Adaptive passivity-based control of average dc-to-dc power converter models

An adaptive feedback regulation scheme is proposed for the stabilization of average models of dc-to-dc power converters exhibiting unknown but constant resistive loads. The scheme is based on a dynamical feedback policy which suitably modifies the total energy of the closed-loop system while inducing appropriate damping injections on the desired stabilization error dynamics. The performance of the proposed adaptative regulators is tested through computer simulations including stochastic perturbation inputs. © 1998 John Wiley & Sons, Ltd.     

The effects of grape must fermentation conditions on volatile alcohols and esters formed by Saccharomyces cerevisiae

Changes in aroma compounds synthesised from grape must during fermentation carried out by Saccharomyces cerevisiae, in semi-aerobic, anaerobic, short aeration conditions and after adding ergosterol and oleic acid to the must were studied. The biosynthesis of these aroma compounds was strongly dependent on the fermentation conditions and on the growth of the yeast. Ethanol, isoamyl alcohols, isobutyl alcohol, phenethyl alcohol and isoamyl, butyl and hexyl acetates were produced in greater concentrations in semiaerobic conditions, mainly during cellular growth. 1-Butanol and 1-pentanol were produced in greater levels in anaerobic conditions, when cellular growth was lower. Ergosterol and oleic acid added to the musts generally increased the levels of the aroma compounds in wine compared to those obtained in anaerobic conditions. © 1997 SCI.     

Connexin46 Expression Enhances Cancer Stem Cell and Epithelial-to-Mesenchymal Transition Characteristics of Human Breast Cancer MCF-7 Cells

Connexins (Cxs) are a family of proteins that form two different types of ion channels: hemichannels and gap junction channels. These channels participate in cellular communication, enabling them to share information and act as a synchronized syncytium. This cellular communication has been considered a strong tumor suppressor, but it is now recognized that some type of Cxs can be pro-tumorigenic. For example, Cx46 expression is increased in human breast cancer samples and correlates with cancer stem cell (CSC) characteristics in human glioma. Thus, we explored whether Cx46 and glioma cells, can set up CSC and epithelial-to-mesenchymal transition (EMT) properties in a breast cancer cell line. To this end, we transfected MCF-7 cells with Cx46 attached to a green fluorescent protein (Cx46GFP), and we determined how its expression orchestrates both the gene-expression and functional changes associated with CSC and EMT. We observed that Cx46GFP increased Sox2, Nanog, and OCT4 mRNA levels associated with a high capacity to form monoclonal colonies and tumorspheres. Similarly, Cx46GFP increased the mRNA levels of n-cadherin, Vimentin, Snail and Zeb1 to a higher migratory and invasive capacity. Furthermore, Cx46GFP transfected in MCF-7 cells induced the release of higher amounts of VEGF, which promoted angiogenesis in HUVEC cells. We demonstrated for the first time that Cx46 modulates CSC and EMT properties in breast cancer cells and thus could be relevant in the design of future cancer therapies.     

An Upgrade on the Surveillance System of SARS-CoV-2: Deployment of New Methods for Genetic Inspection

SARS-CoV-2 variants surveillance is a worldwide task that has been approached with techniques such as Next Generation Sequencing (NGS); however, this technology is not widely available in developing countries because of the lack of equipment and limited funding in science. An option is to deploy a RT-qPCR screening test which aids in the analysis of a higher number of samples, in a shorter time and at a lower cost. In this study, variants present in samples positive for SARS-CoV-2 were identified with a RT-qPCR mutation screening kit and were later confirmed by NGS. A sample with an abnormal result was found with the screening test, suggesting the simultaneous presence of two viral populations with different mutations. The DRAGEN Lineage analysis identified the Delta variant, but there was no information about the other three mutations previously detected. When the sequenced data was deeply analyzed, there were reads with differential mutation patterns, that could be identified and classified in terms of relative abundance, whereas only the dominant population was reported by DRAGEN software. Since most of the software developed to analyze SARS-CoV-2 sequences was aimed at obtaining the consensus sequence quickly, the information about viral populations within a sample is scarce. Here, we present a faster and deeper SARS-CoV-2 surveillance method, from RT-qPCR screening to NGS analysis.     

Structural analysis of oxyfluoride borate glass and BaF2 crystallization from phase separation

Oxyfluoride glass and glass-ceramics are being studied due to the possibility of their utilization in many applications, such as thermoluminescent dosimeters, optical fibers, fluorescent concentrators, and temperature sensors. In order to improve the properties of glass, they are often crystallized. For this crystallization to be effective, knowledge and control of the structure of the starting material is required. Much work was done on silicate glass; however, a great interest exists in obtaining these kinds of materials in other matrices such as germanates, phosphates, and borates. Here, we present a structural study of some oxyfluoride borate glass with different concentrations of PbF₂ by means of Nuclear Magnetic Resonance (NMR), Raman, and Fourier Transform Infrared (FTIR) spectroscopies. We also analyzed glass-crystallization using Differential Scanning Calorimetry (DSC). The crystallization study was complemented with the use of Transmission Electron Microscopy (TEM) and Selected Area Electron Diffraction (SAED), for the purpose of identifying possible mechanisms of crystallization. Our results indicate, from the structural point of view, that the glass present groups with one or two BO₄ species, such as diborate or pentaborate. The small variation in the BO₄ fraction with the increase in PbF₂ concentration would be an indication of the formation of F⁻BO_3/2 species. Oxyfluoride borate glass containing BaO as a cation modifier and 30% PbF₂ represents a good starting point for obtaining glass-ceramics with a narrow size distribution of BaF₂ nanocrystals. We also propose that the possible mechanism for oxyfluoride borate glass crystallization started with a separation of phases.     

