Bimetallic catalysts performance during ethanol steam reforming: Influence of support materials

Ni–Cu catalysts supported on different materials were tested in ethanol steam reforming reaction for hydrogen production. These catalysts were evaluated at reaction temperature of 400 °C under atmospheric pressure. The reagents, with a water/ethanol molar ratio equal to 10, were fed at 70 dm³/(h g_cat) (after vaporization). Analysis of the ethanol conversion, as well as evaluation and quantification of the reaction products, indicated the catalyst 10% Ni–1% Cu/Ce_0.6Zr_0.4O₂ as the most appropriate for the ethanol steam reforming under investigated reaction conditions, among the studied catalysts. During 8 h of reaction this catalyst presented an average ethanol conversion of 43%, producing a high amount of H₂ by steam reforming and by ethanol decomposition and dehydrogenation parallel reactions. Steam reforming, among the observed reactions, was quantified by the presence of carbon dioxide. About 60% of the hydrogen was produced from ethanol steam reforming and 40% from parallel reactions.     

Die Orinoco‐Brücke in Ciudad Guayana/Venezuela – Doppel‐Schrägkabelbrücke mit Verbundüberbau für Straßen‐ und Eisenbahngüterverkehr

The Orinoco River Bridge at Ciudad Guayana / Venezuela – a twin cable‐stayed bridge with steel composite bridge deck for road plus heavy rail traffic. The Orinoco Bridge at Ciudad Guayana carries a single track railway and a 2 × 2 lane highway across the Orinoco. The river has with low water a width of 1 km and with high water a width of 2 km. The total bridge length of 3156 m is subdivided into – the 1320 m long south approach bridge – the 1200 m long twin cable‐stayed bridge – the 636 m long north approach bridge. The bridge deck is a steel composite box girder and was erected partly by launching and partly by free cantilevering erection. The bridge is founded on large diameter bore‐piles. The paper deals with the design, special aspects of the calculation and the construction.     

Pure shear horizontal SAW biosensor on langasite

The undetected introduction of pathogens into food or water supplies can produce grave consequences in terms of economic loss and human suffering. Sensitive and selective sensors capable of quickly detecting microbial pathogens are urgently needed to limit the effects of bioterrorist incidents, accidents, or pollution. Shear horizontal surface acoustic wave (SH SAW) devices provide an attractive platform for the design of microbial biosensors that function in liquid media, where Rayleigh-type modes are rapidly attenuated. This paper reports on an exploratory SH SAW delay line designed and fabricated on langasite, La3Ga5SiO14 (LGS), along the novel Euler propagation direction (0 degrees, 22 degrees, 90 degrees). A liquid chamber was fabricated and attached to the top surface, and the device was submitted to liquid and biochemical tests. Moderate (6 dB) additional attenuation of the transmission coefficient, /S21/, was consistently observed when the SH SAW delay line was assembled in the test fixture and submitted to the liquid tests, indicating that LGS is an attractive candidate for liquid sensing. Sensor selectivity can be achieved by integrating the LGS SH SAW delay line with a biochemical recognition layer. A test setup was implemented for the characterization of LGS SH SAW-based biosensors. The delay line response to biomolecule binding was shown by detection of sequential binding of proteins to the SH SAW device delay path. The biotinylated sensor was exposed sequentially to biotin-binding deglycosylated avidin, biotin-modified rabbit IgG, and goat anti-rabbit IgG antibody. As each protein was bound to the sensing surface, marked changes in the delay-line phase were recorded. The reported results demonstrate the capability of these devices to act as biochemical detectors in aqueous solutions, and this work represents the first effort using the novel material LGS in SAW-based biosensor technology.     

Applications of carbon nanotubes in the twenty-first century

Carbon nanotubes, which consist of rolled graphene sheets built from sp(2) hybridized carbon atoms, are now attracting scientists from various disciplines due to their fascinating physico-chemical properties. In this account, we will review the recent progress on the synthetic techniques for the large-scale production of carbon nanotubes, especially focusing on the floating-catalyst method used in the chemical vapour deposition (CVD) process. We will also describe effective purification methods avoiding structural damage, and discuss the electrochemical applications of these systems including the fabrication of: (i) lithium-ion secondary batteries; (ii) lead-acid batteries; (iii) electric double-layer capacitors; (iv) fuel cells; and (v) multifunctional fillers in polymer composites. We foresee that carbon nanotubes will find numerous applications and take an important place in the development of emerging technologies in the near future.     

