Simultaneous mass and heat transfer under mixed convection along a vertical cone

Steady laminar binary mixed convection flow along a vertical circular cone under the combined buoyancy effects of thermal and species diffusion is studied analytically. The analysis is confined to mass diffusion processes with low concentration levels. In the analysis the surface of the cone is assumed to be at a uniform temperature and uniform concentration. Numerical results for the local Sherwood number, local Nusselt number and local friction factor are presented. Representative temperature, concentration and velocity profiles are also shown. The analysis covers the diffusion of common gases and vapours into air. Considerations are given to the situations where the buoyancy forces assist and oppose the forced convection flow for various possible combinations of the thermal and species diffusion processes.     

Moisture Distribution and Dewatering Efficiency for Wet Materials

This review paper summarizes current research efforts toward a comprehensive view of wet material dewatering, considering the binding energy as the strength to hold water, and rupture energy given to remove moisture from materials.     

Effect of the Inside Placement of Electrically Conductive Beads on Electric Field Uniformity in a Microwave Applicator

Non-uniform heating is a major issue in microwave applications, mainly due to inherently uneven distribution of electromagnetic energy in the microwave applicator. In this work, our aim is to improve electric field distribution uniformity by utilizing microwave reflection from electrically conductive beads placed in the microwave oven. The effects of position, size, and number of electrically conductive beads on the electric field distribution were numerically investigated, and validated through water-load experiments in the cavity. It is found that uniform electric field distribution was realized to some extent by appropriate placement of electrically conductive beads; meanwhile, average electric field intensity in the microwave oven was increased.     

Spouting of two-dimensional beds with draft plates

Two slotted two-dimensional spouted bed units with flexible bed dimensions were used with draft plates to study spouting pressure drop and minimum spouting superficial velocity. The data were collected while varying slant angle, spout width, separation distance, length of bed, height of bed, and size of bed (geometrical similarity) using shelled corn, soybean, and wheat. The variables which affect the spouting pressure drop and air flow through the beds are discussed. Empirical correlations are developed following the principles of dimensional analysis and similitude. The developed correlations agree closely with the collected data.     

Microwave freeze drying of sea cucumber (Stichopus japonicus)

Freeze drying (FD) yields the best quality of dried sea cucumber but at the cost of long drying time and also the overall cost. Air drying (AD) gives an unacceptably poor quality product. To achieve faster drying along with a high quality product a microwave freeze drying (MFD) technique was developed to dry sea cucumbers. The relationship between corona discharge and microwave power at various pressures and initial moisture content conditions was studied to avoid the possibility of corona discharge during MFD. According to the drying characteristics of MFD, a control strategy for the MFD process was also developed. MFD reduced the drying time by about half of conventional FD process and provided a similar good product quality.     

Production and evaluation of vildagliptin-loaded poly(dl-lactide) and poly(dl-lactide-glycolide) micro-/nanoparticles: Response surface methodology approach

A laboratory scale spray dryer was used to encapsulate vildagliptin (VLG), an antihyperglycemic drug, into different polymers such as poly(dl-lactide) (PDLA), poly(dl-lactide-glycolide)-50:50 (PLGA 50:50), and poly(dl-lactide-glycolide)-75:25 (PLGA 75:25). Response surface methodology (RSM) was employed to evaluate the effects of process and formulation factors on the encapsulation efficiency (EE). The physicochemical properties of the drug-loaded micro-/nanoparticles, mainly the drug loading (DL), particle size distribution, surface morphology, drug–polymer compatibility, and release rate were investigated. % EE of drug-loaded micro-/nanoparticles were in the range of 57.10% to 76.44%. PLGA50:50 micro-/nanoparticles showed highest EE as compared to PDLA and PLGA75:25 micro-/nanoparticles. The mean particle size of the micro-/nanoparticles containing PLGA 50:50, PLGA 75:25, and PDLA polymers were 428?nm, 640?nm, and 1.22 µm, respectively. Surface morphology study revealed smooth, spherical and nonporous surface structures of the micro-/nanoparticles. Fourier transform infrared spectroscopy studies confirmed the drug–polymer compatibility. Powder X-ray diffraction analysis of micro-/nanoparticles revealed that VLG was present in the amorphous form within the micro-/nanoparticles formulations. In vitro release study demonstrated that VLG is slowly released from micro-/nanoparticles for 12?h and the drug release rate was influenced by type and viscosity of polymers used. This work suggests that PDLA, PLGA 50:50, and PLGA75:25 polymers are able to sustain the VLG release rates from micro-/nanoparticles.     

A Parametric Study of the Gas Flow Patterns and Drying Performance of Co-current Spray Dryer: Results of a Computational Fluid Dynamics Study

A computational fluid dynamic study was carried out to investigate airflow pattern, temperature, and humidity profile at different levels in the drying chamber. Good agreement was obtained with published experimental data. The effects of operating pressure, heat loss from the chamber wall and inlet air conditions on the gas flow pattern, droplet trajectories, and overall dryer performance also were investigated. Results are presented and discussed in terms of the gas velocity, temperature, and humidity profiles within the chambers. The volumetric evaporation values, heat transfer intensity, and thermal energy consumption per unit evaporation rate were computed and compared for drying of a 42.5% solids solution in a spray chamber 2.215 m in diameter with a cylindrical top section 2.005 m high and a bottom cone 1.725 m high. Wall regions subject to formation of undesirable deposits are also identified.