科学认识河湖水系连通问题

近年,河湖水系连通问题受到了极大关注,各级水行政主管部门对河湖水系连通的理论问题提出了迫切需求。结合国内外河湖水系连通的实例以及不同专家的意见和建议,对河湖水系连通的相关问题进行了初步梳理和总结,提出了当前推进河湖水系连通工作应注意的几个问题。     

ERP软件管理技术在我国的应用分析

随着科技的高速发展,现代化的建设中不可缺少的运用多种管理软件,ERP作为一种新型的企业管理模式系统,是信息时代的高级管理方式,在企业的各项管理运作中优化组合,提高了管理能力.本文就EKP软件在我国的应用进行了简单的分析.     

Experimental dynamic characterizations and modelling of disk vibrations for HDDs

Currently, the rotational speed of spindle motors in HDDs (Hard-Disk Drives) are increasing to improve high data throughput and decrease rotational latency for ultra-high data transfer rates. However, the disk platters are excited to vibrate at their natural frequencies due to higher air-flow excitation as well as eccentricities and imbalances in the disk-spindle assembly. These factors contribute directly to TMR (Track Mis-Registration) which limits achievable high recording density essential for future mobile HDDs. In this paper, the natural mode shapes of an annular disk mounted on a spindle motor used in current HDDs are characterized using FEM (Finite Element Methods) analysis and verified with SLDV (Scanning Laser Doppler Vibrometer) measurements. The identified vibration frequencies and amplitudes of the disk ODS (Operating Deflection Shapes) at corresponding disk mode shapes are modelled as repeatable disturbance components for servo compensation in HDDs. Our experimental results show that the SLDV measurements are accurate in capturing static disk mode shapes without the need for intricate air-flow aero-elastic models, and the proposed disk ODS vibration model correlates well with experimental measurements from a LDV.     

公信力，媒体只有这一条命

这是一个被人誉为资讯爆炸的时代,这是一个他信力接近冰点的时代……生活在信息时代的人们,每天都接收到众多资讯,这些资讯涵盖大众生活的各个方面,商业、政治、体育、生活等。而大大小小的媒体每天将最新的新闻与资讯传达给大众时,也夹杂着它们对于新闻事件的观点和态度。     

Room-temperature tests of an optical transducer for resonant gravitational wave detectors

A two-oscillator transducer incorporating a laser-illuminated Fabry-Perot cavity with a finesse of 77,500 and a power dissipation of 1.2 μW was tested at room temperature. The energy of the last resonator with a mass of 1.25 g was measured to be k(B)T within 8%, and no back action from the sensor could be detected. The lowest value of the noise measured away from resonance was 1.0 × 10(-15)m/√Hz, and the electronic noise was 3.2 × 10(-17) m/√Hz. That transducer is designed for a 2400-kg gravitational wave antenna operating at cryogenic temperatures. At 4.2 K and for mechanical quality factors of 3 × 10(6), the measured thermal and electronic noise levels would translate into a sensitivity in h equal to 7.0 × 10 (-19) and 1.5 × 10(-19), respectively.     

Self-Mineralizing Dnazyme Hydrogel as a Multifaceted Bone Microenvironment Amendment for Promoting Osteogenesis in Osteoporosis

The accumulation of reactive oxygen species (ROS) and minimal osteogenic raw material in the osteoporotic bone microenvironment greatly inhibits the activity of osteoblasts. Herein, it is originally proposed to construct a biomatrix multifaceted bone microenvironment amendment -Mineralized zippered G4-Hemin DNAzyme hydrogel (MDH)-to improve osteoporotic osteogenic capacity and promote high-quality bone defect repair. The programmed design of the rolling circle amplified DNA hydrogel synthesis system allows the introduction of massive amounts of zippered G4-Hemin DNAzyme in MDH. The zippered G4-Hemin DNAzyme highly mimics the tight catalytic configuration of horseradish peroxidase and exerts excellent enzyme-like activity with considerable ROS molecule scavenging ability. In addition, the DNA amplification by-product pyrophosphate is ingeniously employed as a sufficient phosphorus source, thus constituting an autonomous mineralization system for waste reuse through the introduction of pyrophosphate hydrolase and calcium ions, which deposits in MDH as an osteogenic raw material and addresses the challenge of DNA hydrogel bio-application stability. The remarkable in vitro and in vivo outcomes demonstrate that MDH can effectively improve the oxidative stress status of osteoblasts, restore the balance of mitochondrial membrane potential, and reduce apoptosis, ultimately demonstrating superior osteogenic capacity.     

计及三相短路故障的MMC光伏并网系统电压补偿方法

模块化多电平变流器(mudular multilevel converter,MMC)在主电路结构中可以有效提高光伏并网系统的光能利用率。提出了一种光伏电站直流并网方案,通过大功率高变比的有源箝位Boost全桥隔离变换器串联升压,然后经MMC实现光伏高压直流并网。针对光伏并网后交流侧电压的稳定性,提出了基于电压前馈的双闭环控制策略。在MATLAB/Simulink中搭建串联型光伏电站经MMC并网模型,并应用基于电压前馈的双闭环控制策略,验证所提拓扑方案的正确性以及控制策略的可行性。结果表明,控制策略可以在发生三相短路故障时及时补偿电压,提高交流系统侧的可靠性。     

Tensile Strength Evolution and Damage Mechanisms of Al–Si Piston Alloy at Different Temperatures

The Al–Si piston alloys always bear different temperatures because of its peculiar component structure and service condition. Therefore, the tensile strength, elongation to fracture, and corresponding damage mechanisms of Al12SiCuNiMg piston alloys (ASPA) have been investigated with in situ technique at different temperatures. The tensile properties show two‐stage tendencies: the former stage (25–280 °C) is determined by easily broken phases with inherent brittleness (such as primary Si), and the fracture behavior presents rapid brittle fracture after reaching the critical stress (about 430 MPa, based on in situ technique and the elastic stress field model). The later one (280–425 °C) is dominated by particles debonding and θphase coarsening. The plastic deformation behavior, dynamic recovery, and flow process become more significant on account of thermal activation. The Considère criterion h = K indicates that the transition of damage behaviors from insufficient local strength to insufficient matrix strength and the corresponding failure model shifts from brittle to ductile fracture. Based on the damage mechanisms, the elastic field model and thermal activation relation model have been established to characterize the strength of the ASPA at different temperature ranges.

     

In Situ Chelating Synthesis of Hierarchical LiNi1/3Co1/3Mn1/3O2 Polyhedron Assemblies with Ultralong Cycle Life for Li‐Ion Batteries

Layered lithium transition‐metal oxides, with large capacity and high discharge platform, are promising cathode materials for Li‐ion batteries. However, their high‐rate cycling stability still remains a large challenge. Herein, hierarchical LiNi_1/3Co_1/3Mn_1/3O₂ polyhedron assemblies are obtained through in situ chelation of transition metal ions (Ni²⁺, Co²⁺, and Mn²⁺) with amide groups uniformly distributed along the backbone of modified polyacrylonitrile chains to achieve intimate mixing at the atomic level. The assemblies exhibit outstanding electrochemical performances: superior rate capability, high volumetric energy density, and especially ultralong high‐rate cyclability, due to the superiority of unique hierarchical structures. The polyhedrons with exposed active crystal facets provide more channels for Li⁺ diffusion, and meso/macropores serve as access shortcuts for fast migration of electrolytes, Li⁺ and electrons. The strategy proposed in this work can be extended to fabricate other mixed transition metal‐based materials for advanced batteries.