Determination of Polycyclic Aromatic Hydrocarbons (PAHs) in Olive and Refined Pomace Olive Oils with Modified Low Temperature and Ultrasound-Assisted Liquid–Liquid Extraction Method Followed by the HPLC/FLD

The cleanup method of modified low temperature was compared with the standardized method of modified ultrasound-assisted liquid–liquid (UALL) extraction for the analysis of 15 polycyclic aromatic hydrocarbons (PAHs) in olive oil and refined pomace olive oil. The modified UALL extraction consisted in purification on C₁₈ reversed-phase, Florisil-bonded-phase and NH₂ cartridges, and modified low-temperature extraction was followed by alumina-N and NH₂ solid-phase extraction (SPE) cartridges. Both methods are followed by reversed-phase high-performance liquid chromatography with fluorescence detection. The chromatograms of the final extracts showed lower interferences in both of the methods. The solvent consumption and cost for the modified UALL method were higher than those of the modified low temperature, and also, it needed more equipment, but its analysis time was less. The limit of detection and limit of quantitation of the modified UALL method were 0.16–0.97 and 0.57–2.93 μg kg^?1, respectively, and for the modified low temperature, they were 0.09–1.97 and 0.29–5.99 μg kg^?1, respectively. The PAH recoveries for the modified UALL extraction method ranged from 75.0 to 111.0 % (RSD?=?3–8 %), and for the modified low temperature, they ranged from 81.5 to 113.8 % (RSD?=?3–10 %).     

Comparing the Effects of Microwave and Conventional Heating Methods on the Evaporation Rate and Quality Attributes of Pomegranate (<Emphasis Type="Italic">Punica granatum</Emphasis> L.) Juice Concentrate

Pomegranate juice was concentrated by conventional heating and microwave heating at different operational pressures (12, 38.5, and 100 kPa), and their effects on evaporation rate and quality attributes of concentrated juice were investigated. The final juice concentration of 40° Brix was achieved in 140, 127, and 109 min at 100, 38.5, and 12 kPa, respectively, by using conventional heating. Applying microwave energy decreased required times to 118, 95, and 75 min. The changes in color, anthocyanin content, and antioxidant capacity during concentration processes were investigated. L*, a*, and b* parameters were measured to estimate the intensity of color loss. All Hunter color parameters decreased with time. Results showed that the degradation of color, anthocyanins, and antioxidant activity were more important in conventional heating compared to microwave heating method. Degradation rates increases by increasing process pressure. A first-order kinetics model was applied to modeling changes in total solid content, anthocyanin content, and antioxidant capacity.     

Drug‐loaded microparticles prepared by the one‐step deposition of calcium carbonate/alginate onto cotton fabrics

Calcium carbonate (CaCO₃)/alginate inorganic–organic hybrid particles were synthesized and deposited on to the surface of cotton fabrics with a novel one‐step procedure. The effects of the Ca²⁺/CO₃^2?/alginate molar ratio on the cotton matrix were investigated. The optimization of the process resulted in a regular shaped hybrid microparticles, and scanning electron microscopy revealed that the particles were uniformly distributed on the surface of the fibers. Dynamic light scattering showed that the particles were about 2 μm in diameter. Moreover, transmission electron microscopy images demonstrated that the core–shell structure of the particles existed along with CaCO₃ evenly enfolded into the alginate layer. An X‐ray diffraction pattern displayed that the alginate/CaCO₃ hybrid microparticles were a mixture of calcite and vaterite crystal. Fourier transform infrared spectroscopy indicated that CaCO₃/alginate hybrid particles formed in situ were the only deposited materials. The thermogravimetric analysis curve indicated a certain mass ratio of the alginate and CaCO₃ in the hybrid particles. Furthermore, the drug‐loading and drug‐release properties of the hybrid microspheres were studied, and the results show that the water‐soluble diclofenac sodium could be effectively loaded in the hybrid microparticles and the drug release could be effectively sustained. Finally, both of the microparticles and modified fabrics had good cytocompatibility. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42618.     

