In situ study on dendrite growth of metallic alloy by a synchrotron radiation imaging technology

This study was trying to observe the real-time dendrite growth of Sn-Bi and Sn-Pb binary alloys by a synchrotron radiation imaging technology.The imaging system includes an intense and high brightness synchrotron radiation source,a high-resolution and fast-readout charge coupled device camera,an alloy sample and a Bridgman solidification system.The imaging experiments were done at Beijing Synchrotron Radiation Facility with an updated synchrotron radiation imaging technique,diffraction-enhanced imaging,whic...     

Carrying capacity for the electromagnetic suspension low-speed maglev train on the horizontal curve

Aiming at the lateral dislocation between the electromagnets and the rails on a horizontal curve,we investigated a single magnetic bogie of the maglev train in this paper.The magnetic levitation and guidance forces supplied by the suspension modules were deduced by the flux tube method.According to the dynamic equilibrium equations of the maglev train on the curved track with cant,several major factors that influence the carrying capacity were analyzed,and the formula of the carrying capacity was presented....     

Experimental study on high viscosity fluid micro-droplet jetting system

Fluid dispensing is a method by which fluid materials(such as epoxy,adhesive,and encapsulant) are delivered in a controlled manner in electronics packaging.Fluid jetting,derived from inkjet technology,is a noncontact,data-driven fluid dispensing technology.But ideal fluid materials for packaging are usually high viscous,which is difficult to realize by traditional inkjet technology.In this paper,a mechanical micro-droplet jetting system for high viscosity fluid was proposed.It consists of dispensing valve,m...     

Dimensional synthesis of a 3-DOF parallel manipulator based on dimensionally homogeneous Jacobian matrix

A study of dimensional synthesis of a 3-DOF parallel manipulator with coupling of translation and rotation is carried out.The architecture of the manipulator is composed of a moving platform attached to a fixed base through three identical PRS(prismatic-revolute-spherical) serial limbs,whose unique topology leads to the physical unit inconsistency of the conventional Jacobian matrix and the emergence of the parasitic motion.Then this paper introduces a kinetostatic performance index of the manipulator based...     

Research status of key techniques for shock-induced combustion ramjet(shcramjet) engine

As one of the most promising propulsion systems in the future,shock-induced combustion ramjet engine can remedy the disadvantages in the integrated design of scramjet engine and airframe.It can shorten the length of the combustor,lighten the structure weight of the engine and keep better performance in a broad range of flight Mach number.The elementary principle of shock-induced combustion ramjet engine is introduced.The key technologies of this kind of propulsion system are described,while their research s...     

An experimental study on self-output-control characteristics of micro downwind rotor with coning soft blades

In this short paper,we have treated the aerodynamic performance of micro downwind rotor with coning soft blades experimentally.The test wind rotor has the tip diameter of 1.5 m and three two-dimensional NACA0018 blades of 0.15 m chord whose material is light,soft and pliable foam plastic for perfect safety.From the wind tunnel test,it is realized that the performance is manageable by the coning angle of the rotor blade.In the present case,an improvement of the performance in lower wind speeds is achieved by...     

Experimental investigation on a parabolic trough solar collector for thermal power generation

Developing solar thermal power technology in an effective manner is a great challenge in China.In this paper an experiment platform of a parabolic trough solar collector system(PTCS) was developed for thermal power generation,and the performance of the PTCS was experimentally investigated with synthetic oil as the circulate heat transfer fluid(HTF).The solar collector's efficiency with the variation of the solar flux and the flow rate of the HTF was identified.The collector efficiency of the PTCS can be in ...     

Fold-Hopf bifurcation in a simplified four-neuron BAM (bidirectional associative memory) neural network with two delays

The bidirectional associative memory (BAM) neural network with four neurons and two delays is considered in the present paper.A linear stability analysis for the trivial equilibrium is firstly employed to provide a possible critical point at which a zero and a pair of pure imaginary eigenvalues occur in the corresponding characteristic equation.A fold-Hopf bifurcation is proved to happen at this critical point by the nonlinear analysis.The coupling strength and the delay are considered as bifurcation parame...     

Experimental study of CT test on the failure of acrylate spray-applied waterproof layer in the groundwater environment

In this study the computerized tomography (CT) was first used to quantitatively analyze the failure of acrylate spray-applied waterproof membrane in the groundwater environment. The results of the CT tests show that it is feasible to use the CT to quantitatively analyze the failure of the waterproof membrane and the CT method has the advantages of speediness and accuracy that can eliminate the fussy operation process in routine tests. The main conclusions summarized from the study are as follows. First, the...     

Research and Demonstration of Direct Air-Cooling System for 600-MW Fossil-Fired Power Plants

Given the distribution feature of resources such as coal and water, the requirements for the development of Chinese power industry, and the fact of monopoly by foreign companies, it is very necessary and significant to independently research and develop air-cooling technologies. Through experimental research, simulative calculation, process and equipment development, field tests and a demonstration project, the design and operation technologies for air-cooling system are grasped and relevant key equipment is developed. The results of the demonstration project show that the technical indicators for the air-cooling system have met or exceeded the design requirements. Part of the research results have been incorporated into the relevant national design standards. The technologies developed have been applied to more than 23 sets of thermal power units of or above 600 MW in China.