Floor heave in the west wing track haulage roadway of the Tingnan Coal Mine: Mechanism and control

Floor heave of a roadway is a dynamic phenomenon that often happens in the roadways of coal mines. It seriously affects safe production in the coal mine. Floor heave has long been one of the most difficult problems to be resolved during coal mining. An analysis of floor heave in the soft rock surrounding the roadway, and the factors influencing it, allowed the deformation mechanism in the west wing double track haulage roadway of the Tingnan Coal Mine to be deduced. Three types of floor heave are observed there: intumescent floor heave, extrusion and mobility floor heave, and compound floor heave. Control measures are proposed that have been adopted during a recent repair engineering project. Control of the floor heave in the west wing track haulage roadway was demonstrated. The reliability and rationality of a combined support technology including floor anchors, an inverted arch, and anchoring of both sides was verified by mine pressure data and the field observations. Waterproofing measures were also undertaken to assist in the control of floor heave.     

在线自学与考试系统的设计

本文将现有的在线自学与在线考试系统相结合,设计出一个具备教学与测试的完整的学习系统,并实现学习者学习进度记录、进度相互比较及经验交流等功能,使学习者在学习过程中并不孤独。     

高浓度制药废水处理工程实例

针对某制药公司废水主要成分为DMF、三乙胺、四氢呋喃等,新建1座废水处理厂,采用化学氧化—兼氧—好氧—接触氧化处理工艺.该类制药废水含盐量较高,需经稀释后再进行生化处理,经生化处理后二沉池出水可达《污水综合排放标准》(GB 8978-1996)二级标准.处理工艺恶臭气体采用收集—预处理—低温等离子处理—后处理—高空排放工艺进行处理,处理后可达《恶臭污染物排放标准》(GB 14554-93)二级排放标准.     

平面五杆柔顺并联机构的多稳态特征分析

以平面五杆柔顺并联机构为研究对象,从机构位形的对称性出发寻找机构的稳态特性.针对五杆机构存在两个柔顺关节的情况进行分析,研究其多稳态特征.将五杆机构简化成伪刚体模型,通过势能和图形的几何关系,推导出角度的对称关系.在五杆机构的分析过程中,发现并利用图形的对称性,来寻找稳态位置.证明了当两个柔顺关节中有一个为驱动关节时,机构可以通过对称角或对称位形来找稳态位置,并寻找到一种平面五杆三稳态机构.     

Effect of dy on structure and magnetic properties of CoPt alloys

The effects of Dy on the microstructure and magnetic properties of Dy _x Co_50?x Pt₅₀ alloys were investigated. The XRD results indicate that all the alloys homogenized at 1000 °C contain only a single A1 (fcc) phase, while the alloys annealed at 675 °C consist of a hard-magnetic face-centered-tetragonal (fct) phase and a magnetically soft face-centered-cube (fcc) phase. Maximum values for the coercivity H _c and remanence ratio m _r were achieved in Dy_0.4Co_49.6Pt₅₀ alloys annealed at 675 °C for 80 min. For the series of Dy _x Co_50?x Pt₅₀ alloys annealed at 675 °C for 60 min, H _c decreases monotonically with increasing Dy concentration, but m _r is first enhanced and then weakened.     

树叶状Co和Co3O4的水热合成与磁性研究

以氯化钴（CoCl2·6H2O）和氢氧化钠作为反应前驱物,采用水热法合成微米级树叶状钴单质,在500℃退火条件下得到形貌相似的Co3O4粒子,并运用XRD、SEM和VSM对所得粒子的结构、形貌和磁性能进行了初步研究。结果表明,树叶状钴单质表现出室温铁磁行为,具有较高的磁参数,其中饱和磁化强度为139．3emu／g、矫顽力为29．5kA／m。同时发现,在500℃×1h退火后的CosOa还出现极弱的铁磁性行为,可能是未完全氧化的Co单质所产生。     

Effect of fiber orientation on the structural behavior of FRP wrapped concrete cylinders

In this study, 27 concrete cylinders with a diameter of 152.4 and a height of 304.8 mm were prepared. Among them, 18 cylinders were wrapped using two layers of fiber reinforced polymer (FRP) with six fiber orientations; six cylinders were wrapped using four layers of FRP with fibers in axial or hoop direction only; the remaining three cylinders were used as control. The FRP used was E-glass fiber reinforced ultraviolet (UV) curing vinyl ester. Fifteen coupon specimens were prepared to experimentally determine the tensile strength of the FRP with fibers oriented at 0°, 45°, and 90° from the loading direction. Co-axial compression tests were conducted on the wrapped cylinders and control cylinders. The test results were compared with existing confinement models. It is found that the strength, ductility, and failure mode of FRP wrapped concrete cylinders depend on the fiber orientation and wall thickness. Fibers oriented at a certain angle in between the hoop direction and axial direction may result in strength lower than fibers along hoop or axial direction. A larger database is desired in order to refine the existing design-oriented confinement models.     

Modeling and simulation for a drop-impact analysis of multi-layered printed circuit boards

Multi-layered printed circuit boards (PCBs) contain a multi-layered structure that is suitable for high-speed and high-frequency applications. Hence, they are used extensively in electronic packaging assemblies for high-density applications. However, numerous composite parts and complex material properties of multi-layer PCBs complicate the reliability simulation of PCB model. This paper deals with a finite element analysis intended to describe numerically the behavior of multi-layered multi-materials PCB model (combination of metallic and composite plies) in the drop-impact performance. Through the comparison of physical drop test results, the fully multi-layered model illustrates higher accuracy if compared with that of the traditional simplified isotropic model and orthotropic model. The effects of material properties for the multi-layer PCB under drop-impact shock have also been investigated.     

Voice over wireless local area network

This paper introduces the special issue on voice over wireless local area networks (VoWLAN), which aim to foster interaction among researchers from both academia and industry in networking, wireless communications, and mobile computing. The special issue includes an article investigating the issue of determining an appropriate pricing strategy for VoWLAN provisioning. Also featured are two articles on polling as a solution for supporting real-time traffic over WLANs and another on media optimization network architecture (MONA).     

基于ARM的SkyEye仿真研究

介绍指令级模拟器SkyEye及安装、文件配置、硬件模拟逻辑结构.