Recover Fault Services via Complex Service-to-Node Mappings in Wireless Sensor Networks

With the motivation of seamlessly extending wireless sensor networks to the external environment, service-oriented architecture comes up as a promising solution. However, as sensor nodes are failure prone, this consequently renders the whole wireless sensor network to seriously faulty. When a particular node is faulty, the service on it should be migrated into those substitute sensor nodes that are in a normal status. Currently, two kinds of approaches exist to identify the substitute sensor nodes: the most common approach is to prepare redundancy nodes, though the involved tasks such as maintaining redundancy nodes, i.e., relocating the new node, lead to an extra burden on the wireless sensor networks. More recently, other approaches without using redundancy nodes are emerging, and they merely select the substitute nodes in a sensor node’s perspective i.e., migrating the service of faulty node to it’s nearest sensor node, though usually neglecting the requirements of the application level. Even a few work consider the need of the application level, they perform at packets granularity and don’t fit well at service granularity. In this paper, we aim to remove these limitations in the wireless sensor network with the service-oriented architecture. Instead of deploying redundancy nodes, the proposed mechanism replaces the faulty sensor node with consideration of the similarity on the application level, as well as on the sensor level. On the application level, we apply the Bloom Filter for its high efficiency and low space costs. While on the sensor level, we design an objective solution via the coefficient of a variation as an evaluation for choosing the substitute on the sensor level.     

Extension of the gap statistics index to fuzzy clustering

The well-known gap statistic index proposed by Tibshirani et al. has successfully applied in many clustering evaluations. However, the gap statistic index cannot evaluate the clustering partitions from any fuzzy clustering algorithm. This is because fuzzy clustering cannot provide the within-cluster similarity measure that is used in the gas statistic index. Thus, the applicable range of the gap statistic index is very limited. In this paper, we present a new method that extends the gap statistic index to fuzzy clustering by using fuzzy membership notations. Our proposed method can extend the applicability of the gap statistic index, and outperform other existing fuzzy indices in several aspects. Experiments on eight sets of synthetic and real datasets are used to verify the applicability and efficiency of the proposed method.     

论现金流量下的企业财务风险防范和控制

1 引言 对于企业来说,现金流量一般是以收付实现制为基础的,它集中反映的信息一般是企业真实的财务现金收入与现金支出,避免在权责发生制下,由于企业资产和负债的确认存在多种不同的方法,最终使得对同一会计事项产生出很多种不同会计信息的可能性,便于该企业进行与本企业各个时期的、各个企业的现金流量信息进行综合的比较和分析,为企业合理组织财务现金调度、风险控制、预测、决策提供比较可靠的依据.     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

浅谈我国网络数据库的发展及对策

从网络数据库的概念、特点、发展趋势等方面论述了我国网络数据库的发展情况,针对我国网络数据库存在的问题提出了发展我国网络数据库的对策.     

一种完整的汉字识别系统设计

数字图像处理是计算机视觉技术的在交通管理领域的一个重要课题.它是指将图像信号转换成数字信号并利用计算机对其进行处理的过程.字符及汉字识别技术的成功运用,节省了大量的人力,而不影响正常的车辆行驶,并且可以快速的记录车辆的违章情况,它是交通管理自动化中的一项有效手段.本文将介绍一种完整的汉字识别系统设计,实现对36号宋体汉字的辨识.     

A piecewise analysis method to stability analysis of linear continuous/discrete systems with time‐varying delay

The delay‐dependent stability problem of linear continuous/discrete systems with time‐varying delay is investigated based on a piecewise analysis method (PAM). In the method, the variation interval of the time delay is firstly divided into several subintervals. By checking the variation of the Lyapunov functional in every subinterval, some new delay‐dependent stability criteria are derived. Several numerical examples show that our method can lead to much less conservative results than those in the existing references. Moreover, when the number of the divided subintervals increases, the corresponding criteria can provide an improvement on the results. Copyright © 2008 John Wiley & Sons, Ltd.     

扭曲的涡旋光束在海洋湍流中的传输因子

基于扩展惠更斯-菲涅尔原理和维格纳分布函数(Wigner distribution function,WDF)二阶矩,推导了部分相干扭曲涡旋光束(partially coherent twisted vortex beam,PCTVB)在海洋湍流中传输时的M2因子和角扩展θ(z)。通过数值模拟方法详细研究了海洋湍流对光束M2因子和角扩展θ(z)的影响,结果表明温度方差耗散率ΧT和温度盐度贡献比w越大、动能耗散率ε和各向异性因子ξ越小时对PCTVB的M2因子和角扩展θ(z)的影响越大。此外研究发现,相较于非扭曲涡旋光束(PCVB),PCTVB有更好的抗海洋湍流的能力,且增大拓扑荷数m以及扭曲因子绝对值｜μ｜后,PCTVB的M2因子和角扩展θ(z)显著减小,光束的抗海洋湍流能力增强。并且增大束腰宽度w0和波长λ,以及减小初始相干长度δηη(η=x,y)同样可以增加光束抗海洋湍流的能力。本文的数值研究结果对海洋光通信具有重要意义。     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.