新型冷轧(拔)无缝钢管高分子润滑工艺研究

提出了冷轧(拔)无缝钢管高分子润滑工艺。研究了该工艺的PL膜各种特性。介绍了工业实验情况。实验证明,高分子润滑工艺完全满足冷轧(拔)钢管工艺要求,并具有操作简便、环境污染小等优点,完全可以代替传统的磷化-皂化润滑工艺。     

Compact difference method for solving the fractional reaction–subdiffusion equation with Neumann boundary value condition

In this paper, we derive a high-order compact finite difference scheme for solving the reaction–subdiffusion equation with Neumann boundary value condition. The L1 method is used to approximate the temporal Caputo derivative, and the compact difference operator is applied for spatial discretization. We prove that the compact finite difference method is unconditionally stable and convergent with order O(τ^2?α+h⁴) in L₂ norm, where τ, α, and h are the temporal step size, the order of time fractional derivative and the spatial step size, respectively. Finally, some numerical experiments are carried out to show the effectiveness of the proposed difference scheme.     

移动定位技术的现状与发展趋势

基于位置服务为人们的日常生活带来了极大的方便,同时也推动了移动定位技术行业的快速发展。针对移动定位技术发展状况,分析目前主流定位技术的优劣,并对取得的突破作简单的总结归纳。     

Design of a novel static-triggered power-rail ESD clamp circuit in a 65-nm CMOS process基于65纳米CMOS工艺的静态触发型电源钳位ESD保护电路设计

This work presents the design of a novel static-triggered power-rail electrostatic discharge (ESD) clamp circuit. The superior transient-noise immunity of the static ESD detection mechanism over the transient one is firstly discussed. Based on the discussion, a novel power-rail ESD clamp circuit utilizing the static ESD detection mechanism is proposed. By skillfully incorporating a thyristor delay stage into the trigger circuit (TC), the proposed circuit achieves the best ESD-conduction behavior while consuming the lowest leakage current (I_leak) at the normal bias voltage among all investigated circuits in this work. In addition, the proposed circuit achieves an excellent false-triggering immunity against fast power-up pulses. All investigated circuits are fabricated in a 65-nm CMOS process. Performance superiorities of the proposed circuit are fully verified by both simulation and test results. Moreover, the proposed circuit offers an efficient on-chip ESD protection scheme considering the worst discharge case in the utilized process.     

二阶自治广义Birkhoff系统的奇点分析

建立二阶自治广义Birkhoff系统的微分方程.给出该系统的线性化方程,得到该线性方程转化为梯度系统的条件,利用梯度系统的性质对线性系统的奇点进行了分析,然后再利用Perron定理探讨了相应的非线性系统的奇点类型.结果表明,如果线性系统能成为梯度系统,那么相应的非线性系统的奇点可能是结点或者鞍点.     

基于漏磁原理的钢丝绳探伤仪影响因素研究

介绍了钢丝绳探伤仪漏磁检测原理,并使用有限元分析方法分析了传感器零件的材料、钢丝绳的提离距离及断丝根数等对基于漏磁原理的钢丝绳探伤仪检测结果的影响。分析结果表明,提离距离、断丝根数等因素对探伤仪检测结果影响较大,断丝角度、深度等因素影响较小。     

用于腺苷检测的基于级联扩增核酸适体电化学传感界面的构建研究

该文报道了一种基于酶级联扩增的电化学核酸适体检测腺苷的新方法。当腺苷存在时,滚环扩增的引物通过E.coli DNA连接酶的作用与通过巯基组装在金电极上的固定探针连接。在pHi29 DNA聚合酶的作用下,滚环扩增反应进行并产生一条与环形探针完全互补的长的单链,然后将大量金纳米粒子标记的核酸探针与滚环扩增的产物杂交。该传感界面电化学行为的结果表明,通过酶级联扩增的方法提高了检测腺苷的阻抗响应灵敏度,且选择性和重现性良好。用于腺苷的检测时,其线性范围为2.0μmol/L~100μmol/L,最低检测浓度为2.0μmol/L,表明该传感界面的设计可作为一种通用方法而有望用于其它目标物的检测。