调幅系数为任意值的调幅波研究

本文讨论了调幅系数为任意值的调幅波，给出了它的表达式，频谱与调幅系数，调制效率和信噪比增益的计算公式。     

吸收雷达波包装材料的研究进展

论述了吸收雷达波包装材料的基本组成及其选择原则，在此基础上讨论了吸波材料的吸波原理及影响吸波性能的因素，并指出了吸波包装材料的开发现状和应用进展及其发展万向。     

A geometry-based error estimation for cross-ratios

For choosing specific cross-ratios as 2D projective coordinates in various computer vision applications, a reasonable error analysis model is usually required. This investigation adopts the assumption of normal distribution for positioning errors of point features in an image to formulate the error variances of cross-ratios. Based on a geometry-based error analysis, a straightforward way of identifying the cross-ratios with minimum error variances is proposed. Simulation results show that the proposed approach, as well as a further simplified alternative, yield much better estimations of minimum error variances in terms of accuracy, cost, and stability compared with some other methods, e.g., the one based on the rule given by Georis et al. (IEEE Trans. Pattern Anal. Mach. Intell. 20 (4) (1998) 366). Some causes of the performance differences in the estimations are explained using a special configuration of point features.     

气敏材料的研究进展

从气敏材料种类，制备方法，改善气敏材料缺陷的手段等方面介绍了气敏材料的研究进展，论述了气敏材料研究中的新动向，展望了它的未来发展。     

Colloidal silica removal in coagulation processes for wastewater reuse in a high-tech industrial park.

Four experiments of coagulation and flocculation were conducted to investigate the characteristics of colloidal silica removal in a high-tech industrial wastewater treatment plant for reclamation and reuse of the effluent. Experimental results illustrated that poly-aluminium chloride (PACl) showed higher performances on colloidal silica removal than alum. Interestingly, the two coagulants demonstrated the same capacity on silica removal. The specific silica removal capacity was approximately 0.135 mg SiO2/mg Al2O3 when the dosage of coagulants was in the range 30-150 mg/L Al2O3. In addition, the silica was reduced significantly at the condition of pH above 8. Experimental data implied that precipitation of aluminium flocs was the major mechanism for colloid silica removal in PACl and alum coagulation, besides, charge adsorption was also important for improving removal efficiency. Moreover, the addition of polyacrylic acid (PAA) as a flocculant could slightly advance silica removal in the PACl coagulation. The combined PACl/PAA/flocs coagulation was effective for the removal of colloidal silica, soluble COD, and turbidity and also suitable as a pretreatment unit in wastewater reclamation and reuse processes.     

金属/聚合物复合材料对中能电子的屏蔽作用研究

运用MULASSIS计算程序模拟计算了不同组成的屏蔽材料对空间辐射环境的屏蔽效果,在此基础上进行屏蔽材料的初步设计,并制备了一系列不同组成的金属/聚合物复合材料,结合中能电子照射的实验结果,讨论了组成对金属/聚合物复合材料的屏蔽效果的影响.研究发现,高原子序数和低原子序数金属混合添加的复合物样品具有较好的屏蔽效果.     

溅渣护炉工艺探讨

从炉渣对炉衬和溅渣层的侵蚀机理入手,提出了兼顾冶金和溅渣双重效果的直接造渣工艺,探讨了终渣碱度、MgO、FeO含量等的调整范围,分析了溅渣操作中枪位、时间等的控制和炉底上涨的原因,以期更好地运用溅渣护炉技术。     

高炉冷却壁失效原因研究

本文针对安钢高炉冷却壁破损的形式、原因进行研究分析,探讨了冷却壁的结构、材质、加工与安装工艺对其寿命的影响。介绍了安钢高炉炉役后期冷却壁的维护生产实践。     

催化裂化原位降硫助剂的制备及其性能研究

采用溶胶-凝胶法制备具有介孔结构的降硫基质材料，选择具有降硫选择性的活性元素对合成的基质材料进行改性处理，考察不同的改性方法对制得的催化裂化原位降硫助剂性能的影响，并对基质材料和降硫助剂的结构进行表征。采用美国进口的ACE-R小型催化裂化评价装置将降硫助剂与催化裂化催化剂匹配进行性能评价，在不改变原催化裂化产品分布和产品性质的同时，降低原料的总硫含量，总硫降低可达40％以上。     

山西东南部水电自供区系统网架构建方案探讨

提出山西省东南部水电自供区系统网架构建方案 ,对实施步骤 ,电量供应和平衡、调度通讯以及效益等作了分析和论证 ,对方案的必要性和可行性进行了探讨 ,对以后发展提出了建议