秋季太湖叶绿素a浓度荧光反演研究

基于2007年11~12月太湖全湖实测水质参数和光谱数据,首先利用高斯方程对遥感反射率进行过滤分解,找出叶绿素a(chl\|a)吸收峰675 nm以后的荧光反射峰(Fluorescence Peak:FP),再以662 nm处的反射率为基准,采用归一化荧光高度法进行叶绿素a浓度(C chl-a)反演,得到chl-a反演模型。基于高斯分解获取的chl-a的荧光反射峰值R(FP)与662 nm处的反射率R (662)比值［R(FP)/R(662)］与C chl-a之间存在显著的相关性,该模型为秋季太湖水体C chl-a的最佳反演模型。在高悬浮泥沙条件下,该模型能够较好地表示出叶绿素荧光高度与叶绿素浓度之间的关系,为C chl-a反演提供新的方法和依据,并为传感器敏感波段的选取和设置提供参考。     

Effect of time/temperature treatment parameters on depolymerization of chitosan

Depolymerization of the biopolymer chitosan by an autoclaving process at 121°C and 15 psi was investigated using various treatments. Acetic acid was found to be the most effective solvent in decreasing chitosan viscosity among the six organic acids tested. The rate of viscosity decrease increased with increasing chitosan concentration. The viscosity of 1% chitosan in 1% acetic acid decreased rapidly to 91% of the initial viscosity following the initial 15 min of autoclaving. This decreased gradually to 93% and 94% in 30 and 60 min, respectively, without being adversely affected by the chitosan solution volume. The degree of deacetylation was comparable before and after autoclaving for 60 min. Chitosan at three molecular weights (M_r = 1597, 1110, and 789 kDa) decreased in molecular weight by 46%–51% in the 15‐min treatment, 55%–60% in the 30‐min treatment, and 60%–62% in the 60‐min treatment. The addition of 0.1%–1.0% (v/v) concentrations of hydrogen peroxide to the chitosan solution autoclaved for 15 min decreased viscosity by 94%–98% and molecular weight by 69%–83%. This process is a simple, timesaving, homogeneous depolymerization procedure, and it is possible to prepare partially hydrolyzed chitosan with specified molecular weights by regulating the time of treatment. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1890–1894, 2003     

基于优化支持向量机的人脸表情分类

分析了支持向量机（support vector machine, SVM）目前主要存在的问题和参数选择对分类性能的影响后, 提出了以改进粒子群算法优化SVM关键参数的优化SVM算法。将加入拥挤度因子的微粒群算法引入到SVM中, 在不牺牲泛化性能的前提下, 对其参数进行优化, 增加了SVM初始化参数的多样性, 减慢了局部搜索, 促进其在全局范围内的寻优搜索, 以有效克服SVM算法过分依赖初始值和容易陷入局部极小值的缺点, 并利用由粗到精的策略构造多层SVM人脸表情分类器, 在提高准确率的基础上加快分类的速度。实验证明, 新算法具有速度快、准确率高的优点。     

Novel method for preparation of quaternary ammonium ionomer from epoxidized styrene–butadiene–styrene triblock copolymer and its use as compatibilizer for blending of styrene–butadiene–styrene and chlorosulfonated polyethylene

A novel method for the preparation of a quaternary ammonium ionomer of styrene–butadiene–styrene triblock copolymer (SBS) was developed by a ring‐opening reaction of epoxidized SBS with triethylamine hydrochloride in the presence of a phase transfer catalyst. The optimum conditions were studied. The ionomer was characterized by quantitative analysis, IR spectroscopy, and ¹H‐NMR spectroscopy. Its water absorbency, oil absorbency, dilute solution viscosity, and use as a compatibilizer for the blending of SBS and chlorosulfonated polyethylene (CSPE) were investigated. The results showed that, under optimum conditions, the epoxy groups can be completely converted to the quaternary ammonium groups. The IR spectrum did not exhibit the absorption peak for quaternary ammonium groups, whereas the ¹H‐NMR spectrum and titration method demonstrated it. With increasing ionic group content, the water absorbency of the ionomer increased whereas its oil absorbency decreased. These indicated the amphiphilic character of the SBS ionomer. The dilute solution viscosity of the ionomer in toluene/methanol (9/1) solvent increased with increasing quaternary ammonium group content. The ionomer was used as a compatibilizer for the blends of SBS and CSPE. The addition of a small amount of the ionomer to the blend enhanced the mechanical properties of the blends: 2 wt % ionomer based on the blend increased the tensile strength and ultimate elongation of the blend nearly 2 times. The blends of equal parts SBS and CSPE behaved as oil‐resistant thermoplastic elastomers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1975–1980, 2006     

癫痫脑电的递归确定性分析

利用排序递归图的分析方法对癫痫脑电进行了确定性(DET)的分析,得出癫痫头皮脑电(EEG)的DET高于健康EEG。DET特征的差异性在局部导联上更明显,局部导联的DET特征可以作为癫痫疾病的自动诊断特征。通过分析发作阶段和发作间隙皮层脑电(ECoG)的DET,得出整个频带的DET差别不大,而在beta频带,发作阶段的确定性明显高于发作间隙的DET。Beta频带的DET特征可以作为癫痫发作的预测特征。研究结果为癫痫疾病的自动诊断和癫痫发作预测提供了理论依据。     

硫化物在纳米HZSM-5催化剂上催化转化性能及机理研究

研究了催化裂化（FCC）汽油中硫化物类型和含量，特别考察了各种硫化物在纳米HZSM-5催化剂上的催化转化性能，并探讨了硫化物的加氢脱硫转化机理。结果表明FCC汽油中硫化物主要为硫醇、噻吩、烷基取代噻吩和苯并噻吩等，其中，烷基取代噻吩占总硫化物的65％-73％。在纳米HZSM-5催化剂作用下，FCC汽油的硫化物都较易被脱除。烷基取代噻吩脱硫机理一方面含有直接加氢脱硫反应路线，另一方面含有裂解反应、烷基化反应和异构化反应路线。     

石英陶瓷材料的增强方法

综述了石英陶瓷材料增强的主要方法，内容涉及表面涂层增强、短纤维增强、三维石英纤维编织体增强、单向排列碳纤维增强、石墨颗粒弥散增韧及有机硅树脂增强，并且介绍了这些材料的主要力学性能及用途。     

碳酸丙烯酯脱碳装置技术改造小结

在碳丙脱碳装置中增加了贫液氨冷器 ,改造了碳丙泵 ,增设了变换气氨冷器 ,从而提高了碳丙脱碳装置的吸收和再生效果     

脂肪酸系列表面活性剂的研究进展

概括和综述了4大类10余个脂肪酸系列表面活性剂的合成、性能和应用现状，重点评述了烷醇酰胺及其衍生物、乙氧基化脂肪酸甲酯、脂肪酸甲酯磺酸盐、N-酰基ED3A、氨基酸、咪唑啉、甜菜碱、双子表面活性剂等脂肪酸系列表面活性剂的研究进展。此系列表面活性剂易生物降解、安全、多功能和高效能。