PET的紫外老化性能及机理研究

采用力学、紫外-可见光分析和热失质等测试手段研究了PET改性料的紫外老化性能及老化机理。结果表明:复合助剂的加入能显著提升体系的力学性能保持率,进而提升其紫外老化寿命,提升的幅度随复合助剂中耐紫外剂含量的增加而显著增加。DSC分析表明,随着复合助剂的引入和老化的进行,改性料结晶度增加。文中进一步讨论了PET改性料的紫外老化机理。紫外-可见光分析表明,紫外老化能产生醌类和双醌类物质,进而提升PET改性料的紫外吸收度。     

Single-Crystalline TiO2(B) Nanobelts with Unusual Large Exposed {100} Facets and Enhanced Li-Storage Capacity

The {100} facet of single-crystalline TiO₂(B) is an ideal platform for inserting Li ions, but it is hard to be obtained due to its high surface energy. Here, the single-crystalline TiO₂(B) nanobelts from H₂Ti₃O₇ with nearly 70% {100} facets exposed are synthesized, which significantly enhances Li-storage capacity. The first-principle calculations demonstrate an ab in-plane 2D diffusion through the exposed {100} facets. As a consequence, the nanobelts can significantly accommodate Li ions in LiTiO₂ formula with specific capacity up to 335 mAh g⁻¹, which is in good agreement with the electrochemical characterizations. Coating with conductive and protective poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), the cut-off discharge voltage is as low as 0.5 V, leading to a capacity of 160.7 mAh g⁻¹ after 1500 cycles with a retention rate of 66% at 1C. This work provides a practical strategy to increase the Li-ion capacity and cycle stability by tailoring the crystal orientation and nanostructures.     

含煤盆地深层“超饱和”煤层气形成条件

中国深层煤层气资源丰富，但总体勘探和认识程度较低，尚未形成较为系统的深层煤层气地质理论。通过解剖分析准噶尔盆地白家海凸起和鄂尔多斯盆地临兴区块深层"超饱和"煤层气井的试气/生产动态，估算原地游离气的含气量，分析了深层"超饱和"煤层气的形成条件。研究表明：①深层"超饱和"煤层气储层中除吸附气外，还含有原地游离气，用常规试气方法可直接获得气流，煤层气的产出不明显依赖于排水降压；②埋藏超过一定深度，在煤阶和温度的综合作用下，煤的吸附能力将随埋深的继续增加而降低，煤层中吸附气的饱和度有增加的趋势，在达到吸附饱和后，出现原地游离气并形成"超饱和"煤层气，盆地深层具有"超饱和"煤层气形成的优势条件；③由于地温梯度和压力梯度的不同，不同盆地"超饱和"煤层气出现的临界深度不同，异常高压和异常高热流可以降低深层"超饱和"煤层气形成的临界深度；④深层"超饱和"煤层气开发具有大大缩短见气时间、充分利用地层能量和累积产水量低等优势，有望成为未来煤层气勘探开发的一个重要领域。     

Cross-Layer Optimization of Dynamic Packet Assignment for Video Transmission Over IEEE 802.11e Networks

Video transmission over IEEE 802.11e wireless networks still shows poor performance for large bandwidth demand and frequently changed environments. Thus, several enhancements of IEEE 802.11e were proposed. On the other hand, big frames and simultaneous sending of adjacent frames always cause packet dropping for buffer overflow. In the past, we proposed an IEEE 802.11e enhancement named DFAA and a content aware mechanism to solve the above problems. The motivation of this paper is to find a proper way to integrate these two mechanisms. A DFAA enhancement (DFAA-E) is proposed to make up the insufficiency of content aware mechanism. Experiments results show that the combination of DFAA-E and content aware mechanism improves the video decoded quality greatly. And its performance can be further enhanced by selecting the suitable settings of certain parameters.     