The carbon nanocosmos: novel materials for the twenty-first century

Carbon is one of the elements most abundant in nature. It is essential for living organisms and, as an element, occurs in several morphologies. Nowadays, carbon is encountered widely in our daily lives in its various forms and compounds, such as graphite, diamond, hydrocarbons, fibres, soot, oil, complex molecules, etc. However, in the last decade, carbon science and technology have enlarged its scope following the discovery of fullerenes (carbon nanocages) and the identification of carbon nanotubes (rolled graphene sheets). These novel nanostructures possess physico-chemical properties different from those of bulk graphite and diamond. It is expected that numerous technological applications will arise using such fascinating structures. This account summarizes the most relevant achievements regarding the production, properties and applications of nanoscale carbon structures and, in particular, of carbon nanotubes. It is believed that nanocarbons will be crucial for the development of emerging technologies in the following years.     

Dexamethasone prevents interleukin-1beta-mediated inhibition of rat islet insulin secretion without decreasing nitric oxide production

The deleterious effects of interleukin 1 (IL-1) on insulin-producing beta-cells are partly mediated by the generation of the free radical nitric oxide (NO). We aimed to assess the effect of several steroidal hormones on IL-1beta-induced inhibition of rat islet insulin secretion in vitro, and their possible regulatory effects on NO production. Incubation of newborn rat islets for 24 h in the presence of 150 pg/ml IL-1beta revealed that dexamethasone dose-dependently attenuated the inhibitory effect of IL-1beta on insulin release in response to a 2-h glucose challenge. Physiological and supraphysiological concentrations of testosterone, 17beta-estradiol, progesterone, 1,25-dihydroxyvitamin-D3 and vitamin D analogues (KH1060 and MC1288) were ineffective. Dexamethasone (1 microM) increased the production of NO in IL-1beta-treated rat islets, as measured by the concentration of nitrite in the media. However, 1-5 microM dexamethasone inhibited IL-1beta-induced NO production by RIN cells. Dexamethasone (1 microM) did not affect the inhibitory action of the NO donor S-nitroso penicillamine (500 microM) on rat islet insulin secretion. We conclude that dexamethasone partially protects against IL-1beta-induced inhibition of rat islet insulin secretion, an effect which is not mediated through modulation of the NO pathway.     

Concerning a Technique for Increasing Stability of Climbing Robots

Legged-climbing robot is considered. Each foot of the robot has an electromagnet system for robot"s holding on a metal surface. This surface can be both vertical and inclined, including negative slope. Analytical calculation of robot stability under turn over or sliding conditions has been made. Critical slopes have been determined. One of these slopes corresponds to minimal reserve of robot stability towards sliding and another to minimal reserve of robot stability towards turning-over. As total reserve of stability of a robot is always equal to the minimal one of these reserves. Additional support elements of elastic material with high coefficient of friction, along with electromagnet, allows to increase minimal reserve of robot stability towards sliding. The use of such support elements leads to redistributing force of normal support reaction between electromagnet (which surface has low coefficient of friction) and additional support element (which surface has high coefficient of friction). It is just what leads to increasing the total friction force and as a consequence to increasing of minimal reserve of robot stability towards sliding.     

Sweet Wine Production by Two Osmotolerant Saccharomyces cerevisiae Strains

The use of Saccharomyces cerevisiae to produce sweet wine is difficult because yeast is affected by a hyperosmotic stress due to the high sugar concentrations in the fermenting must. One possible alternative could be the coimmobilization of the osmotolerant yeast strains S. cerevisiae X4 and X5 on Penicillium chrysogenum strain H3 (GRAS) for the partial fermentation of raisin musts. This immobilized has been, namely, as yeast biocapsules. Traditional sweet wine (that is, without fermentation of the must) and must partially fermented by free yeast cells were also used for comparison. Partially fermented sweet wines showed higher concentration of the volatile compounds than traditionally produced wines. The wines obtained by immobilized yeast cells reached minor concentrations of major alcohols than wines by free cells. The consumption of specific nitrogen compounds was dependent on yeast strain and the cellular immobilization. A principal component analysis shows that the compounds related to the response to osmotic stress (glycerol, acetaldehyde, acetoin, and butanediol) clearly differentiate the wines obtained with free yeasts but not the wines obtained with immobilized yeasts.