唐钢薄板坯连铸连轧生产中半无头轧制技术分析

介绍了热轧薄带钢生产中半无头轧制的优点，并对唐钢薄板坯连铸连轧生产中半无头轧制的工艺方案和关键技术进行了技术分析。     

CO毒化AB5型合金分形特征研究

研究了三种贮氢合金 L a Ni5、L a Ni4 .7Al0 .3、Ml Ni4 .5Al0 .5被 10 0× 10 - 6 CO毒化后的分形特征 ,求出这三种合金在含 10 0× 10 - 6 CO的氢中循环 ,分维分别为 0 .2 5 4 7、0 .170 9、0 .0 72 5。可以较好的解释合金被毒化的宏观现象。     

乙烯裂解炉对流段局部结构设计改进

介绍了乙烯裂解炉对流段的结构功能,各部件局部结构的改善设计。     

使用IP/NetBEUI组合协议建造跨VLAN的VoD网站的方法

介绍一种使用IP和NetBEUI组合协议建造Intranet内部VoD（视频点播）网站的简 便技术。并已成功地运用这一技术建成了莆田学院的VoD网站。     

钾基CO2吸收剂的碳酸化反应特性

对钾基CO2吸收剂的碳酸化反应机理进行研究.利用热重分析、XRD、扫描电镜和氮吸附仪进行试验.结果表明:分析纯碳酸钾的组分为K2CO3·1.5H2O,碳酸化反应速率缓慢;先将分析纯碳酸钾样品脱除结晶水后再进行碳酸化反应时,K2CO3与气氛中的水蒸气迅速生成K2CO3·1.5H2O,不利于碳酸化反应的进行;由KHCO3分解产生的K2CO3却表现出优越的碳酸化反应性能,20 min内转化率高达85%以上,经过多次循环试验后吸收剂仍保持很高的活性.从微观角度分析了两种改性钾基CO2吸收剂碳酸化反应机理差异的原因,通过拟合计算得到了这3种钾基吸收剂的碳酸化反应速率常数,为干法K2CO3/KHCO3循环脱除CO2的研究提供了一定的基础数据.     

A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.