Heterogeneous catalysts with programmable topologies generated by reticulation of organocatalysts into metal-organic frameworks: The case of squaramide

A well-established strategy to synthesize heterogeneous,metal-organic framework(MOF)catalysts that exhibit nanoconfinement effects,and specific pores with highly-localized catalytic sites,is to use organic linkers containing organocatalytic centers.Here,we report that by combining this linker approach with reticular chemistry,and exploiting three-dimensioanl(3D)MOF-structural data from the Cambridge Structural Database,we have designed four heterogeneous MOF-based catalysts for standard organic transformations.These programmable MOFs are isoreticular versions of pcu IRMOF-16,feu UiO-68 and pillared-pcu SNU-8X,the three most common topologies of MOFs built from the organic linker p.p'-terphenyldicarboxylic acid(tpdc).To synthesize the four squaramide-based MOFs,we designed and synthesized a linker,4,4’-((3,4-dioxocyclobut-1-ene-1,2-diyl)bis(azanedyil))dibenzoic acid(Sq_tpdc),which is identical in directionality and length to tpdc but which contains organocatalytic squaramide centers.Squaramides were chosen because their immobilization into a framework enhances its reactivity and stability while avoiding any self-quenching phenomena.Therefore,the four MOFs share the same organocatalytic squaramide moiety,but confine it within distinct pore environments.We then evaluated these MOFs as heterogeneous H-bonding catalysts in organic transformations:a Friedel-Crafts alkylation and an epoxide ring-opening.Some of them exhibited good performance in both reactions but all showed distinct catalytic profiles that reflect their structural differences.     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Simultaneously energy production and dairy wastewater treatment using bioelectrochemical cells: In different environmental and hydrodynamic modes

A successful design, previously adapted for treatment of complex wastewaters in a microbial fuel cell (MFC), was used to fabricate two MFCs, with a few changes for cost reduction and ease of construction. Performance and electrochemical characteristics of MFCs were evaluated in different environmental conditions (in complete darkness and presence of light), and different flow patterns of batch and continuous in four hydraulic retention times from 8 to 30 h. Changes in chemical oxygen demand, and nitrate and phosphate concentrations were evaluated. In contrast to the microbial fuel cell operated in darkness (D-MFC) with a stable open circuit voltage of 700 mV, presence of light led to growth of other species, and consecutively low and unsteady open circuit voltage. Although the performance of theMFC subjected to light (L-MFC)was quite lowand unsteady in dynamic state (internal resistance = 100 Ω, power density = 5.15 W·m^-3), it reached power density of 9.2 W·m^-3 which was close to performance of D-MFC (internal resistance = 50 Ω, power density = 10.3 W·m^-3). Evaluated only for D-MFC, the coulombic efficiency observed in batch mode (30%) was quite higher than the maximum acquired in continuous mode (9.6%) even at the highest hydraulic retention time. In this study, changes in phosphate and different types of nitrogen existing in dairy wastewater were investigated for the first time. At hydraulic retention time of 8 h, the orthophosphate concentration in effluent was 84% higher compared to influent. Total nitrogen and total Kjeldahl nitrogen were reduced 70% and 99% respectively at hydraulic retention time of 30 h, while nitrate and nitrite concentrations increased. The microbial electrolysis cell (MEC), revamped from D-MFC, showed the maximum gas production of 0.2 m³ H₂·m^-3·d^-1 at 700 mV applied voltage.     

Newly designed polyacrylamide/dextran gels for electrophoresis protein separation: synthesis and characterization

Newly designed gels for electrophoresis protein separation were synthesized from acrylamide, N,N′‐methylenebis (acrylamide) and dextran mixtures. Radical polymerization was initiated by ammonium persulfate and N,N,N′,N′‐tetramethylethylenediamine. The time dependence of absorbance during polymerization was monitored using UV‐visible spectroscopy. The exothermic polymerization process exhibited a sharp rise of temperature reminiscent of the Trommsdorff effect. The swelling kinetics of the synthesized gels was examined in deionized water and buffer solutions. One of the challenges was to find an alternative to commercial products, sold as mixtures with no detailed chemical contents, commonly used in sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS‐PAGE) for protein separation. For this reason, a systematic comparison was made of the properties of one of the most commonly used commercial gels, Duracryl^? from Genomics Solution Inc., and those of the synthesized polyacrylamide/dextran gels. Copyright © 2011 Society of Chemical Industry