高效能空气净化器评价技术要求国家标准研究

本文论述了编制高效能空气净化器产品评价技术要求国家标准的意义和作用,介绍了标准研制的总体思路和原则,高效能空气净化器的定性和定量评价指标要求,测试、计算和评价方法等,通过国标的研制与实施,将引领并促进高效能空气净化器产品的生产与应用.     

Monitoring the Dynamic Process of Formation of Plasmonic Molecular Junctions during Single Nanoparticle Collisions

The capability to study the dynamic formation of plasmonic molecular junction is of fundamental importance, and it will provide new insights into molecular electronics/plasmonics, single‐entity electrochemistry, and nanooptoelectronics. Here, a facile method to form plasmonic molecular junctions is reported by utilizing single gold nanoparticle (NP) collision events at a highly curved gold nanoelectrode modified with a self‐assembled monolayer. By using time‐resolved electrochemical current measurement and surface‐enhanced Raman scattering spectroscopy, the current changes and the evolution of interfacial chemical bonding are successfully observed in the newly formed molecular tunnel junctions during and after the gold NP “hit‐n‐stay” and “hit‐n‐run” collision events. The results lead to an in‐depth understanding of the single NP motion and the associated molecular level changes during the formation of the plasmonic molecular junctions in a single NP collision event. This method also provides a new platform to study molecular changes at the single molecule level during electron transport in a dynamic molecular tunnel junction.     

智能耳诊机的软、硬件设计

本文从实际应用出发,详尽论述了“智能耳诊机”软、硬件设计的方法。对从事单片机开发应用的工程技术人员有较高的参考价值。     

Growth technique for producing high quality superconducting YBa2Cu3O7-δ single crystals

High quality single crystals of YBa₂Cu₃O_7- (YBCO) have been grown in yttria-stabilized zirconia crucibles by using a flux method. This method yields crystals with area 3 to 4 times larger than a previous method, and 3 to 5 times more crystals. Several crystals as large as 3×4mm² in thea-b plane are routinely obtained from each crucible. The samples typically range from 10 to 60 m thick. The superconductivity transition temperatureT _c of the crystals, measured by magnetic susceptibility, falls in the range 92.5 to 93 K and the smallest transition width (10 to 90%) is less than 0.25 K. Compared with the previous method, the surface is generally smoother, with less flux, and larger untwinned regions of 1 x 1 mm² are usually found.     

Synthesis and characterization of novel blue azo‐dye derivatives containing acrylate group for dye‐based color filters

Abstract— Even though dyes have a fine resolution and good chromaticities, they are not widely used as coloring materials for color filters (CFs) due to their low thermal stability and chemical resistance. A series of azo‐dye derivatives, which consist of two cross‐linkable acrylate or methacrylate groups to improve thermal and chemical properties, have been synthesized and used to fabricate color filters. The spectral properties and chemical/thermal stabilities of the fabricated CFs were investigated by comparing dye‐based CFs, without a complicated dispersion process, but with pigment‐based CFs using dispersed pigment. Also, more properties including the development test and surface morphologies lithographic properties were studied. The synthesized azo dyes were characterized by elemental analysis, UV‐visible spectra, IR, mass, and ¹H‐NMR spectra.     

A comparative study of two techniques for improving power‐handling capability of CMOS T/R switches

This article proposes an asymmetric topology for transmit/receive (T/R) switches and more importantly presents a comparative study of both LC‐tuned and resistive body‐floating techniques for improving the power‐handling capability of the T/R switches in the same 0.18‐μm triple‐well CMOS. It is shown from simulations and measurements that the switches adopting either technique achieve comparable performances. For instance, the switch employing the LC‐tuned body‐floating technique exhibits insertion loss of 1.5 dB, isolation of 23.5 dB, and power‐handling capability of 22.5 dBm at 5.2 GHz, whereas the switch using the resistive body‐floating technique exhibits insertion loss of 1.3 dB, isolation of 24 dB, and power‐handling capability of 22.2 dBm, respectively. Therefore, one can conclude that the asymmetric topology with the resistive body‐floating technique is more suitable for designing T/R switches for wireless local area network applications as it consumes smaller silicon area. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.