6m焦炉投产初期的热工管理

简要介绍焦化厂6m焦炉投产一年多以来的生产现状，整改措施和焦炉热工管理。     

雅克拉凝析气田高压脱水工艺的成功应用

雅克拉凝析气田位于新疆阿克苏境内，2005年11月29日建成投运的260×10⁴m³/d雅克拉集气处理站是目前中石化最大的高压凝析气处理装置。该站的高压分子筛脱水工艺为两塔流程，采用差压再生（吸附压力5.9 MPa、再生压力2.8 MPa）、再生气自动回收工艺技术，并采用时序控制程序自动切换，具有工艺简单可靠、自动化程度高、热能利用率高、脱水露点深度高、操作维护简单、投资较少、运行成本低等优点，自建成投产以来运行稳定，效果十分显著。该工艺装置的成功应用，对类似脱水装置设计、操作具有一定参考价值。     

Symmetric BEM formulations for 2-D steady-state and transit potential problems

This paper presents a new concept for symmetric boundary element method (SBEM) applicable to 2-D steady-state and transit potential problems. Two kinds of SBEM formulations are derived. Symmetry is obtained simply through matrix manipulation, and no hypersingularity appears. Therefore, SBEM is much easier than the traditional symmetric Galerkin BEM. Compared with the traditional asymmetric BEM, the present SBEM can reduce the computational cost for time domain problems only. However, when applied to BEM/FEM coupling procedure, SBEM can reduce the computational cost for both steady-state and time domain problems. Three numerical examples are included to illustrate the effectiveness and accuracy of the present formulations.     

High-yield synthesis of single-crystalline 3C-SiC nanowires by a facile autoclave route

Single-crystalline 3C-SiC nanowires have been synthesized in large scale through a one-step autoclave route by the reaction of SiCl₄, (C₅H₅)₂Fe and metallic Na at 500 °C. Electron microscopy investigations show that the nanowires have typical diameters of 15-50 nm, lengths up to several tens of micrometers and grow along the [111] direction. The possible growth mechanism of the nanowires is discussed.     

碳酸化分解工艺的改进与实践

本文针对烧结法生产氧化铝过程中,铝酸钠溶液的碳酸化分解工艺,由间断分解到连续分解的改进进行了论述,指出连续分解是碳酸化分解的发展方向。     

广钢3#高炉大修炉渣处理工艺探讨与分析

本文对处理高炉炉渣的图拉法工艺设计进行了总结，并对广钢3#高炉使用中出现的问题做了分析，生产实践表明，该工艺安全可靠，水渣质量好，而且有利于环境保护。     

EXPERIMENTAL INVESTIGATIONS ON LONGITUDINAL DISPERSION CHARACTERISTICS OF TIDAL RIVERS

1 .　ＩＮＴＲＯＤＵＣＴＩＯＮＵｎｄｅｒｔｈｅｉｎｆｌｕｅｎｃｅｏｆｎａｔｕｒａｌｔｉｄｅｓ,ｔｈｅｉｎｔｅｒａｃ ｔｉｏｎｓｂｅｔｗｅｅｎｆｌｏｗｆｅａｔｕｒｅｓａｎｄｐｏｌｌｕｔａｎｔｌｏｎｇｉｔｕｄｉｎａｌｄｉｆｆｕｓｉｏｎｉｎｔｉｄａｌｒｉｖｅｒｓａｒｅｉｍｐｏｒｔａｎｔｆｏｒｗａｔｅｒｅｎｖｉ ｒｏｎｍｅｎｔｒｅｃｔｉｆｉｃａｔｉｏｎｉｎｅｓｔｕａｒｉｎｅｒｅｇｉｏｎｓ.Ｔｈｅｄｉｆｆｕ ｓｉｏｎａｎｄｔｒａｎｓｐｏｒｔｏｆｐｏｌｌｕｔａｎｔｉｎｎａｔｕｒａｌｒｉｖｅｒｓｆａｌｌｉｎ ｔｏｍ…     

An Interval Fuzzy Multiobjective Watershed Management Model for the Lake Qionghai Watershed, China

Integrated watershed management is required to ensure the reasonable use of resources and reconcile interactions among natural and human systems. In the present study, an interval fuzzy multiobjective programming (IFMOP) method was used to solve an integrated watershed management problem. Based on system analysis, an IFMOP model suitable for a lake watershed system {IFMOPLWS} was developed and applied to the Lake Qionghai watershed in China. Scenario analysis and an interactive approach were used in the solution process. In this manner, various system components were incorporated into one framework for holistic consideration and optimization. Integrality and uncertainty, as well as the multiobjective and dynamic characteristics of the watershed system, were well addressed. Using two scenarios, two planning schemes were generated. Agriculture, tourism, macroeconomics, cropland use, water supply, forest coverage, soil erosion, and water pollution were fully interpreted and compared to identify a preferable planning alternative for local agencies. This study showed that the IFMOPLWS is a powerful tool for integrated watershed management planning and can provide a solid base for sustainable watershed management.     

一种增强型冲突分解算法

冲突分解算法是一种能有效改善无线信道多址接入协议的方式。本文对传统的冲突分解算法——树形冲突分解算法和先到先服务冲突分解算法进行了深入研究和仿真，探讨了这两种算法的优点和不足之处，提出了一种增强型的冲突分解算法（Enhanced Splitting Algorithm，ESA）。该算法继承了树形冲突分解算法和先到先服务算法的优点，不仅考虑了碰撞分组产生的时间，还考虑了分组的产生间隔，从而有效地提高了冲突分解算法的性能。仿真结果显示ESA算法是一种可行的算法。     

Traction-based Completed Adjoint Double Layer Boundary Element Method in elasticity

This paper is concerned with a traction-based Completed Adjoint Double Layer Boundary Element Method to solve for the surface traction of a system of rigid particles embedded in an elastic matrix. The main feature of the method is a single layer representation of the displacement field, which leads to a system of second-kind integral equations for the traction field, the extreme eigenvalue of which could be deflated, allowing iterative solution strategies to be effectively applied. The method is therefore most suitable for large-scale simulations of particulate solids. The method is benchmarked against some known analytic solutions, including the difficult stress singularity problems at sharp edges. The effectiveness of the method in dealing with a large number of inclusions is also demonstrated with an elongational deformation problem involving up to 25 inclusions.Research supported by the Australian Research Council (to NP-T and X-JF) and the National Natural Science Foundation of China (X-JF).