含有腐植酸的吸水性树脂在溶液及土壤环境中的性质研究

考察了含有腐植酸的吸水性树脂(HA-MA-AM)在溶液以及土壤环境中的性质。当腐植酸钾用量低于40wt%时,在环境pH值为6～7的条件下,HA-MA-AM的吸水倍率明显高于未添加腐植酸钾的MA-AM型保水剂。实验结果表明,HA-MA-AM具有较好保持水分、抑制水分蒸发的作用。     

可完全生物降解材料的应用进展

介绍了可生物降解材料的降解机理和特点,综述了化学合成型、天然高分子型和微生物合成型可完全生物降解材料的研究现状及其在各个领域的最新应用进展。     

虚拟现实技术在化学实验教学中的应用研究

虚拟实验应用日益广泛,而支持虚拟实验的相关技术成为了研究热点。分析了虚拟化学实验及其在未来虚拟现实技术上的发展趋势,综述了U-nity3D技术、增强现实技术和Kinect体感交互技术的理论基础以及在虚拟化学实验中的应用与发展,以虚拟技术融合的方法为导向,仿真化学实验的实时环境,使虚拟实验简单化、直观化。展望了虚实融合技术在虚拟实验领域的应用前景。虚实融合技术有利于推动虚拟化学实验朝智能化发展,是虚拟实验改革的一个新起点。     

基于径向基神经网络的变压器故障诊断

研究了一种基于RBF神经网络的电力变压器故障诊断方法。该方法采用目前应用较多的隐含层为径向基函数的最小正交二乘法训练人工神经网络,克服了BP算法易陷入局部极小、收敛速度慢的缺点。利用MATLAB仿真实现,结果表明该方法具有速度快、诊断精度高等优点,能有效地运用于电力变压器故障诊断中。     

Synthesis,characterization, and thermal properties of alternate copolymers containing N,N′‐bis(diphenylsilyl)tetraphenylcyclodisilazane

Hexamethyldisilazane was used as the starting material to synthesize N,N′‐bis(hydroxydiphenylsilanyl)tetraphenylcyclodisilazane (BHPTPC). By condensation polymerization of BHPTPC with α,ω‐bis(dialkylamino)dimethylsiloxane, a series of alternate copolymers containing N,N′‐bis(diphenylsilyl)tetraphenylcyclodisilazane was synthesized. GPC studies show that the highest molecular weight was obtained at a ratio of 1.005 : 1 (BHPTPC: α,ω‐bis(dimethyl amino)dimethylsiloxane). Data of DSC indicate that the temperature of glass transition (T_g) and temperature of melting point (T_m) decreased with the increasing of dimethylsiloxane segments units. Three stages of degradation were found in the thermogravimetric analysis curves. The activation energy of the copolymer (with m = 2, 3, and 7) was calculated by using Flynn–Wall–Ozawa method. The activation energy of the copolymer with m = 2, 3, and 7 at second stage is 214, 211, and 184 kJ/mol, respectively. Isothermal gravimetric analysis shows that for the same temperature and the same time, the weight loss of the alternate copolymer was greatly less than that of common polydimethylsiloxane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 611–617, 2007     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

A formal framework for service mashups with dynamic service selection

The service mashup programming paradigm is a blooming faction of service oriented Architecture for developing web applications. A mashup application constructs its functionality by combining data, presentation and functionalities obtained from online services published by service providers such as Google and Amazon. This paradigm significantly facilitates the implementation of application and reduces the workload. But it also makes the application rely on the availability and qualities of the online services which beyond its control in which case the robustness of the system requires more concern. This paper proposes a formal model to specify and analyze the behavior and robustness of service mashups under a certain environment where some services may become unavailable. The specification contains both system specification and environment situation. Refinement theory are employed to specify the correctness of dynamic service selection. The framework realizes the service selection by allowing virtual service requests to be handled by any online service having consistent interface and refined functionality. The framework provides a clear definition of the robustness of mashup systems and proposes several rules as well as approaches to preserve the robustness during the development and maintenance of the system.     

Structural topology optimization with constraints on multi-fastener joint loads

This paper addresses an important problem of design constraints on fastener joint loads that are well recognized in the design of assembled aircraft structures. To avoid the failure of fastener joints, standard topology optimization is extended not only to minimize the structural compliance but also to control shear loads intensities over fasteners. It is shown that the underlying design scheme is to ameliorate the stiffness distribution over the structure in accordance with the control of load distributions over fastener joints. Typical examples are studied by means of topology optimization with joint load constraints and the standard compliance design. The effects of joint load constraints are highlighted by comparing numerical optimization results obtained by both methods. Meanwhile, resin models of optimized designs are fabricated by rapid prototyping process for loading test experiments to make sure the effectiveness of the proposed method.     

Research on the comprehensive traffic state evaluation model linked with drivers’ perception under the vehicle networking

Unified judgment standards and methods are often adopted to identify traffic state in certain road network based on traffic flow parameters. However, drivers often have different perceptions about the traffic state on different road sections, since their expectations on traffic state vary more or less from each other on different road sections. In particular, under the vehicle networking, out of considerations for safety and other relevant factors, requirements for the correlation and coordination of running vehicles have also raised significantly. Therefore, it is necessary to take driver’s perception about the driving conditions of certain road sections into consideration to adjust the release of traffic state. This paper has provided a comprehensive traffic state evaluation model linked with driver’s perception under the vehicle networking. The authors first establish an ANFIS model based on the T–S model and then conduct statistical analysis on drivers’ perceptions about certain traffic state. At last, the authors use the results of statistical analysis as regulatory factors to amend the parameters input through ANFIS. Through simulation, this paper has demonstrated that the model established has a high rate of convergence, a high identification precision and the generalization ability to conduct researches on the identification of traffic state.     

基于贪婪路由协议的动态单/多链路故障恢复策略

针对现有的贪婪方法不能有效处理拓扑结构中链路故障的问题,提出单链路故障和多链路故障本地化恢复策略。首先,通过利用克莱因伯格的贪婪嵌入给出单链路故障恢复策略;然后,将其扩展到多链路故障的情况;最后,在基于Python/C++的仿真环境下对提出的技术进行评估。实验结果表明,该技术仅需要非常有限的资源,且造成的路由质量损耗也有限,可以实现快速切换,可依网络生成树中链路数目扩展。该技术的可扩展性、简单性和低开销使其适合于大型网络。