二甲醚燃烧用掺杂钡、镍六铝酸盐催化剂的研究

二甲醚是易液化，便于运输，清洁化的新能源。当作为燃料使用时，采用催化燃烧的方法能使得燃烧的起燃温度降低和提高燃烧转化率，克服了普通燃烧的缺点，实现了清洁燃烧。对二甲醚催化燃烧用的催化剂BaNiAl11O19-δ进行了制备与研究。采用溶胶-凝胶法制备六铝酸盐催化剂BaNiAl11O19-δ,考察其对新能源二甲醚催化燃烧反应的活性，并用TG—DTA对催化剂的性质进行考察。结果表明，加入经800℃焙烧4h后又在1200℃焙烧了2h的催化剂，比未加催化剂的燃烧体系T10降低了50℃。用溶胶一凝胶法制备的六铝酸盐催化剂BaNiAl11O19-δ对二甲醚催化燃烧反应具有较高的催化活性。     

Supercritical CO2‐assisted synthesis of poly(acrylic acid)/Antheraea pernyi SF blend

Monomer acrylic acid (AA) and initiator azo‐bis(isobutyronitrile)were carried into Antheraea pernyi silk fibroin (SF) fibers using supercritical CO₂ as a solvent and carrier, followed by free radical polymerization at a suitable temperature, resulting in PAA/SF blends. The binary system of CO₂/AA and the ternary system of CO₂/AA/AIBN systems were studied. Different impregnation conditions, such as time, pressure, and concentration of AA in the fluid phase on mass uptake, were studied. Fourier transform infrared spectroscopy and X‐ray diffraction results confirmed that PAA was indeed present in the silk and that there were intermolecular hydrogen bonds between PAA and SF. According to thermogravimetry and DTG, blending with PAA could enhance the thermal stability of SF slightly. The water retention values indicated that the hydrophilic nature of the fibers was improved. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 864–868, 2005     

有机玻璃的增韧研究

研究了不同聚合方法制备的聚丙烯酸丁酯（PBA）对浇铸型有机玻璃（PMMA）的增韧改性，研究结果表明，当PBA以纳米粒子簇分散在PMMA基体中时，对PMMA有较好的增韧改性效果。当PMMA中无皂乳液聚合PBA（e-PBA)的质量分数为0.5%时。改性PMMA的冲击强度比基体提高38%。SEM观察表明，本体聚合PBA（b-PBA)橡胶粒子以独特的纳米簇状结构均匀分布在PMMA基体中，大量的微裂纹以b-PBA粒子为中心呈放射状向外辐射，这些微裂纹在试样破坏的过程中吸收了大量的冲击能，使改性PMMA韧性得以提高。     

新显色剂4—（2—苯并噻唑偶氮）邻苯二酚—钼（Ⅵ）—OP体系的分光光度研究

在ｐＨ５．０～５．７范围内，新显色剂４－（２－苯并噻唑偶氮）邻苯二酚（ＢＴＡＰＣ）与钼（Ⅵ）和非离子表面活性剂ＯＰ反应，形成稳定的、带负电荷的、紫红色三元胶束配合物。该配合物中Ｍｏ（Ⅵ）与ＢＴＡＰＣ的组成比为１∶２；其λｍａｘ为５６０ｎｍ，对比度（Δλ）为１２８ｎｍ；在２０℃、ｐＨ５．２和μ０．１时，配合物的表观稳定常数为３．０２×１０１０，表观摩尔吸光系数ε５６０为８．１１×１０４Ｌ·ｍｏｌ－１·ｃｍ－１，真实ε５６０为７．６７×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。钼含量在０～０．７２ｍｇ／Ｌ范围内遵从比耳定律。建议了配合物的结构。本法简便、快速、准确，用于合金钢试样中痕量或小量钼的测定，取得了满意的结果。     

国外柴油车减少排放污染的发展趋势

叙述了美国和欧共体柴油车排放法规和最新发展及世界主要固定柴油质量和规格的最新发展趋势，报道了柴油组成和性质对排放物影响的主要研究结果；分析了减少柴油车排放污染的主要措施，例如改进发动机、改进炼油工艺、采用尾气处理、采用颗粒物过滤－捕集器及采用减少尾气排污的三类柴油添加剂，最后提出了几点建议。     

建筑塑料的阻燃和抑烟

建筑塑料是化学建材的重要组成部分，人们关注建筑塑料的阻燃和抑烟问题。本文论述建筑塑料的燃烧过程、阻燃机理、成烟机理，提出了阻燃和抑烟的技术措施。     

Hydrogen bonding,miscibility, crystallization,and thermal stability in blends of biodegradable polyhydroxyalkanoates and polar small molecules of 4‐tert‐butylphenol

The hydrogen bonding, miscibility, crystallization, and thermal stability of poly(3‐hydroxybutyrate) (PHB)/4‐tert‐butylphenol (BOH) blends and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(3HB‐3HHx)]/BOH blends were investigated by Fourier transform infrared (FTIR) spectroscopy, solid‐state¹³C‐NMR, differential scanning calorimetry, wide‐angle X‐ray diffraction (WAXD), and thermogravimetric analysis. The results of FTIR spectroscopy and solid‐state¹³C‐NMR show that intermolecular hydrogen bonds existed between the two components in the blends and that the interaction was caused by the carbonyl groups in the amorphous phase of both polyesters and the hydroxyl groups of BOH. With increasing BOH content, the chain mobility of both the PHB and P(3HB‐3HHx) components was improved. After the samples were quenched, the detected single glass‐transition temperatures decreased with composition, indicating that both PHB/BOH and P(3HB‐3HHx)/BOH were miscible blends in the melt. Moreover, as BOH content increased, the melting temperatures of PHB and P(3HB‐3HHx) clearly decreased, which implied that their crystallization was suppressed by the addition of BOH. Although the crystallinity of PHB and P(3HB‐3HHx) components decreased with increasing BOH content in the blends, their crystal structures were hardly affected after they were blended with BOH, which was further proven by WAXD results. In addition, the thermal stability of PHB was improved by a smaller amount of BOH.     

能流结构图式分析法在丙烯热泵精馏工艺中的应用

提出了一种图式热力学分析新工具－能流结构图，并力图以此为基础，形成一种称之为能流结构图式热力学分析的新方法。该法采用图形方式将技术能量系统的用能特征可视化，使人们便于分析处理大量，复杂的信息，便于把握系统特性，进而完成系统的能量分析与集成，提出创新的节能方案。以该方法在2万t/a的丙烯精馏工艺中的应用为例，证明了新方法的实用性和有效性。     

植酸制备的研究

介绍了制备植酸的一种新方法及制备过程，对实验的各个影响因素作了细致的讨论，得到了实验的最佳工艺条件。     

八碳烯分离工艺的研究

从能量综合集成的角度提出了八碳烯精馏分离工艺 ,对所提流程进行了优化模拟计算及分析 ,为八碳烯分离工艺的施工设计提供了充分的依据。投产情况表明 ,该研究改变了八碳烯的生产现状 ,使得八碳烯生产的经济效益显著提高