Winglet geometry effects on tip leakage loss over the plane tip in a turbine cascade

The effects of winglet offset distance, winglet coverage, and winglet cross section on the over-tip leakage loss for the plane tip have been investigated experimentally in a turbine blade cascade for a tip gap height-to-span ratio of h/s = 1.36 %. The results show that the over-tip leakage loss for the full coverage winglet increases steeply with increasing the winglet offset distance. This loss generation is attributed to flow disturbances over the forward-facing and backward-facing steps within the tip gap. The winglet flush mounted to the tip surface provides the best result. With the leading edge winglet portion or without it, the both-side winglet always provides better aerodynamic performance than the corresponding pressure-side winglet or suction-side winglet. Longer coverage of the both-side winglet leads to lower loss. Therefore, the full coverage winglet performs best in the loss reduction for the plane tip. In general, thinner winglet leads to better aerodynamic result, and the winglet cross section having a slant bottom surface with the smallest thickness at its outer end is recommended.     

Noncovalent Functionalized Graphene-Filled Polyimides with Improved Thermal,Mechanical, and Wear Resistance Properties

A facile method is proposed to prepare poly-o-phenylenediamine (PoPD) noncovalent functionalized graphene (G)-reinforced polyimide (PI) nanocomposites. PoPD-G exhibited excellent dispersibility in various organic solvents. The structures of PoPD-G were characterized by Raman and UV spectrum, which verified the π–π interactions between PoPD and G. The effective exfoliation of graphene nanosheets was investigated by observation of the morphology of PoPD-G with SEM, SPM, and TEM. Compared to PI/G composites, the interfacial adhesion between graphene nanosheets and PI matrices promoted efficient stress transfer from PI chains to PoPD-G nanofillers. Polyimide nanocomposites with different incorporations of PoPD-G exhibited outstanding thermal properties. It is interesting to note that only 0.5 wt% PoPD-G-reinforced PI composites increased by 20.8% in hardness, enhanced by 84.0% in storage modulus, and reduced by 72.8% in wear rate compared with neat PI. The eminent enhancement was attributed to the facile dispersion of graphene nanosheets and strong interface adhesion between PI and PoPD-G.     

CO2探测仪近红外焦平面无效像元检测方法

针对HgGdTe探测器均匀性差、无效像元多,过多无效像元会降低碳卫星CO2探测仪红外焦平面探测器探测精度,提出了一种基于探测器性能测试数据进行无效像元筛选的方法.首先利用CO2探测仪冷光学实验设备采集暗背景数据与响应度数据,然后计算暗背景数据的DN值均值与标准差、各个像元的响应度曲线,利用直方图阈值筛选出暗像元、亮像元、不稳定像元、平均拟合偏差较大等无效像元,最终利用各种无效像元集合交并集确定最终无效像元.结果表明:基于各种无效像元集合交并集确定最终无效像元的无效像元筛选方法准确度更高.通过遍历筛选出无效像元的响应值,从而确认了无效像元筛选的合理性.     

抗差自适应Kalman滤波及其在GNSS导航中的应用

针对Kalman滤波易受粗差影响而导致结果失真的问题,提出一种抗差自适应Kalman滤波方法,该方法结合自适应滤波与抗差Kalman滤波的优点,同时设计自适应因子和抗差因子,采用改进的两段Huber函数与2~3倍的观测噪声中误差来充当抗差因子与粗差判别标准。并对Kalman滤波和抗差自适应滤波(Adaptive Robust Kalman Filtering,ARKF)结果进行比较。车载实验结果表明,ARKF可以有效抵制观测异常对状态估值的影响,同时在系统先验信息不能精确给出的情况下,显著改善了滤波估值的稳定性和可用性。     

Parameters inversion of high central core rockfill dams based on a novel genetic algorithm

