Bioluminescence DNA hybridization assay for Plasmodium falciparum based on the photoprotein aequorin

A bioluminescence DNA hybridization assay for the detection of Plasmodium falciparum, the most deadly species of malaria, using the photoprotein aequorin as a bioluminescent label has been developed. The current gold standard for the detection of malaria is light microscopy, which can detect down to approximately 50 parasites/microL of blood, but has low-throughput, high costs, and requires high skill, which limit the applicability of the method, especially in the developing regions where malaria detection is mostly needed. The utilization of aequorin as a bioluminescence label offers the advantages of high signal-to-noise ratio and reliable detection down to attomole levels, allowing for the development of highly sensitive and miniaturized high-throughput bioluminescence assays. Herein, we developed a DNA hybridization assay for the detection of P. falciparum based on the competition between the target DNA and the signal generating DNA streptavidin-aequorin for hybridization with the probe DNA. This bioluminescence hybridization assay demonstrated a detection limit of 3 pg/microL and was employed for the detection of target DNA in standard and spiked human serum samples. The DNA hybridization assay was developed in a microplate format without the need for sample PCR amplification, showing the potential suitability of this method in the parallel analysis of samples by low-trained personnel, such as that typically encountered in developing regions.     

Optimizing process parameters for laser beam micro-marking using genetic algorithm and particle swarm optimization

Laser micro-marking is an efficient technique for permanent marking and logo printing on materials. This study details the selection of an optimal parametric combination for laser micro-marking. In this work, markings were performed on Gallium Nitride (GaN) with varying the levels of marking parameters. The parameters considered in the present work are current (A), pulse frequency (Hz), and scanning speed (mm/sec). This experiment was designed using a “central composite design,” grounded in the response surface methodology. Mark intensity, which is a prominent response in laser marking, was considered the output response. The data interpretation involved analysis of variance (ANOVA) and mathematical modelling between the input parameters. It is essential to determine the relationship and significance of input-output variation. The interaction effect of various input parameters on mark intensity was also studied. Finally, two techniques, namely genetic algorithm (GA) and particle swarm optimization (PSO), were applied, and the optimal settings of input constraints were predicted.     

Corex风口破损分析

Corex是一种使用非炼焦煤及纯氧代替焦炭和空气的熔融还原炼铁新工艺。与高炉工艺相比,Corex风口区域的温度更高,风口的使用寿命是一项重大挑战。在JSW公司,更换烧坏的风口所造成的休风几乎占工厂休风时间的15%。详细分析了风口破损及生产操作参数对破损的影响,以了解破损机理和根源。所有形式的风口破损不可能用一种普遍的原因来解释,但主要的原因集中在:入炉煤粉(6.3mm)过多、煤的平均粒度偏小、渣铁倒灌、关闭风口、结瘤脱落及滑料等。     

Deformation Behavior and Evolution of Microstructure and Texture During Hot Compression of AISI 304LN Stainless Steel

Deformation behavior of hot-rolled AISI 304 LN austenitic stainless steel was studied by hot axisymmetric compression tests at 1173 K, 1273 K, and 1373 K (900 °C, 1000 °C, and 1100 °C) at strain rates of 0.01, 0.1, and 1 s^?1. The flow curves were examined to understand the deformation characteristics. The influence of Zener–Holloman parameter was analyzed using appropriate constitutive models. The activation energy for deformation was found to be 473 kJ/mol. Quantitative microstructural analysis was carried out using Electron backscattered diffraction. Compression at 1173 K (900 °C) at all true strain rates gave rise to partially dynamic recrystallized microstructure with strong α-fiber texture. The deformation texture is characterized by the formation of Brass component, and partial dynamic recrystallization (DRX) led to the development of Goss, S, and ube components. Necklace structure of small equiaxed recrystallized grains could be observed surrounding the large, elongated deformed grains. Compressions at 1273 K and 1373 K (1000 °C and 1100 °C) resulted in fully recrystallized microstructure consisting of mostly Σ3 and Σ9 coincidence site lattice high-angle boundaries. Compression at 1273 K (1000 °C) leads to the formation of low-intensity diffused α-fiber. DRX was confirmed by the presence of Goss, S, Cube, and rotated Cube components. Compression performed at 1373 K (1100 °C) resulted in nearly random texture with traces of α-fiber and prominent Cube/rotated Cube components. The microstructures of the 1173 K (900 °C)-compressed samples were partitioned using grain size and misorientation criteria to quantify DRX.     

