平面有限元单元网格自动生成

本文通过对平面三角形单元、四边形单元节点信息及单元定义的分析,用C语言编制了能自动生成平面三节点三角形单元,四节点、八节点四边形单元的有限元问题的前处理程序FEMPRE2D．C．通过使用FEMPRE2D．C程序可大大节省数据录入人员的工作量,减少准备数据的时间,并能消除录入数据时可能发生的错误,从而为正确解决工程问题提供可靠的保证．     

国外污泥处置技术

污泥处置是一个引入注目的问题,本文就区盟及其成员国的污泥产量,质量,污泥处置方式的现状及可能的发展趋势进行了综述与讨论。     

一次风反切系统的数值模拟和多相流动特性分析

四角切圆燃烧锅炉,存在着稳燃和结渣的矛盾,一次风微反切技术已在多台锅炉上得到应用,较好地解决了这对矛盾并能在一定程度上降低ＮＯｘ的排放量。本文把湍流理论和多相流动理论应用于炉内空气动力场的计算机数值模拟,用投影法编制的计算软件对６００ＭＷ锅炉炉内流动进行了计算,得出了一次风反切系统中炉内速度场、实际切圆、颗粒运动轨迹等结果,与冷炉和冷模试验基本吻合,对一次风反切系统的设计和调试具有参考价值。     

High-performance aromatic polyimide fibres

A new polyimide has been synthesized from 3,3,4,4-biphenyltetracarboxylic dianhydride (BPDA) and 2,2-dimethyl-4,4-diaminobiphenyl (DMB). A high-strength, high-modulus, high-temperature fibre has been developed from this polyimide via a dry-jet wet spinning method. The tensile strength of BPDA-DMB fibres is 3.3 GPa and the tensile modulus is around 130 GPa. The compressive strength of the fibres has been investigated through a tensile recoil test (TRT), while the fibre morphology after compression has been studied via polarized light microscopy (PLM) and scanning electron microscopy (SEM). From the TRT measurements, we have observed that the compressive strength of this fibre is 665 (±5) MPa, which is higher than those of other aromatic polymer fibres. The effect of fibre diameter on the compressive strength of BPDA-DMB fibres is not substantial. The critical compressive strain for this fibre at which the kink bands start appearing under the observation of PLM is at 0.51–0.54%. Subglass relaxation processes have been observed and the measure of an apparent relaxation strength may serve as one of the factors which significantly affect the compressive strength of the fibres. Tensile tests of pre-compressed fibres reveal a continuous loss in tensile strength (up to 30%) with increasing the compressive strain (up to 2.6%). PLM and SEM observations show that during the compression BPDA-DMB fibres form regularly-spaced kink bands at ±60 ° (±2 °) with respect to the fibre axis. The kink band density initially increases with the compressive strain, and reaches a maximum at around 1.1%. Further increase of the compressive strain decreases this density due to the merge of the neighbouring bands. The size of kink bands also correspondingly increases within this compressive strain region. The morphological observation via SEM implies the existence of a skin-core structure and microfibrillar texture which are common features in polymer fibres.     

Fast structural optimization with frequency constraints by genetic algorithm using adaptive eigenvalue reanalysis methods

Structural optimization with frequency constraints is highly nonlinear dynamic optimization problems. Genetic algorithm (GA) has greater advantage in global optimization for nonlinear problem than optimality criteria and mathematical programming methods, but it needs more computational time and numerous eigenvalue reanalysis. To speed up the design process, an adaptive eigenvalue reanalysis method for GA-based structural optimization is presented. This reanalysis technique is derived primarily on the Kirsch’s combined approximations method, which is also highly accurate for case of repeated eigenvalues problem. The required number of basis vectors at every generation is adaptively determined and the rules for selecting initial number of basis vectors are given. Numerical examples of truss design are presented to validate the reanalysis-based frequency optimization. The results demonstrate that the adaptive eigenvalue reanalysis affects very slightly the accuracy of the optimal solutions and significantly reduces the computational time involved in the design process of large-scale structures.     

固定电子证据的程序规范研究

由于电子证据是以数字化信息编码的形式出现的数据表现形式,因而具有高科技性、间接性、隐蔽性等特点,决定了电子证据的固定与刑事诉讼中其它证据收集的传统方法有较大的区别。固定电子证据应当遵循合法性、完整性、正当性以及科学性的程序规则。     

奇异值分解视频水印嵌入与检测及安全性测试

文章针对目前现有的基于小波变换和奇异值分解相结合的数字水印算法存在的缺陷,提出了一种新的视频水印算法:以二值图像为水印的混合整数小波变换和奇异值分解的视频水印盲提取算法,重点论述了奇异值分解的视频水印嵌入与检测以及安全性的测试.实验表明,提出的新算法具有较好的高透明性和鲁棒性.     

浅析煤炭企业信息化建设的管控与实施

分析了煤炭企业信息化的现状,以中平能化集团有限责任公司的实践为例,阐述了煤炭企业信息化建设的重点和实施策略,即建设企业信息高速公路、数据存储利用中心、安全生产管控应用系统群、经营管理应用系统群、协同办公应用系统群、高集成度ERP平台等。实践表明,建设煤炭企业信息化可有效提高企业管理水平、办公效率和经济效益。     

新一代液晶显示系统设计与实现

随着时代的演进和科技的进步,液晶显示已经在现代科技产品中得到广泛应用,为了提高液晶显示系统在带有电容触摸技术的现代电子产品中开发与应用,文章中采用新一代8位STM8S208系列MCU和ET-12864F液晶显示模块,设计了一种新型的液晶显示系统;同时介绍了STM8S208单片机的优越性和ET-12864F液晶显示模块的具体操作方法,并给出了单片机STM8S208与液晶显示模块ET-12864F构建的硬件接口电路和程序设计;经实践应用,该液晶显示系统应用开发成本低,效率高具有较好的项目应用参考价值。