现代陶艺在环境空间中的应用

空间对于现代陶艺和环境建筑同样重要。陶艺空间和建筑空间因功能要求而定。现代陶艺以各种形式置身于环境空间之中,需要和它相适应的装饰语言。空间意识的改变,会产生一种全新的公共空间。增强人们对建筑与人文环境认识,将建筑的规模缩小为自然与人的空间。现代陶艺不仅构筑的是结构形体的空间,更表现的是一种博大的容纳品性。     

Polyimide foams with ultralow dielectric constants

To explore ultralow dielectric constant polyimide, the crosslinked polyimide foams (PIFs) were prepared from 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA), 4,4′‐oxydianiline (ODA), and 2,4,6‐triaminopyrimidine (TAP) via a poly(ester–amine salt) (PEAS) process. FTIR measurements indicated that TAP did not yield a negative effect on imidization of PEAS precursors. SEM measurement revealed the homogeneous cell structure. Through using TAP as a crosslinking monomer, the mechanical properties of PIFs could be improved in comparison with uncrosslinked BTDA/ODA based PIF. The crosslinked PIFs still exhibited excellent thermal stability with 5% weight loss temperatures higher than 520°C. In the field with frequency higher than 100 Hz, the dielectric constants of the obtained PIFs ranged from 1.77 to 2.4, and the dielectric losses were smaller than 3 × 10^?2 at 25–150°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1734–1740, 2006     

气固下行流化床反应器Ⅱ气固两相的流动规律

气固下行流化床反应器气固两相流动过程是比较复杂的，沿轴向气固两相运动可分为第一加速、第二加速和恒速３个运动段，沿径向局部气体速度、颗粒速度和颗粒浓度都具有不同程度的不均匀性。而这种不均匀性是由气固两相顺重力场湍动运动所决定的。和循环床提升管相比，下行管反应器气固两相沿径向分布的不均匀性得到有效地改善，气固可以实现超短接触操作，因而是一种新型高效气固超短接触反应器     

改性蛋白土填充线型低密度聚乙烯的研究

对超细加工并经硅烷偶联剂处理的蛋白土填充线型低密度聚乙烯进行了研究,结果表明:采用适当的偶联剂及恰当的添加量,改性蛋白土可以降低塑料的成本。     

基于信息流缺陷定位方法在软件测试中的应用

随着软件产业的飞速发展,人们对软件质量的要求也越来越高.现在,软件已经直接影响到了我们项目的成功和设备的安全.而软件中的复杂缺陷难以排除,因为它们涉及到许多程序要素之间的相互作用.论文扩展了基于信息流覆盖的缺陷定位技术.扩展后的技术融合了语句覆盖和分支覆盖技术,它还能定位复杂缺陷.试验结果表明,文中方法比基于语句覆盖、分支覆盖和定义使用对覆盖的方法要更可靠、更精确.     

Effect of Polyethylenimine on Hydrolysis and Dispersion Properties of Aqueous Si3N4 Suspensions

The roles of polyethylenimine (PEI) in the hydrolysis and dispersion properties of aqueous Si₃N₄ suspensions were studied in terms of the hydrolysis, adsorption, electrokinetic, and rheological measurements. It was found that the pH change of the suspensions in the acidic environment could be minimized in the presence of ≥0.5 dwb% PEI. The ammonia and oxygen measurements suggest that this phenomenon is primarily attributed to the buffer mechanism generated by the ionized PEI, instead of the protection mechanism. The constant pH enables the suspensions to retain a better stability with time at acidic pH. The adsorption of PEI on Si₃N₄ is a high-affinity type at highly basic pH, but is a low-affinity type at acidic pH. As the PEI amount increases, the adsorption shifts the isoelectric point (IEP) of Si₃N₄ from pH 5.9 to pH ∼11 until complete coverage is attained. The stability of Si₃N₄ suspensions is found to depend strongly on the saturated adsorption of PEI, which is as a function of the pH and PEI amount. Once the saturated adsorption limit is reached, the excess free PEI molecules become more detrimental to the stability with increased solid loading. The stabilization mechanisms of Si₃N₄ suspensions by PEI were discussed in detail.     

使用QTP对Silverlight应用进行自动化测试的研究与实践

Silverlight作为一个跨浏览器、跨平台的插件,将视频、交互性内容,以及其他应用完好的融合在一起,为用户提供了统一而丰富的体验。通过使用QTP把人为驱动的测试行为转换为机器执行的过程,实现对Silverlight应用的自动化测试。本文研究介绍了使用QTP对Silverlight应用进行自动化测试的方法,描述了具体的操作步骤以及解决方法。     

改性酚醛石墨胶泥的研制

介绍了改性酚醛石墨胶泥的研制过程。分析了胶泥各组成材料对胶泥性能的影响,经过试验确定了胶泥的组成成分——树脂、固化剂、填料等以及胶泥的配制工艺,并对其力学性能、耐腐蚀性能进行了测试分析,结果表明改性酚醛石墨胶泥具有良好的机械力学性能和耐腐蚀性能。     

PLC控制电梯教学模型的设计

根据电梯系统的结构特点及控制要求,设计了基于PLC控制的电梯教学模型。详细阐述了模型电梯系统的硬件构成和软件实现方法。试验表明,该实验装置提高了PLC实验课的教学质量。     

基于几何特征的流体动画控制方法

在流体动画中,流体控制是生成可控流体运动的关键技术.为产生视觉逼真、行为可控的流体动画效果,提出一种基于几何特征的流体控制方法.首先通过构建流体形状的时变几何分区,实现对可控流体形状的表达及动态跟踪;在此基础上设计异构控制模型,以增强流体运动控制的灵活性,该模型采用了带约束优化的刚性控制和基于弹簧模型的柔性控制2种方法;最后将异构控制模型与高精度流体物理模型相耦合,生成视觉逼真的可控流体运动效果.实验结果表明,该方法能够在保持流体角色形状的同时产生丰富的流体细节,满足动画师的设计需求.