An upper bound solution for closed die sinter forging of hexagonal shapes

The paper reports on an investigation into the various aspects of closed die cold forging of hexagonal powder preforms, which have been compacted and sintered from atomized powder. It is found that for certain dimensional ratios of the preform, the die pressure is minimum. An attempt has been made determine the die pressures developed during the closed die forging of the hexagonal powder preform by using an upper bound approach. The results so obtained are discussed critically to illustrate the interaction of various process parameters involved and are presented graphically     

Electrical Characterization of p-Type Pb1−x Eu x Te

The transport properties of p-type Pb_1?x Eu _x Te epitaxial layers were studied as a function of Eu content, temperature, and magnetic field. The low-temperature hole mobility is drastically reduced when the Eu concentration is increased from 0 to 6%, while the hole concentration remains almost constant. A metal-insulator transition was observed for x ≈ 0.04, which is probably induced by the disorder caused by the introduction of Eu. For temperatures down to 10 K, only positive magnetoresistance has been observed at low magnetic fields. An anomalous behavior of the resistivity as a function of temperature has been detected for a Eu content about 5%, which is attributed to the resonance between the localized Eu 4f level and the valence band maximum.     

Microwave Preparation of SiO2-B2O3-Na2O-K2O-CaO-Fe2O3-TiO2 Glass System

This study reports preparation of glass composition （54.50 wt.%） SiO2, （10.80 wt.%） B2O3, （14.20 wt.%） Na2O, （1.20 wt.%） K2O, （6.00 wt.%） CaO, （4.00 wt.%） Fe2O3 and （9.30 wt.%） TiO2 by melt quenching method using direct microwave heating and conventional resistive heating. Study of dielectric loss factor of the glass as function of temperature illustrated increasing loss factor above 370 ℃, 550 ℃, 650 ℃ and 900 ℃, indicating enhanced microwave absorption by the glass at above these temperatures. Chemical analysis results of both the glasses depicted more volatilization loss of volatile ingredients in conventional heating. The study of chemical durability was performed from leachate analysis describing less leaching of Na2O, K2O and other constituents from glass melted in microwave furnace. Glass transition temperatures （Tg） were found to be 576.3 ℃ and 569.5 ℃ for glass melted in conventional and microwave heating route, respectively. Laboratory experiment of glass melting utilizing microwave energy as an alternate heating source demonstrated 70%-75% electrical power saving.     

Hydrostatic Pressure Effect on Ga<Subscript>0.75</Subscript>Cr<Subscript>0.25</Subscript>As DMS: DFT Study

This paper studies the first-principles calculations of the effect of hydrostatic pressure on the structural, electronic and magnetic properties of Ga_0.75Cr_0.25As dilute magnetic semiconductor in zb (B3) phase. High-pressure behaviour of Ga_0.75Cr_0.25As has been investigated between 0 and 100 GPa. The calculations have been performed using DFT as implemented in code SIESTA using LDA + U as an exchange-correlation (XC) potential. The study of band structures shows half-metallic ferromagnetic nature with 100% spin polarization. Under application of external pressure, the valence band and conduction band are shifted from their positions which lead to modification of electronic structure.     

Effect of Disorder on Electronic,Magnetic, and Optical Properties of Co2CrZ Heusler Alloys (Z = Al,Ga, Si,Ge)

This paper presents the effect of disorder on electronic, magnetic, and optical properties of Co₂CrZ (Z = Al, Si, Ga, Ge) Heusler alloy using density functional theory. Binary mixing is the most common form of atomic disorder in these compounds. We have considered three types of disorders: DO ₃, A2, and B2 disorder which corresponds to X-Y, X-Z, and Y-Z mixing, respectively. After structural optimization, we found that A2 disorder has high formation energy and is most unlikely to occur. The half-metallic nature of the alloy is destroyed in the presence of DO ₃ and A2 disorder. The destruction of half-metallicity is due to reconstruction of energy states. B2 disorder retains the half-metallic nature of the alloy but spin-polarization value is reduced slightly as compared to the ordered alloy. In addition, the optical properties such as dielectric function, refractive index, absorption spectra, optical conductivity, reflectivity, and energy loss function of these alloys have also been investigated.