℃预焙烧活化 3h ,催化剂用量 0 .8g ,酯化反应时间 4h ,乙酸的转化率达 96 .3%。在此条件下制得S2 O2 -8/Fe2 O3 SiO2 固体超强酸催化剂 ,并考察了其催化活性 ,实验结果显示该固体超强酸具有更高的催化活性 ,乙酸转化率高达 98.6 %。     

声光技术在光纤系统中的应用

本文简要介绍了在光纤通信、光纤传感和光纤信号处理枝术等各种光纤系统中可能开发应用的固体声光技术和光纤声光技术。     

Steady laminar flow in a 90 degree planar branch

The flow characteristics of a Newtonian fluid in a two-dimensional, planar, right angled Tee branch are studied over a range of inlet Reynolds number of 10–800 by solving the Navier-Stokes equations using a finite element discretization. The effects of the branch length and the grid size on the interior flow field are examined to assess the accuracy of the solutions. In one case the computed velocity field is compared with the Laser Doppler anemometry measurements available in the literature and excellent agreement has been obtained. The computed velocity field is believed to be accurate within about 5%. Results are presented for two types of experimentally realizable boundary conditions—viz. equal exit pressure at the outlet of each branch and specified flow split between the branches. For the case of equal exit pressures the fractional flow in the main duct increases with increasing Reynolds number and the flow characteristics in the side branch become akin to that in a cavity. For the case of specified flow split, the number, size and strength of the recirculation zones increase as more fluid is forced to go into the side branch. The length of the side branch appears to have very little influence on the interior flow field, particularly at higher Reynolds number. This observation is rationalized as being due to the parabolized approximation becoming more valid at higher Reynolds numbers. The critical Reynolds number at which the first recirculation zone appears in the side branch increases with increasing fractional flow in the side branch and with decreasing side branch width.     

崇礼东坪黄金公司缓倾斜薄矿体采空区综合治理

在采空区调查的基础上,以FLAC工程力学分析软件为手段,应用“诱导崩落和封闭采空区综合治理”理论,进行缓倾斜薄矿体采空区综合治理研究.该项研究与实践为缓薄矿体采空区综合治理提供了可供借鉴的经验,并为矿山创造了可观的经济效益.     

Effects of arylthio-and arylseleno(methoxy)methanes on acid corrosion of CT 3 steel

The effects of various arylthio-and arylseleno(methoxy)methanes on corrosion of CT3 steel in sulfuric and hydrochloric acid solutions were studied by gravimetric and voltammetric methods. Some compounds of theses classes were found to be effective inhibitors of the acid corrosion of CT3 steel. The presence of the-X-CH₂-O-CH₃ groups (X = S or Se) in aromatic amines and their derivatives enhanced their inhibitive properties. However, because these groups are highly hydrophobic, the molecules of inhibitors should contain other fragments that ensure sufficient solubility. Original Russian Text ? I.N. Chernyad’ev, A.B. Shein, A.N. Nedugov, 2007, published in Zashchita Metallov, 2007, Vol. 43, No. 3, pp. 285–289.     

转炉煤气风机叶轮故障诊断及处理措施

对转炉煤气风机叶轮故障进行诊断,分析了故障产生的原因,提出了处理措施,延长了设备使用寿命。     

基于波动方程的聚焦点控制照明叠前深度偏移

 基于波动方程的聚焦点控制照明叠前深度偏移技术借助于差分计算，把速度、密度等介质参数的影响体现在差分计算的矩阵方程中，能够自动适应速度场的任意变化，快速傅里叶变换的使用也加速了波场延拓的计算速度。因此此法兼具有限差分偏移方法和傅里叶偏移方法的优点，既可适应速度场的剧烈变化，又可保证对陡倾地层的成像效果，是目前针对复杂构造最有效的成像方法之一。对于单个聚焦点及其周围的成像步骤为：①采用矩形网格情况下绕射走时的有限差分计算方法生成合成算子；②应用合成算子来合成面炮震源和面波记录；③对合成的面炮震源和面波记录做傅里叶有限差分法波动方程叠前深度偏移，得到该聚焦点及其附近区域的成像结果。按照上述成像步骤，将震源波场和炮集记录依据相应的外推公式进行延拓，最终应用成像条件求取成像值。在地质目标处选取多个聚焦点，可以得到面向目标的控制照明偏移成像，在多个层位上选取多个聚焦点进行控制照明叠前深度偏移，可以得到整块区域的成像。通过对Marmousi模型的试算，取得了较好的效果。