Parameters identification of rockfill materials is a crucial issue for high rockfill dams. Because of the scale effect, random sampling and sample disturbance, it is difficult to obtain the actual mechanical properties of rockfill from laboratory tests. Parameters inversion based on in situ monitoring data has been proven to be an efficient method for identifying the exact parameters of the rockfill. In this paper, we propose a modified genetic algorithm to solve the high-dimension multimodal and nonlinear optimal parameters inversion problem. A novel crossover operator based on the sum of differences in gene fragments (SoDX) is proposed, inspired by the cloning of superior genes in genetic engineering. The crossover points are selected according to the difference in the gene fragments, defining the adaptive length. The crossover operator increases the speed and accuracy of algorithm convergence by reducing the inbreeding and enhancing the global search capability of the genetic algorithm. This algorithm is compared with two existing crossover operators. The modified genetic algorithm is then used in combination with radial basis function neural networks (RBFNN) to perform the parameters back analysis of a high central earth core rockfill dam. The settlements simulated using the identified parameters show good agreement with the monitoring data, illustrating that the back analysis is reasonable and accurate. The proposed genetic algorithm has considerable superiority for nonlinear multimodal parameter identification problems.     

Kinetic theory for aquatic animal distribution simulation

Identifying the underlying mechanisms that influence the spatial patterns in populations improves the forecasts of the alternative management strategies on the spatial dynamics of the populations, which are critical for assessing and managing the fisheries and improving the water resource management. This paper described a new approach of the numerical model for the prediction of the aquatic animal distribution in the flows. The model was developed based on the kinetic theory of gases, the mechanism of the aquatic animal movement and the flow hydrodynamic patterns. The model was validated using the available experimental data and an acceptable agreement was obtained. A comprehensive parameter study was then conducted to help understand the impact and the sensitivity of each parameter to the aquatic animal distribution. The promising results of the model reveal the prospect of applying this model to the reliable prediction of the aquatic animal distribution within a relatively large water area.     

“徽派”与“扬气” ——徽州与扬州传统建筑装饰差异性研究

装饰一直都作为建筑不可或缺的组成部分,它给予建筑美学特征,又赋予建筑文化、历史、社会、宗教等象征意义。本文针对徽州建筑,以及徽州文化、经济影响至深的扬州传统建筑,通过分析比较,挖掘不同的地域文化、不同的历史信息、不同的建筑文化。通过装饰对比,研究徽州与扬州传统建筑的互融与差异,揭示徽派建筑与江浙建筑的内在联系。     

试谈高职院校学生思想政治工作有效对策

分析当前高职院校学生思想政治工作中存在的主要问题及原因,提出发挥思想政治课程的主渠道作用,开展社会主义核心价值观教育,开展"党旗领航"主题校园文化建设,增强学生综合素质和有效利用互联网构筑思想政治工作堡垒等有效对策。     

基于地貌与运动学特征的古滑坡群成因分析

针对四川省雷波县马湖古滑坡群规模的新发现,对其地貌与运动学特征进行详细分析,以期研究该滑坡群的成因.依据钻孔及超声波所测量的马湖湖底地形确定古璜琅河河床特征、古滑坡群平面范围和深度;在古滑坡外形、结构及地质环境现场调查的基础上,重点进行地貌分析、古滑坡群分期和确定各期运动轨迹;运用能量守恒方程计算滑坡速度,辅助确定古滑坡群的形成机制.结果表明:滑坡群规模巨大,面积达18.2 km2(包括湖底部分),体积约20×108 m3;滑坡群按照岩性和结构可以分为3区,形成过程分为4期;古滑坡群为多期地震诱发的顺高陡地层界面的高大、高速、远程滑坡;地貌和运动学分析可作为确定古滑坡成因的一种方法.     

裂纹起裂角预测方法研究

本文提出一个新的屈服准则,该屈服准则适用于岩石类材料的小范围屈服,旨在预测弹塑性材料的破坏行为,基于该屈服准则,推导出了I型,II型以及I-II混合型裂纹尖端塑性区半径并对在单轴拉伸和纯剪切等荷载作用下的裂纹尖端塑性区进行了分析。结果显示,荷载加载方式、裂纹倾斜角和材料内摩擦角对塑性区的形状与大小有显著影响。根据对裂纹尖端塑性区的分析,基于如下假设：裂纹沿塑性区最短路径扩展,本文在提出的屈服准则的基础上导出了新的断裂准则,该准则可预测裂纹开裂初始角。相较于其他断裂准则,文献实验结果与本文提出的准则吻合地更好,能更加精确的预测裂纹的起裂角。