超高效液相色谱—串联质谱法快速同时检测茶叶中7种香料

基于超高效液相色谱—串联质谱(UHPLC-MS/MS),建立了同时检测茶叶中7种可能非法添加的香料(茴香烯、香豆素、胡椒酚甲醚、指甲花醌、甲基丁香酚、蒲勒酮和反式肉桂醛)的定性、定量方法。茶叶样品经过乙腈—水混合溶剂提取,涡旋振荡,适当稀释并加入无水硫酸钠、十八烷基键合硅胶(C₁₈)和N-丙基乙二胺(PSA)进行净化,涡旋离心后,上清液过膜待测。以Kinetex C₁₈色谱柱分离,在多反应检测扫描(MRM)模式下经MS/MS进行基质外标法定量检测。试验结果表明,7种目标物在0.8~1 600.0 μg/L范围内呈良好线性,线性相关系数(R2)均大于0.999。方法的检出限为0.02~0.03 mg/kg,定量限为0.05~0.10 mg/kg,平均回收率为82.5%~102.5%,日内、日间精密度分别小于16%和18%。该方法快速、可靠、灵敏度高,用于检测市面流通的100个茶叶样品,结果检出了反式茴香脑、香豆素和胡椒酚甲醚等物质,最大浓度值分别为65.0,2.0,72.2 mg/kg。     

K4,4,p的点可区别的IE-全染色(p≥1008)

该文利用色集事先分配法、构造染色法、反证法探讨了完全三部图K_4,4,p (p≥1008)的点可区别IE-全染色问题，确定了K_4,4,p (p≥1008)的点可区别IE-全染色数。     

基于ANP-SWOT的上海公路废弃物资源化发展对策研究

随着公路系统的新陈代谢，大量废弃物给城市的资源与环境协调发展带来了巨大压力，以沥青路面再生技术为路径的公路废弃物资源化符合循环经济的理念，是我国公路建设迈向生态文明的必然选择。通过 ANP-SWOT 对上海公路废弃物资源化发展战略进行实证分析，发现当前形势下其优势和机遇较为明显，确定以 SO 策略为核心的推广战略为最佳选择，并提出一系列配套发展策略，为推动上海公路废弃物资源化提供参考。     

0Cr20Mn21Ni2N奥氏体不锈钢锻件组织性能研究

研究了无磁钻铤用0Cr20Mn21Ni2N奥氏体不锈钢圆棒锻件横截面的室温强度、硬度和韧性等力学性能,并从微观角度进行了分析。在圆棒表层区域观察到了锻造变形态晶粒组织,而直径四分之一区域为再结晶组织,平均晶粒尺寸为80μm,芯部再结晶晶粒尺寸粗化为150μm,这些差异是由不同的变形温度和降温速度造成的。这种组织差异导致的室温拉伸性能和冲击韧性也有相应的变化趋势。研究结果表明,在900、1000℃以0.5 s-1的应变速率压缩的0Cr20Mn21Ni2N试验钢样品,其应力应变曲线具有一定的加工硬化特征,其芯部硬度比应变速率为0.1 s-1的样品分别提升了28、15 HB。在700、800℃以20%以上的变形量进行压缩时,峰值抗力显著提高,而在900、1000℃以10%~50%的变形量进行压缩时,峰值抗力均无明显提高,可保证顺利的变形过程。     

Personality expression and recognition in Chinese language usage

User Modeling and User-Adapted Interaction - Personality plays a pivotal role at work. Many scholars have investigated the association between personality and language usage habits in the English...     

The origin of the modulated structure in Sr2CuO3+δ (δ = 0.4): [CuO2] in-plane oxygen vacancy or apical oxygen vacancy?

We propose the question of the modulated structures of copper oxide is caused by the [CuO₂] in-plane oxygen vacancy or apical oxygen vacancy. Sr₂CuO_3+δ single-crystal samples were prepared using high-temperature and high-pressure methods. The major phase of Sr₂CuO_3+δ (δ = 0.4) single-crystal system is found to be constituted by the 5 a modulated structure with the Fmmm space group, which originates from the [CuO₂] in-plane oxygen vacancy appearing in octahedral Cu-O. Besides, the presence of the [CuO₂] in-plane oxygen vacancy may obliterate the superconductivity of the system. Experimental results deduce that the oxygen vacancy may appear in the apical oxygen sites in high-temperature copper oxide superconductors.