衰减曲线分析的诺模图

基于Arps递减方程,建立了衰减曲线分析的诺模图。应用该诺模图,可以方便地确定油气田的可采储量。     

一个低电阻率油气藏的测井评价

根据J油田大量岩芯分析资料,应用油藏流体分布理论和毛管压力计算方法,研究该油田低电阻率油气层的形成原因认为:地层水矿化度高(多数>20万ppm);微细孔隙发育,束缚水含量高;粘土矿物含量高且分布在碎屑颗粒表面等是形成低电阻率油气层的主要原因.一般常规测井评价时,对这种低电阻率油气层容易误释而丢弃.依据油气藏流体分布原理,应用毛管压力方法计算原始含油饱和度,可准确地识别出这种低电阻油气层,并可预测其产能.     

Hybrid strain based three node flat triangular shell elements—II. Numerical investigation of nonlinear problems

In a companion paper [M. L. Liu and C. W. S. To, Comput. Struct. 54, 1031–1056 (1995)] theories and incremental formulation of nonlinear shell structures discretized by the finite element method are discussed. The updated Lagrangian formulation and the incremental Hellinger-Reissner variational principle are adopted. The independently assumed fields employed are the incremental displacements and incremental strains. Based on the theory and incremental formulation explicit element stiffness and mass matrices of three node flat triangular shell finite elements are derived. In the present paper the derived element matrices are applied to nine examples. The latter include static and dynamic response analysis of shell structures with geometrical, material, and geometrical and material nonlinearities. The formulation adopted and element matrices derived are found to be accurate, flexible and applicable to various types of shell structures with geometrical and material nonlinearities.     

A sequencing problem for a mixed-model assembly line in a JIT production system

In an assembly line of a just-in-time (JIT) production system, workers have the power and the responsibility to stop the line when they fail to complete their operations within their work zones. This paper deals with a sequencing problem for the mixed-model assembly conveyor line in the JIT production system. In some environment, the most important criterion is the line stoppage rather than the variation of production rates. The problem is to find an optimal sequence of units that minimizes the total line stoppage time. Lower and upper bounds of the total line stoppage time are derived and the branch-and-bound method is applied to the problem. A numerical example is given.     

圆盘式高速金属冷锯机锯切功率的实验研究

对１６００圆盘式高速金属冷锯机进行了锯切功率的实验研究。对某厂四种有代表性的产品，用不同的进锯速度，实测每种条件下的锯切功率变化，和最大瞬时锯切功率与平均锯切功率之比。并以实测数据为基础，得出每种产品以进锯速度为自变量的平均锯切功率回归公式。这些工作，不仅可以为这种冷锯机锯切功率的理论研究提供依据，还可直接为使用和设计这种冷锯机给出具体参考数据。     

可调谐的双波长钛宝石激光器

一台可调谐钛宝石激光器两个波长同时运转,在数ns以内同步,相对波长差最大可达55nm。观测到明显的两种波长激光的竞争和关联。由BBO实现了两波的和频与倍频。     

温度,压力对漂移室气体增益的影响

研究了温度及气体压力对漂移室（工作于正比区）气体放大倍数的影响，温度和气体压力的变化范围分别是５￣４０℃及９０￣１０５ｋＰａ。用实验数据拟合得到了函数关系并测量了几种饱和度下函数中的参数值。     

建立河南油田“全天候”电网的探讨

按照建立“全天候”电网的要求,分析了油田电网大气过电压保护设计标准偏低,方案选型不合理;内部过电压保护不完善;线路及设备污闪严重;抗自然灾害能力差;以及通讯系统、运行管理、综合治理等方面的问题。提出了完善大气过电压保护;加强内部过电压保护等5项适应“全天候”电网的措施。     

气体动压轴承动态参数测定原理

将气体动压轴压简化为转化气膜系统后，针对其动力特点，给出气膜在微幅振动下动压轴承的实用数学模型和测定动态参数的方法，并进行了测量误差的修正。     

羧酸酯稀土对聚氯乙烯的热老化稳定作用研究

用热烘法研究了羧酸酯稀土对聚氯乙烯的热老化稳定作用。利用紫外／可见光谱分析跟踪共轭双键在热老化过程中的变化，比较ＣＥＲＥＳ，有机锡及两者的复合稳定剂的热老化稳定性能，发现ＣＥＲＥＳ与有机锡的稳定性能相当，复合稳定剂具有协同效应。