Altitudinal and seasonal variations of persistent organic pollutants in the Bolivian Andes Mountains

Polyurethane foam disk passive air samplers were deployed over four periods of approximately 3 months along an altitudinal gradient (1820, 2600, 4650, and 5200 masl) on the east side of the Andean mountain range in Bolivia. The purpose of the study was to assess the gas-phase concentration and the altitudinal and seasonal trends of organochlorine pesticides and polychlorinated biphenyls (PCBs). Target compounds that were regularly detected included alpha- and gamma-hexachlorocyclohexane (HCH), endosulfans, and select PCB congeners. Endosulfans and HCH concentrations increased with altitude. Enrichment factors (concentration at the highest altitude divided by concentration at the lowest altitude) ranged from 10 to 20 for HCHs and 3 to 10 for endosulfans. Air parcel back trajectory analysis indicated that, in general, the high-altitude sites were exposed to a larger airshed and hence susceptible to long-range atmospheric transport from more distant regions. Seasonal differences were also observed with SigmaHCH concentrations peaking during periods 2 and 3 (March-September 2005). Airsheds (derived from the analysis of back trajectories) for periods 2 and 3 were less oriented along the Andes range (mountain air) with greater input from coastal regions. Endosulfans peaked during periods 1 and 2 (February-June 2005) and also exhibited the highest air concentrations of the target compounds, reaching approximately 1500 pg/m3 at the two highest elevation sites. PCB air concentrations at all sites were generally typical of global background values (<12 pg/m3) and showed no increase with altitude. This is the first study to measure air concentrations of persistent organic pollutants (POPs) in Bolivia and one of only a few studies to investigate altitudinal gradients of POPs.     

Spatial Control of Substitutional Dopants in Hexagonal Monolayer WS2: The Effect of Edge Termination

The ability to control the density and spatial distribution of substitutional dopants in semiconductors is crucial for achieving desired physicochemical properties. Substitutional doping with adjustable doping levels has been previously demonstrated in 2D transition metal dichalcogenides (TMDs); however, the spatial control of dopant distribution remains an open field. In this work, edge termination is demonstrated as an important characteristic of 2D TMD monocrystals that affects the distribution of substitutional dopants. Particularly, in chemical vapor deposition (CVD)-grown monolayer WS₂, it is found that a higher density of transition metal dopants is always incorporated in sulfur-terminated domains when compared to tungsten-terminated domains. Two representative examples demonstrate this spatial distribution control, including hexagonal iron- and vanadium-doped WS₂ monolayers. Density functional theory (DFT) calculations are further performed, indicating that the edge-dependent dopant distribution is due to a strong binding of tungsten atoms at tungsten-zigzag edges, resulting in the formation of open sites at sulfur-zigzag edges that enable preferential dopant incorporation. Based on these results, it is envisioned that edge termination in crystalline TMD monolayers can be utilized as a novel and effective knob for engineering the spatial distribution of substitutional dopants, leading to in-plane hetero-/multi-junctions that display fascinating electronic, optoelectronic, and magnetic properties.     

Design and simulation of a piezoelectric micropump for drug delivery systems

Microsystem Technologies - In this paper a piezoelectric micropump to be used in a drug delivery system is presented, for the specific application of providing synthetic lacrimal fluid to people...     

Processing and characterization of carbon nanofibers obtained from PAN/lignin blends processed by electrospinning

Blankets based on blends with different PAN/lignin ratios (10 and 50% wt. of lignin) were processed via electrospinning. Then, the blankets obtained were thermally treated in order to produce samples of carbon nanofibers. The thermo-oxidative stabilization parameters were defined based on a 2³-factorial design. The samples, after stabilization, were analyzed by differential scanning calorimetry (DSC), thermogravimetry (TGA), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR) techniques. Based on the results, the best parameters for the stabilization of electrospun, blankets were selected, and subsequently, the most adequate carbonization parameters were established to obtain the carbon blankets. The carbonized blankets were characterized for electrical conductivity by impedance spectroscopy, chemical structure (Raman and FT-IR spectroscopies), crystallographic ordering by X-ray diffraction (XRD), and morphology (SEM). The results showed the feasibility of producing carbon blankets based on PAN/lignin blends. However, carbonized blankets showed low carbon yield (10–56%) and a decrease of up to 70% in fiber diameter. XRD and Raman spectroscopy showed that the structural ordering of carbon blankets presents different values according to the heat treatment parameters used (45–57%) and a poorly ordered structure, indicated by the ID/IG ratio.