Effects of extended dislocations on charge distribution in GaN epilayer

We have investigated the effect of extended dislocations (0.5-3 μm) on charge distribution in GaN epilayer grown by metalorganic chemical vapor deposition on (0001) sapphire using atomic force microscopy (AFM) and scanning surface potential microscopy (SSPM). It has been observed for the surface at the extended dislocations present in undoped GaN film to be negatively charged showing 0.04-0.2 V higher potential relative to regions that contain no dislocations. In addition to the higher potential at the dislocation core, the surrounding surfaces, including the edge of the dislocations, are also negatively charged in a symmetric way around the dislocations revealing crater-shaped higher potential regions (∼0.04 V) relative to surrounding dislocation-free area. The experimental results show that the protrusion-type of dislocation is also negatively charged and its potential is dependent on the size of dislocation.     

基于公钥加密算法和PPCT动态图编码的软件指纹方案

提出了一种综合PPCT动态图编码方法和椭圆曲线加密算法的软件指纹方案,该方案将公钥加密技术和软件水印技术综合应用于软件版权的保护和验证过程中,充分利用两者的优势,具有安全性高和抗恶意篡改能力强的特点.     

高温预析出对Al-Zn-Mg系铝合金时效硬化和应力腐蚀的影响

研究了高温固溶后降温处理工艺对中强可使预析出LC52和7039铝合金的组织、时效硬化和应力腐蚀的影响。金相观察发现,高温预析出可优先在晶界处产生,并提高随后时效状态下晶界析出相的不连续分布程度,温度降低到一定程度晶内和晶界产生大量析出。合金拉伸性能和应力腐蚀结果表明,预析出在保持强度和塑性的同时,可提高抗应力腐蚀性能。而预析出温度降低,合金强度呈下降趋势。     

超低密度硬胶极压型油包水乳化钻井液在广安002-H9井的应用

在超低密度钻井液的使用方面，传统的油基钻井液和油包水钻井液存在易着火、安全性差的问题，而最近使用的美国3M公司的中空玻璃微珠聚磺钻井液又存在固控困难、钻井液费用很高等难题。为此，从选择合适的润湿反转剂和阻燃剂入手，在室内对获得的超低密度硬胶极压型油包水乳化钻井液成果配方进行了全面评价，并应用在广安002 H9井水平段欠平衡钻井中取得了良好效果。室内研究与现场应用表明，超低密度硬胶极压型油包水乳化钻井液能够很好地满足广安构造水平井段欠平衡钻井的需要。该钻井液体系具有防塌、润滑、携砂能力强，密度容易控制，钻井液单位成本合理并可重复使用，安全性好等显著特点，适合在类似广安构造的水平井段中推广应用。     

首钢烧结配加扬地粉试验研究

介绍了首钢原料条件下配加扬地粉对烧结生产影响的实验室研究.随着扬地粉配入量的增加,烧结矿转鼓强度、成品率改善,燃耗有少量上升,利用系数增加,低温还原粉化指数变差.研究结果表明:在首钢目前条件下,配入10%～20%的扬地粉是可行的.二烧车间进行了扬地粉工业试验,其最高配比达到30%,工业试验时烧结各项指标变化与实验室试验结果基本一致.     

在LabVIEW程序运行中实现控件的动态移动

通过两种在LabVIEW程序运行中实现控件移动的方法的对比,着重介绍了结合了VI Sever技术的动态注册事件结构的用法,从而总结出其具有优化程序、减少内存、提高CPU利用率等方面的优点.     

基于PMM8731和SI-7300的步进电机驱动电路

PMM8731是日本三洋电机公司生产的步进电机脉冲分配器。而SI-7300则是日本三青公司生产的高性能步进电机集成功率放大器。它们和单片机一起可构成一种高效电机控制驱动电路。文中介绍了PMM8713与SI-7300的功能 ,给出了由它们组成的功率驱动电路及其在步进电机上的应用方法     

基于μPD78F0034单片机的出租车计费器的设计与实现

介绍了基于μPD78F0034单片机和模块式结构的出租车计费器的硬件和软件设计方法，讨论了μPD78F0034单片机的主要特点；介绍了该单片机和PC机串行通信的硬件连接方法；同时给出了采用单、双信号防作弊技术来防止计费器作弊的具体实现方法。     

A new iterative order reduction (IOR) method for eigensolutions of large structures

Order reduction is a computationally efficient method to estimate some lowest eigenvalues and the corresponding eigenvectors of large structural systems by reducing the order of the original model to a smaller one. But its accuracy is limited to a small range of frequencies that depends on the selection of the retained degrees of freedom. This paper proposes a new iterative order reduction (IOR) technique to obtain accurately the eigensolutions of large structural systems. The technique retains all the inertia terms associated with the removed degrees of freedom. This hence leads to the reduced mass matrix being in an iterated form and the reduced stiffness matrix constant. From these mass and stiffness matrices, the eigensolutions of the reduced system can be obtained iteratively. On convergence the reduced system reproduces the eigensolutions of the original structure. A proof of the convergence property is also presented. Applications of the method to a practical GARTEUR structure as well as a plate have demonstrated that the proposed method is comparable to the commonly used Subspace Iteration method in terms of numerical accuracy. Moreover, it has been found that the proposed method is computationally more efficient than the Subspace Iteration method. Copyright © 2003 John Wiley & Sons, Ltd.     

一种环氧树脂阻尼灌封胶的热氧加速老化研究

研究了某种环氧树脂阻尼灌封胶在热氧老化的作用下分子结构、硬度、断面形貌以及动态力学性能随时间的变化．傅立叶红外光谱图表明，所制备的样品环氧基团反应比较完全，热氧老化后试样表面由仲胺和环氧基团形成的酯键发生了部分断裂和氧化；邵氏硬度的增加、瓦向高温区移动则表明在老化过程中复杂的固化反应仍然继续进行；最大损耗因子（tanδmax）波动较小表明试样老化后分子结构几乎保持不变；SEM图片显示试样的冲击断裂由老化前的韧性转变为老化后的脆性断裂．