湍流大气中光波闪烁的计算及实验测量比较

采用修正Rytov方法和近似理论计算了球面波在湍流大气中传播的闪烁指数，并与实验结果进行了比较，发现在弱起伏和中等湍流起伏区修正Rytov解与实验结果符合得良好，而在饱和区采用考虑内尺度效应下的近似理论结果更符合实验结果。     

采用信息融合技术的IR／MMW复合导引头的目标跟踪

从误差测量环节入手，基于IR／MMW双模结构，采用信息融合处理技术提高其估计跟踪精度，最终达到降低制导误差，提高武器性能的目的，仿真结果验证了该方法的有效性。     

河北省张承地区风沙现状及治理对策

在分析张家口、承德地区风沙形成原因及发展趋势的基础上,提出了河北省防沙治沙工作中存在的问题,根据河北省不同类型区的自然、地理及社会经济条件,提出了风沙治理模式和建议。     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

数据挖掘技术在大坝安全决策支持系统中的应用

数据挖掘技术是一个新兴的，具有广阔应用前景和极富挑战性的研究领域。在充分研究大坝安全决策支持系统的基础上，结合数据挖掘技术的概念与方法等，对数据挖掘技术在大坝安全决策支持系统中的应用进行论述，与此同时，运用数据挖掘技术分析了某大坝垂直位移测值突变的物理成因。     

Serially-connected series-stub resonators for narrowband coplanar-stripline bandpass filters

In this letter, a coplanar stripline (CPS) series resonator composed of serially-connected series-stubs is proposed. This kind of resonator provides two transmission zeros close to the resonant frequency. With the proposed structure, the reactance slope parameters of the resonators are significantly increased and adjustable by changing the length ratio of the two series stubs. This is useful for designing narrowband filters which is difficult to realize with conventional series CPS resonators. The structures of the resonators are optimized for a lower radiation loss and used to design a narrowband Chebyshev bandpass filter. The simulation and experimental results show that the proposed filter provides multiple transmission zeros and high selectivity.     

影响喷气燃料与橡胶相容性的因素

采用几种具有不同初始物理性能及不同丙烯腈含量、不同硫化剂和硫化程度的丁腈橡胶，考察了其配方和物理性能对采用不同工艺条件生产的喷气燃料的相容性。结果表明，喷气燃料与橡胶的相容性不仅与喷气燃料的加工工艺有关，而且与橡胶的组成及其制备工艺有关。采用非加氢工艺生产的喷气燃料与橡胶的相容性好于采用加氢工艺(特别是加氢裂化工艺)生产的喷气燃料。橡胶材料的初始力学性能的好坏并不完全决定其与喷气燃料相容性的好坏，橡胶材料的耐过氧化物侵蚀能力才是影响相容性好坏的主要因素。橡胶的组成和其制备工艺决定了橡胶在喷气燃料中萃取物的数量和组成，不同萃取物的综合作用给相容性带来不同程度的影响。用硫作硫化剂的橡胶虽然原始强度低于用过氧化物作硫化剂的橡胶，但前者与喷气燃料的相容性却远好于后者。     

离心式冷水机组在线监控系统研究

阐述了离心式冷水机且在线监控系统的工作特点以及对监控的要求，说明了在线监控系统的基本配置，关键技术点和功能模块化的软硬件设计。     

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

The authors of this paper synthesized a series of amphiphilic triblock copolymers of polystyrene-b-poly(ethylene glycol)-b-polystyrene (PS-PEG-PS) having different PEG/PS ratios with nearly identical molecular weights of the entire copolymers. The interfacial interactions in the composites consisting of carbon black and the copolymers can thus be tailored. When these conducting composites are exposed to certain solvent vapors, their electrical resistances greatly increase, showing the gas sensitivity. The present work indicated that this switching behavior is controlled by the structural relaxation of the composites because matrix swelling acts as the main mechanism. The response time has been correlated with absolute temperature by Arrhenius equation, and the estimated activation energy reflects mobility of the fillers involved in the solvent induced expansion of the surrounding polymer. Therefore, by using the gas sensibility of the conductive composites, the structure evolution of the composite materials in solid state and the effect of filler/matrix interfacial interaction on the relaxation property of the matrix polymer has been inspected. It was found that lower activation energy represents stronger interfacial interaction in case good solvent of the matrix was used for the test.     

轧后穿水冷却工艺对棒材组织性能的影响

针对轧机产量提高后冷床冷却能力不足的问题 ,研制开发了棒材轧后穿水冷却技术。通过对小规格 2 0MnSiV热轧带肋钢筋进行轧后穿水冷却 ,钢材上冷床温度降低了 90～ 110℃ ,提高了产品质量 ,改善了各项力学性能 ,抗拉强度平均提高了 3 5～ 40MPa ,钢材性能合格率由 97.5 %提高到了 99.6% ,解决了冷床冷却能力不足、制约生产的瓶颈问题。