Synthesis of LaF3 superfine powder by microwave heating method

LaF3 superfine powder was synthesized from La(CH3COO)3 and NH4 F by microwave heating method,using ethanol or pure water as dispersants respectively. The results of XRD and SEM indicate that the superfine powder has high purity, regular particle shape and narrow distribution of granularity. The granularity of the best sample is in the range of 100 -200 nm. The influence of different dispersants on the crystal degree and microstructure was discussed. After the superfine powder was formed into a slice at pressure of 25 - 60 MPa, its electrochemical impedance spectroscopy was tested by electrochemical impedance spectroscopy (EIS) measurement. The result shows that the grain refining of LaF3 powder increases its ionic conductivity. Compared with traditional preparation methods of LaF3 powder, the advantages of microwave heating method were summarized.     

Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation

The ceramic coating formed on AZ91 magnesium alloy by micro-arc oxidation （MAO） was characterized. The results show that the ceramic coating （3.4-23 μm in thickness）on the surface ofAZ91 alloy was attained under different micro-arc oxidation treatment conditions, which consist mainly of MgO, Mg2SiO4 and MgSiO3 phases. Nano-hardness in a cross-sectional specimen was determined by nano-indentation experiment. The MAO coatings exhibit higher hardness than the substrate. Dry sliding wear tests for the MAO coatings and AZ91 alloy were also carded out using an oscillating friction and wear tester in a ball-on-disc contact configuration. The wear resistance of the MAO coatings is improved respectively under different treatment time as a result of different structures of ceramic coatings formed on AZ91 alloy.     

Y3150E型滚齿机简易数控改造

为了能在普通Y3150E型滚齿机上加工出鼓形齿，对其进行了简易数控改造。改造后的滚齿机既维持原机床的加工性能，又扩大了加工范围。制作的数控系统具有结构简单、驱动力大、价格低、抗干扰性能强、安装调试方便等特点。本文主要对研制的简易数控系统的构成、工作原理、硬件电路和软件编程进行了叙述。     

用于数控圆管切割机的CAM系统的开发

介绍了用于数控圆管切割机的CAM系统的总体结构和原理,分析了各模块的功能和实现,提出了该系统的优点.     

新型硬齿面环面蜗杆传动研究

采用精确磨削TI蜗杆的砂轮，用类似直廓环面蜗杆或平面包络环面蜗杆的磨削方法加工环面蜗杆，使该蜗杆和齿面形状与砂轮曲面相同的蜗轮相配合，形成一种新型蜗杆传动，给出了这种传动蜗杆副齿面的数学模型，并通过计算机仿真得出了这种传动蜗轮齿面上接触线的形状及分布特征，初步分析了其啮合特点。     

CNG储气瓶的金属磁记忆检测

使用金属磁记忆检测方法和超声方法对在役的七组公交车CNG高压储气瓶组进行了检测,并对比分析了两种方法的检测结果。结果表明,金属磁记忆方法检测到的可疑区域涵盖了超声检测到的缺陷区域,因此用磁记忆方法检测高压储气瓶,有较高的可靠性和高效性。     

复合合金化对AZ91镁合金铸态组织的影响

利用光学显微镜、扫描电镜和X射线衍射仪研究了0.5?、0.2?、0.2%Sr(质量分数,下同)复合合金化对AZ91合金铸态组织影响。结果表明,0.5?、0.2?、0.2%Sr复合加入可以显著细化合金的铸态组织,0.5?、0.2?、0.2%Sr同时加入,其细化效果优于0.5?和0.2?或0.5?和0.2%Sr的复合加入,并且在组织中出现针状或杆状的Al4Ce新相。     

Fenton试剂处理苯酚和甲醛废水的研究

用H2O2同Fe^2 结合的Fenton试剂处理有机废水是一种经典的催化氧化法，这种方法适合于处理废水中高浓度、难降解的有机物质。主要研究了Fenton试剂处理含苯酚和甲醛有机废水样的反应机理和影响因素，试验结果表明：废水中苯酚和甲醛的去除率均可达到95％以上，COD去除率达到85％以上，表明用Fenton法处理含苯酚和甲醛的有机废水是一种非常有效的方法。     

4,4′-二苯醚二甲酸合成工艺研究

研究了以4,4′-二甲基二苯醚为原料,空气液相催化反应合成4,4′-二苯醚二甲酸。讨论了不同催化剂、催化剂用量、不同溶剂对反应收率的影响,优选出较佳的反应条件。收率达90%,产品纯度达99%。该合成方法收率高、操作简便、母液可反复套用、可减少环境污染,具有工业化生产价值。     

邻羟基环己基丙烯酸酯光聚合动力学研究

采用实时红外光谱技术(RTIR)研究了邻羟基环己基丙烯酸酯(HCA)光聚合反应动力学,探讨了光照强度、光引发剂种类和浓度对其光聚合动力学的影响,并与脂肪族羟基丙烯酸酯单体丙烯酸羟乙酯(HEA)进行了对比。结果表明,最终双键转化率和相对反应速率随光强增大而增加;光引发剂浓度对最终双键转化率和反应速率的影响随引发剂不同呈现不同规律;与HEA相比,HCA具有更高的反应活性,但最终双键转化率较低。