整体型环氧树脂大孔聚合物的制备与表征

用三亚乙基四胺(TETA)作为固化剂,通过双酚A环氧树脂在聚乙二醇(PEG)介质中的聚合反应诱导相分离制备具有三维骨架结构的整体型环氧树脂大孔聚合物。固定PEG1000与PEG2000的质量比为6∶1,分别研究了环氧树脂与PEG的比例关系和TETA的用量对整体型大孔聚合物孔结构的影响,用FT-IR、SEM、BET和MIP对整体型大孔聚合物进行表征并将其用于重金属离子的吸附。结果表明,改变环氧树脂与PEG的比例关系或者TETA的用量都可以调控大孔聚合物的孔结构,其孔径为0.1~1μm。孔径最小的整体型大孔聚合物比表面积最大,约84.4m~2/g,但孔径较大的整体型大孔聚合物对重金属离子(Cu~(2+))的吸附性能更好,吸附量高达113.1mg/g。     

硝酸羟胺的热稳定性评估及热分解机理研究

为评估氧化剂硝酸羟胺的热稳定性,使用标准液体铝皿于3K/min、4K/min、5K/min加热速率下进行热分析。借助非等温DSC曲线的参数值,应用Kissinger法和Ozawa法求得热分解反应的表观活化能和指前因子,根据Zhang-Hu-Xie-Li公式、Hu-Yang-Liang-Xie公式、Hu-Zhao-Gao公式以及Zhao-Hu-Gao公式,计算硝酸羟胺的自加速分解温度和热爆炸临界温度,并对热分解机理函数进行了研究。设计了7条热分解反应路径,采用密度泛函理论B3LYP/6-311++G(d,p)方法对硝酸羟胺的热分解进行了动力学和热力学计算。计算结果表明,硝酸羟胺热分解的自加速分解温度TSADT=370.05K,热爆炸临界温度Tbe0=388.68K,Tbp0=397.54K,热分解最可几机理函数的微分形式为f(α)=17×(1-α)18/17。硝酸羟胺热分解各路径中,动力学优先支持路径Path 6、Path 5、Path 4和Path 1生成NO和NO_2,其次是Path 2、Path 7和Path 3生成N2和N_2O。温度在373K以下时,Path 1′反应无法自发进行,硝酸羟胺无法进行自发的热分解。从热力学的角度来看,硝酸羟胺在370.05K以下储存是安全的。     

真空有载分接开关常见故障原因及运行可靠提升措施

结合近年发生的多起真空有载分接开关故障案例，分析了真空有载分接开关的常见故障原因，并从设计、生产制造、运行、检修多个阶段提出了提升真空有载分接开关运行可靠性的措施。     

Experimental investigation on preparation and performance of clear asphalt

Abstract

Coloured micro-surfacing technology has become increasingly popular in pavement construction because of its economic benefit and ability to accept traffic quickly. The main goal of this study was to produce a clear asphalt with superior performance that can be easily emulsified. Two types of resin that are easy to emulsify and one kind of extract oil were used to synthesise the clear asphalt. The clear asphalt was mixed with a styrene butadiene styrene (SBS) modifier at different proportions using a mechanical agitator. The physical properties of the samples were determined via conventional bitumen tests and the optimum formula was obtained by changing the mixture ratio through orthogonal experimentation. The thin-film oven test evaluated the ageing property of the clear asphalt. The surface energy components corresponding to the advancing process and the receding process were determined using the Wilhelmy plate method. The surface free energy (SFE) of the aggregates was measured with a gravimetric sorption analyser. The adhesive bond energies between asphalt samples and aggregates were calculated using their SFE components to evaluate their properties of fracture and healing. Results show that depending on the amount and type of resin added, different synthetic clear asphalts can be obtained. Further, the clear asphalt mixed with SBS is capable of synthesising better properties at high or low temperature. The clear asphalt with aggregates had fracture and healing properties similar to common base asphalt.     

Fabrication of TiC/TiB/Ti3AlC2 phases reinforced coatings on Ti-6Al-4V substrate

Intermetallic matrix composite coatings reinforced by TiC, TiB₂, and Ti₃AlC₂ were fabricated by laser cladding the mixed power Ti, Al, and B₄C on the Ti-6Al-4V alloy. X-ray diffraction, scanning electron microscope, and energy dispersive spectroscopy were chosen to investigate the structures and morphologies of the coatings. Results showed that the coatings mainly consisted of the reinforcements of TiC, TiB₂, and Ti₃AlC₂ and the matrix of Ti₃Al, TiAl, TiAl₃, and α-Ti. The hardness and wear-resisting property of the prepared specimens of Ti-45Al-10B₄C and Ti-45Al-20B₄C were studied contrastively. It was found that the coating was metallurgical bonded to the Ti-6Al-4V substrate. The micro-hardness and dry sliding wear-resisting properties of the specimen of Ti-45Al-20B₄C were enhanced further. And the micro-hardness of Ti-45Al-20B₄C was from 900 HV_0.2 to 1225 HV_0.2. The wear-resisting property of Ti-45Al-20B₄C was four times as large as that of the Ti-6Al-4V alloys.     

