浅谈SN388采集站维修

SN388采集站器件的高度集成化给维修工作带来了一定的困难,本文列举了SN388采集站及其测试设备的一些常见故障,并介绍了使用测试设备TMS388排除相应故障的方法。     

Formation of hierarchical Si3N4 foams by protein-based gelcasting and chemical vapor infiltration

Silicon nitride foams with a hierarchical porous structure was formed by the combination of protein-based gelcasting,chemical vapor infiltration,and in-situ growth of silicon nitride nanowires.The porosity of the foams can be controlled at 76.3-83.8 vol%with an open porosity of 70.2—82.8 vol%.The pore size distribution was presented in three levels:<2μm(voids among grains and cross overlapping of silicon nitride nanowires(SNNWs)),10—50μm(cell windows),and>100μm(cells).The resulted compressive strength of the porous bodies at room temperature can achieve up to 18.0±1.0 MPa(porosity=76.3 vol%)while the corresponding retention rate at 800℃was 58.3%.Gas permeability value was measured to be 5.16(cm³·cm)/(cm²·s·kPa).The good strength,high permeability together with the pore structure in multiple scales enabled the foam materials for microparticle infiltration applications.     

仪器安装板振动环境虚拟试验和验证技术研究

基于商用有限元软件MSC.Patran和Nastran,研究了导弹仪器安装板结构的振动环境预示技术。建立了仪器安装板的三维实体模型,单机仪器使用质点模拟,并通过MPC法与安装板连接;设置了多种阻尼特性,通过模态叠加法预示了该仪器安装板在振动条件下的结构动力学环境,通过振动试验验证了预示结果。研究发现,使用大阻尼能较好地预示该仪器安装板结构的动力学环境。     

半柔性路面材料微波加热振动轮碾机装置

水泥乳化沥青混合料作为一种常用的半柔性路面材料,可在常温条件下拌和,摊铺与碾压,施工不需要大型装备,易于实现一体化施工,并且具有低能耗,低污染的特点。振动轮碾装置可以很大程度模拟现场压路机施工工况,可以有效指导现场施工质量。但目前多数施工单位仍然参照热沥青材料或乳化沥青冷再生材料的方法和施工技术。促使该类水泥乳化沥青混合料路面在压实和施工中存在很大的问题,导致路面质量不佳,严重影响了该混合料路面的大面积推广和应用。针对此,设计了一种振动轮碾装置成型机整体,并对关键部件进行选型指导及其校核计算。该成型机由机架、小车装置、振动装置、刮平装置以及试模及其微波装置构成。     

Boron Nanosheet?Supported Rh Catalysts for Hydrogen Evolution: A New Territory for the Strong Metal?Support Interaction Effect

High-efficiency electrochemical hydrogen evolution reaction (HER) offers a promising strategy to address energy and environmental crisis. Platinum is the most e...     

Mantle dynamics of the reactivating North China Craton:Constraints from the topographies of the 410-km and 660-km discontinuities

The topographies of the 410-km and 660-km discontinuities have important implications for mantle dynamics.Here we present high-resolution seismic imaging of the 410-km and 660-km discontinuities beneath the North China Craton (NCC) employing the receiver function method.Depth anomalies (deeper or shallower than the global average depths) at both discontinuities were detected by introducing a three-dimensional regional velocity model.The depressions of the 410-km discontinuity are mostly located in the easte...     

Detoxification of Zearalenone by viable and inactivated cells of Planococcus sp

The capacity of Planococcus sp. strain S118 to remove Zearalenone (ZEN) from liquid medium in varying conditions was investigated. The results indicated that Planococcus sp. S118 removed ZEN by binding process. Strain S118 significantly reduced the levels of ZEN in the liquid medium; the viable and heat-inactivated bacteria could remove 21.82% and 47.82% of ZEN, respectively. Heat, acid, and Triton-100 treatment significantly enhanced the capability of removing ZEN. The detoxifying capability depended on the incubation period, concentration of bacteria, pH, and temperature. Planococcus sp. S118 likewise possessed the capability to remove Zearalanone (ZAN), which is one of ZEN analogues. The viable and heat-inactivated bacteria could remove 16.36% and 34.26% of ZAN, respectively. The detoxifying capability of ZEN and ZAN by heat-inactivated bacteria were significantly influenced by each other.     

金属切削液在轴承加工中的应用

着重介绍金属切削液的分类、功能及其在轴承加工中的选用。在轴承加工中,一般有车削、铣削、钻削、铰削和磨削等多种加工工艺,其中磨削加工是一道非常重要的精密加工工序,如内圆磨削、外圆磨削、平面磨削和沟槽磨削等。轴承加工中使用的水基切削液不仅要具有冷却作用,还要有润滑、清洗和防锈的功能。重点介绍金属切削液的主要功能及其在轴承加工中的应用。     

Life Prediction Based on Transient Dynamics Analysis of Van Semi-trailer with Air Suspension System

The early fatigue damage in the van-body of the semi-trailer is often caused by the unique mechanical characteristics and the dynamic impact of the loads.The traditional finite element method with static strength analysis cannot support the fatigue design of van-body;thus,the dynamics analysis should be adopted for the endurance performance.The accurate dynamics model to describe the transient impacts of all kinds of uneven road and the proper system transfer functions to calculate the load transfer effects...     

W-based versus latent variables spatial autoregressive models: evidence from Monte Carlo simulations

In this paper, we compare by means of Monte Carlo simulations two approaches to take spatial autocorrelation into account: the classical spatial autoregressive model and the structural equations model with latent variables. The former accounts for spatial dependence and spillover effects in georeferenced data by means of a spatial weights matrix W. The latter represents spatial dependence and spillover effects by means of a latent variable in the structural (regression) model while the observed spatially lagged variables are related to the latent spatial dependence variable in the measurement model. The simulation results based on Anselin’s Columbus, Ohio, crime data set show that the misspecified latent variables approach slightly trails the correctly specified classical approach in terms of bias and root mean squared error of the coefficient estimators.