Performance evaluation of a teletext system

Four parameters are defined to measure the performance of a teletext system, namely, the probability of delivering a message within specified time, the transmission efficiency, the average number of errors per page, and the throughput. Each of them is derived and computational results are presented taking the UK teletext system as an example. These parameters are compared in their ability to characterize the performance of the teletext system     

Eradication of Barrett''s mucosa with argon plasma coagulation and acid suppression: immediate and mid term results

Microcapsules are used for the formulation of drug controlled release and drug targeting dosage forms. Encapsulated hydrophobic drugs are often applied as their solutions in plant oils. The uptake of the oils in the complex coacervate microcapsules can be improved by the addition of surfactants. In this study, soybean, olive and peanut oils were chosen as the representatives of plant oils. The well characterized complex coacervation of gelatin and acacia has been used to produce the microcapsules. The amount of encapsulated oil has been determined gravimetrically. The encapsulation of the oils was high (75-80%). When the surfactants with HLB values from 1.8 to 6.7 were used, the amount of encapsulated oil was high (65-85%). A significant decrease of the oil content in the microcapsules was found when Tween 61 with HLB = 9.6 had been added into the mixture. No oil was found inside the microcapsules from the coacervate emulsion mixture containing Tween 81 (HLB = 10) and Tween 80 (HLB = 15), respectively. The results of the experiment confirm the dependence of hydrophobic substance encapsulation on the HLB published recently for Squalan.     

Performance of a non‐load‐bearing steel stud gypsum board wall assembly: Experiments and modelling

A gypsum wall assembly was exposed to an intense real‐scale compartment fire. For the wall assembly, temperatures were measured at the exposed face, within the stud cavity, and at the unexposed face during the fire exposure. Total heat flux gauges were used to measure the temporal variation of the energy incident on the walls, and cameras, both visual and infrared, were used to image the unexposed face of the wall assembly during the fire exposure. The behaviour of the wall assembly under the fire load is discussed as are current model results for a simulation of the fire test. Copyright © 2006 John Wiley & Sons, Ltd.     

Freestanding Alumina Membrane by Double-Layer Anodization

A novel method has been developed for fabricating full or partial freestanding anodic alumina. In our method a sacrificial metal layer is introduced between an Al film and a Si₃N₄ substrate. A freestanding alumina film at wafer scale is successfully achieved by anodizing the double metal layer, during which the alumina is spontaneously stripped off the Si₃N₄ substrate due to the anodic oxidation of the sacrificial layer. The barrier oxide of the alumina film is effectively removed either by H₃PO₄ dissolution or by CF₄ reactive ion etching. The freestanding alumina film is utilized as a contact mask to transfer its nanoporous pattern to a Si substrate. By patterning the sacrificial metal layer with contact lithography, a partial freestanding alumina film is successfully achieved on the silicon chip, producing a unique micro/nanofluidic channel. Compared with previous techniques, the method reported here is advantageous for its simplicity and flexibility     

Copper(II) removal from aqueous solutions by fly ash

The removal of Cu(II) by adsorption on fly ash has been found to be concentration, pH and temperature dependent. The kinetics of adsorption indicates the process to be diffusion controlled. The Langmuir constants have been calculated at different temperatures, and the adsorption has been found to be endothermic (ΔH = 15.652 kcal mol^?1). The maximum removal is observed at pH 8.0, and variation in adsorption with pH has been explained on the basis of surface ionisation and complexation.     

Hydrolysis of Fe(OH)SO4 in the presence of metallic iron

Hydrolysis of Fe(OH)SO₄ was carried out in the presence of metallic iron in order to prevent the formation of iron(III) oxides with strongly bonded sulphate. Under the conditions of the experiment, the products were found to be mixtures of ?-Fe₂O₃ and α-FeOOH. The occluded sulphate, if any, could be easily washed out with water. The hydrolysis reaction passes through an equilibrium state before coming to completion. The entropy with enthalpy of the hydrolysis corresponding to the equilibrium state were found to be 4 e.u. and 0·5 kJ/mol, respectively. The activation energy of the hydrolysis reaction was found to be 21 kJ/mol.     

Corrosion characteristics of aluminium alloy graphite particulate composite in various environments

The present study was aimed at understanding the response of 2014 Al alloy dispersed with graphite particles in various corrosive environments. Marine (sodium chloride) as well as acidic media were selected for the purpose with a view to widen the range of utility of the composite for applications where such environments may be encountered. Studies were also extended to characterize the corrosion resistance of the composite in fresh as well as used lubricating oils to explore the possibilities of using it in bearing, bushing and such other applications. The corrosion behaviour of the base alloy processed under identical conditions was also examined in the above media to see the influence of graphite addition in the alloy. In order to assess the role of the matrix microstructure, the composite as well as the base alloy was subjected to corrosion in heat-treated as well as-cast conditions. It was observed that the specimens suffered from the maximum rate of corrosion in acid, while sodium chloride produced the minimum corrosion rate. Oil in both used and fresh conditions revealed a negligibly small extent of corrosion. The composite was found to show a higher rate of corrosion than the base alloy under identical test conditions. This was attributed to the dispersoid/matrix interfacial corrosion in the case of the graphitic aluminium alloy. Heat treatment of the composite and the base alloy was found to lower the rate of corrosion in the environments tested. Microstructural modifications of the matrix and possible relief of residual stresses were thought to be responsible for the lower rate of corrosion in the heat-treated condition.     

Safety,liveness and fairness in temporal logic

In this paper we present syntactic characterization of temporal formulas that express various properties of interest in the verification of concurrent programs. Such a characterization helps us in choosing the right techniques for proving correctness with respect to these properties. The properties that we consider include safety properties, liveness properties and fairness properties. We also present algorithms for checking if a given temporal formula expresses any of these properties.This work is partly supported by NSF grant CCR-9212183. A preliminary version of this paper appeared in the Fourth ACM Symposium on Principles of Distributed Computing.     

Spectrophotometric determination of some antioxidants with potassium permanganate and metol

New spectrophotometric methods for the assay of some antioxidants have been developed using potassium permanganate and metol (p-N-methyl amino phenol). Metol is oxidised at pH 3.0 with potassium permanganate and coupled with antioxidants to give λ_max at 560 nm for propyl gallate and gallic acid and 510nm for butylated hydroxy anisole. The method is simple, sensitive, reproducible and accurate within ±1% and applicable to the assay of antioxidants (gallic acid, propyl gallate and butylated hydroxy anisole) in oils and fats.