The interlaminar shear failure characteristics of asphalt pavement coupled heating cables

Nowadays, heating cables are used as heat sources for heating pavements in practical engineering. However, there is a contradiction between the snow melting function and the interlaminar stability of heating pavement. In order to solve the contradiction, the interlaminar failure behavior of asphalt mixture coupled heating cables specimen (AMCS) was researched, through experiments and the finite element method. Under the different conditions of heating cables and rolling times, a series of direct shear tests was performed at the interface of AMCS, to compare the interlaminar stability of three different AMCS. Meanwhile, based on the bilinear cohesive zone model and coulomb friction model a 2D finite element model was established, to simulate this shear failure processes and make up for the limitations of the experiment. According to above test and simulation results, the failure mechanism and the weakest interface in AMCS were found, and the influence of the heating cable’s diameter and embedded spacing on the interlaminar shear strength were found. Then, a modified coulomb theorem model was proposed to predict the shear strength of the AMCS. This research enriches the design theory of the heating pavement and it has great significance for its structural design of heating asphalt pavement.     

Magnetic Properties of Thermal Sprayed Tungsten Carbide–Cobalt Coatings

In the information age, the storage and accessibility of data is of vital importance. There are several possibilities to fulfill this task. Magnetic storage of data is a well‐established method and the range of materials used is continuously extended. In this study, the magnetic remanence of thermally sprayed tungsten carbide–cobalt (WCCo)‐coatings in dependence of their thickness is examined. Two magnetic fields differing in value and geometry are imprinted into the coatings and the resulting remanence field is measured. It is found that there are two effects, which in combination determine the effective value of the magnetic remanence usable for magnetic data storage.

     

Detwinning through migration of twin boundaries in nanotwinned Cu films under in situ ion irradiation

The mechanism of radiation-induced detwinning is different from that of deformation detwinning as the former is dominated by supersaturated radiation-induced defects while the latter is usually triggered by global stress. In situ Kr ion irradiation was performed to study the detwinning mechanism of nanotwinned Cu films with various twin thicknesses. Two types of incoherent twin boundaries (ITBs), so-called fixed ITBs and free ITBs, are characterized based on their structural features, and the difference in their migration behavior is investigated. It is observed that detwinning during radiation is attributed to the frequent migration of free ITBs, while the migration of fixed ITBs is absent. Statistics shows that the migration distance of free ITBs is thickness and dose dependent. Potential migration mechanisms are discussed.     

Dendrite‐Free Lithium Deposition via Flexible‐Rigid Coupling Composite Network for LiNi0.5Mn1.5O4/Li Metal Batteries

Notorious lithium dendrite causes severe capacity fade and harsh safety issues of lithium metal batteries, which hinder the practical applications of lithium metal electrodes in higher energy rechargeable batteries. Here, a kind of 3D‐cross‐linked composite network is successfully employed as a flexible‐rigid coupling protective layer on a lithium metal electrode. During the plating/stripping process, the composite protective layer would enable uniform distribution of lithium ions in the adjacent regions of the lithium electrode, resulting in a dendrite‐free deposition at a current density of 2 mA cm^?2. The LiNi_0.5Mn_1.5O₄‐based lithium metal battery presents an excellent cycling stability at a voltage range of 3.5–5.0 V with the induction of 3D‐cross‐linked composite protective layer. From an industrial field application of view, thin lithium metal electrodes (40 µm, with 4 times excess lithium) can be used in LiNi_0.5Mn_1.5O₄ (with industrially significant loading of 18 mg cm^?2 and 2.6 mAh cm^?2)‐based lithium metal batteries, which reveals a promising opportunity for practical applicability in high energy lithium metal batteries.     

Ultra‐Broadband Flexible Photodetector Based on Topological Crystalline Insulator SnTe with High Responsivity

Topological crystalline insulators (TCIs) are predicted to be a promising candidate material for ultra‐broadband photodetectors ranging from ultraviolet (UV) to terahertz (THz) due to its gapless surface state and narrow bulk bandgap. However, the low responsivity of TCIs‐based photodetectors limits their further applications. In this regard, a high‐performance photodetector based on SnTe, a recently developed TCI, working in a broadband wavelength range from deep UV to mid‐IR with high responsivity is reported. By taking advantage of the strong light absorption and small bandgap of SnTe, photodetectors based on the as‐grown SnTe crystalline nanoflakes as well as specific short channel length achieve a high responsivity (71.11 A W^?1 at 254 nm, 49.03 A W^?1 at 635 nm, 10.91 A W^?1 at 1550 nm, and 4.17 A W^?1 at 4650 nm) and an ultra‐broad spectral response (254–4650 nm) simultaneously. Moreover, for the first time, a durable flexible SnTe photodetector fabricated directly on a polyethylene terephthalate film is demonstrated. These results prove the great potential of TCIs as a promising material for integrated and flexible optoelectronic devices.