聚萘二甲酸乙二醇酯(PEN)的研究及发展

综述了聚萘二甲酸乙二醇酯(PEN)的发展历史,合成工艺,应用领域及其与PET的性能比较。     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

Integrated size and topology optimization of skeletal structures with exact frequency constraints

The present paper studies the integrated size and topology optimization of skeletal structures under natural frequency constraints. It is found that, unlike the conventional compliance-oriented topology optimization problems, the considered problem may be strongly singular in the sense that the corresponding feasible domain may be disconnected and the global optimal solutions are often located at the tips of some separated low dimensional sub-domains when the cross-sectional areas of the structural components are used as design variables. As in the case of stress-constrained topology optimization, this unpleasant behavior may prevent the gradient-based numerical optimization algorithms from finding the true optimal topologies. To overcome the difficulties posed by the strongly singular optima, some particular forms of area/moment of inertia-density interpolation schemes, which can restore the connectedness of the feasible domain, are proposed. Based on the proposed optimization model, the probability of finding the strongly singular optimum with gradient-based algorithms can be increased. Numerical examples demonstrate the effectiveness of the proposed approach.     

混炼硅橡胶的配合技术(四)

介绍了几种胶辊用混炼硅橡胶的配制,包括低硬度胶辊用混炼硅橡胶、低环硅氧烷含量的胶辊用混炼硅橡胶、送纸胶辊用混炼硅橡胶及工业胶辊用混炼硅橡胶的配制。     

促进我国硫铁矿制酸的发展

我国硫磺制酸原料主要依赖进口,大量进口硫磺已经影响到世界硫磺的供需关系,硫磺价格居高不下.硫铁矿是我国自有资源,可保证长期、稳定的供应,对我国硫酸工业的稳定和安全具有重要作用,我国发展硫铁矿制酸有其必要性.硫铁矿制酸实现大型化;采用高品位硫铁矿制酸,有效利用铁资源和热能;实现清洁生产,减少废水排放、尾气二氧化硫排放及综合利用废热,是发展方向.抓住硫酸需求增加的机遇,采用先进技术发展硫铁矿制酸,硫铁矿制酸一定会有良好的发展前景.     

脂肪酸系列表面活性剂的研究进展

概括和综述了4大类10余个脂肪酸系列表面活性剂的合成、性能和应用现状，重点评述了烷醇酰胺及其衍生物、乙氧基化脂肪酸甲酯、脂肪酸甲酯磺酸盐、N-酰基ED3A、氨基酸、咪唑啉、甜菜碱、双子表面活性剂等脂肪酸系列表面活性剂的研究进展。此系列表面活性剂易生物降解、安全、多功能和高效能。     

PVC╱NBR╱BR三元共混弹性体的制备

采用结合丙烯腈含量为26％的NBR、分子量适中的悬浮法Ⅲ型PVC和BR共混,制得了综合性能较PVC/NBR并用胶优异的弹性体。优选的工艺条件为:PVC/NBR/BR=30/60/10(质量比);补强剂选用炭黑40份,超细碳酸钙50份,轻质碳酸钙20份;硫化体系选用过氧化物加少量硫磺;混炼温度为140—170℃,混炼时间为10—15min。通过电子显微镜和动态力学分析,弹性体存在两个T,PVC为分散相,橡胶为连续相。     

基于安全隔离的边界防护体系的设计与实现

本文针对电子政务信息系统的特点,设计了基于安全隔离的边界防护体系。将安全隔离技术应用到电子政务中,实现了数据的安全高效实时传输,形成了多方位的安全边界防护体系架构。     

辣椒疫病菌对氟吗啉的抗药性研究

为了评估氟吗啉的未来抗性风险，以辣椒疫病菌为靶标，通过室内抗性菌株的驯化、筛选，以及紫外线诱变等方法，初步探索了辣椒疫病菌对氟吗啉的抗性情况。结果表明：抗性菌株对氟吗啉的抗性倍数较低，在3.45～11．33，生长速率明显低于野生敏感菌株。由此可见辣椒疫病菌对氟吗啉的抗性风险可能较低。     

悬浮液进样-火焰原子吸收光谱法测定茶叶中的微量铬

将茶叶悬浮于琼脂胶体中制成悬浮液 ,直接喷入空气 -乙炔火焰 ,用火焰原子吸收光谱法测定茶叶中的微量铬 ,方法简便、快速、灵敏度和精密度高、测定结果与用灰化法处理样品一致 ,检验表明 ,两种样品前处理方法之间无显著性差异。相对标准偏差为 3.4 %～ 6 .1% ,加标回收率为 95 .7%～ 10 3.8 %。