Rapid Formation of Active Mesoporous TiO2 Photocatalysts via Micelle in a Microwave Hydrothermal Process

Rapid formation of active, mesoporous, and crystalline TiO₂ photocatalysts via a novel microwave hydrothermal process is presented. Crystalline anatase mesoporous nanopowders 100–300 nm in size with worm hole-like pore sizes of 3–5 nm were prepared by a modified sol–gel of titanium tetra-isopropoxide, accelerated by a microwave hydrothermal process. The organic surfactant, tetradecylamine, which is used as a self-assembly micelle in the sol–gel and microwave hydrothermal process, enables to harvest crystallized mesoporous anatase nanoparticles with a high-surface area. Mesoporous worm hole-like and crystalline powders with surface areas of 243–622 m²/g are obtained. X-ray diffraction, N₂-adsorption isotherms (Barrett–Joyner–Halenda and Brunauer–Emmet–Teller method), scanning electron microscope, and transmission electron microscope are used to identify the characteristics and morphologies of the powders. It is shown that crystallization by calcination at 400°C/3 h inevitably reduced the surface area, while the microwave hydrothermal process demonstrated a rapid formation of crystalline mesoporous TiO₂ nanopowders with a high-surface area and excellent photocatalytic effects.     

加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

Laboratory and field tests with the synthetic sex pheromone of threeMatsucoccus 1 pine bast scales

Matsunone, (2E,4E)-4.6,10,12-tetramethyl-2,4-tridecadien-7-one, is the primary sex pheromone ofMatsucoccus resinosae, M. thunbergianae, andM. matsumurae. The synthetic compound was tested in the laboratory and in field tests with all three species, and significantly more males responded to synthetic matsuone than to controls. The attraction of synthetic matsuone to males in field tests was not significantly different from that of virgin females at the same matsuone release rate. An analog of matsuone previously shown to be biologically active was also tested in the laboratory withM. resinosae andM. thunbergianae, and field tested withM. resinosae. The active analog required a dose approximately 100 times greater than matsuone to yield maximum laboratory bioassay response, and in field tests, attraction was not significantly different from controls at doses at which matsuone was significantly attractive.Homoptera: Coccoidea: Margarodidae.Deceased.     

PC/ABS共混体系的研究进展

综述了PC/ABS共混体系相结构的分析结果、增容技术以及影响PC/ABS合金性能的主要因素。     

ACES尿素装置高压设备腐蚀情况研究

介绍ACES尿素工艺的特点及其设备选材,重点阐述了渭化ACES装置高压设备腐蚀和失效的基本规律,分析了腐蚀产生的原因,从结构设计、钢材选用、设计加工、运行维护和设备管理等方面提出了防范措施。     

聚乳酸的改性及应用进展

综述了近几年聚乳酸生物降解材料的改性进展。改性方法分为化学改性和物理改性。化学改性包括共聚、交联、表面修饰等，主要是通过改变聚合物大分子或表面结构改善其脆性、疏水性及降解速率等；物理改性主要是通过共混、增塑及纤维复合等方法实现对聚乳酸的改进。     

基于k-最近邻筛选的BMA集合预报模型研究

针对冗余训练样本会降低BMA参数求解效率与精度问题,本文提出在BMA运算之前采用k-最近邻(k-nearest neighbor)算法筛选有价值训练样本,并用于BMA参数求解的改进模型。模拟试验在淮河王家坝站进行,分别以k-最近邻筛选、不筛选两种方案为BMA提供训练样本,统计分析两种方案中王家坝站流量模拟结果,评价BMA改进法的性能。模拟结果显示,采用k-最近邻样本筛选方法后,BMA模型对洪水过程以及洪峰的预报精度提升明显;概率预报结果的离散程度降低的同时,可靠性程度获得提升。k-最近邻样本筛选方法的引入,能够有效去除BMA模型训练样本中的冗余数据,以少量的样本获得更可靠的模型参数,改善集合预报性能。     

Preparation and properties of heterocyclically conjugated poly(3‐hexylthiophene)–clay nanocomposite materials

A series of heterocyclically conjugated polymer–clay nanocomposite (PCN) materials that consisted of organic poly(3‐hexylthiophene) (P3HT) and inorganic montmorillonite (MMT) clay platelets were prepared by in situ oxidative polymerization with FeCl₃ as an oxidant. The as‐synthesized PCN materials were characterized by Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (WAXRD), and transmission electron microscopy (TEM). The effects of the material composition on the anticorrosion, gas barrier, thermal stability, flammability, mechanical strength, and electrical conductivity properties of the P3HT and PCN materials were studied by electrochemical corrosion measurements, gas‐permeability analysis (GPA), thermogrametric analysis (TGA), limiting oxygen index (LOI) measurements, dynamic mechanical analysis (DMA), and a four‐point probe technique, respectively. The molecular weights of extracted and bulk P3HT were determined by gel permeation chromatography (GPC) with THF as an eluant. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3438–3446, 2004     

塑料老化性能及使用寿命预测的新方法

提出了利用人工神经网络方法对塑料自然老化性能时间序列进行预测的方法，并建立了计算模型，在此基础上本方法也可对塑料使用寿命进行预测。实例计算证实了这种方法具有良好的精度。     

自并励励磁系统优化改造探讨

乐滩水电厂励磁系统设备运行近十年,设备出现老化,存在安全隐患,对1、2号机励磁系统的优化改造(包括硬件设计和软件设计),完善了控制逻辑,解决了励磁原回路设计缺陷、非专用直流灭磁开关、氧化锌电阻等系统故障率高多项重大安全隐患问题。完成改造后,进行了励磁系统静态试验、动态特性试验、PSS试验、进相试验等,试验技术指标结果均符合国标、部标、行标的要求,开、停机逻辑符合乐滩水电厂需求,联锁条件及判据满足安全要求,达到了改造的预期目的。1、2号机组励磁系统改造运行到今,设备稳定,励磁系统缺陷及故障率为零,效果良好。