稀燃车用催化剂的研究进展

稀燃车用催化剂是汽车尾气净化催化剂今后发展的方向，在稀燃条件下如何处理NOx是稀燃车用催化剂面临的巨大挑战。本文详细地评述了近年来国内外在这方面的研究工作，包括选择催化还原催化剂、存储还原催化剂和组合多功能催化剂的研究进展。     

Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation

The ceramic coating formed on AZ91 magnesium alloy by micro-arc oxidation （MAO） was characterized. The results show that the ceramic coating （3.4-23 μm in thickness）on the surface ofAZ91 alloy was attained under different micro-arc oxidation treatment conditions, which consist mainly of MgO, Mg2SiO4 and MgSiO3 phases. Nano-hardness in a cross-sectional specimen was determined by nano-indentation experiment. The MAO coatings exhibit higher hardness than the substrate. Dry sliding wear tests for the MAO coatings and AZ91 alloy were also carded out using an oscillating friction and wear tester in a ball-on-disc contact configuration. The wear resistance of the MAO coatings is improved respectively under different treatment time as a result of different structures of ceramic coatings formed on AZ91 alloy.     

水下隧道穿越管道保护效果测试评价

本文通过对四川气田北干线涪江隧道穿越管道阴极保护电参数的现场测试，取得了实际可信的基础数据，验证了处于水下隧道洞内的穿越段管道，能得到陆上强制电流阴极保护系统的有效保护，保护电流所必经的岩石层和锚喷钢筋混凝土层对保护电流没有构成屏蔽的结论，对管道工程设计和运行管理具有指导作用。     

脱硫塔501-EA的焊接修复

脱硫分厂脱硫塔焊缝缺陷威胁生产，修复后有效消除了隐患，延长设备使用寿命，现系统运行良好。     

共烧陶瓷多层基板技术及其发展应用

论述了高温共烧陶瓷与低温共烧陶瓷的优缺点，并讨论了多层共烧陶瓷的材料选择、工艺过程与控制，然后在提高材料性能方面提出了一些建议和方法，同时介绍了多层共烧陶瓷的国内外研究状况及今后的发展趋势。     

流程生产的可视化整合和多目标优化软件

针对现代企业所面临的挑战，开发了一个软件系统可以根据市场的动态变化和企业内部的设备状况，优化设备配置、优化原料和产品方案。采用可视化形式实施仿真运行和经济效益分析预测。     

Synthesis and characterization of novel aromatic condensation polymers containing rigid benzoxazole pendent groups

A new aromatic diamine monomer containing benzoxazole substituents was prepared by a multistep synthesis starting from 1,4‐dibromo‐2,5‐difluorobenzene. The diamine was polymerized with commercial aromatic dianhydride or dicarboxylic acid chloride monomers to provide several different poly(amic acid)s and polyamides with their inherent viscosities in the range of 0.24–0.46 dL/g. Thermal properties of these polymers including thermal imidization of poly(amic acid)s into polyimides were investigated by using FTIR, DSC, and TGA. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 178–185, 2004     

Isobutylene polymerization in the presence of t-BuCl/SnCl4

Summary The effect of tert-butyl chloride in the polymerizations of isobutylene carried out in the presence of SnCl₄ in dichloromethane at temperatures-20°C and-78°C was investigated. Synthesized polyisobutylene samples showed a bimodal molecular weight distribution (MWD) and it was found that the weight content of the lowermolecular weight (LMW) fraction increased with increasing t-BuCl concentration in the polymerization mixture. The effect of ageing of the initiation mixture t-BuCl/SnCl₄ in CH₂Cl₂ prepared in advance on MWD of the PIB samples was also studied. Ageing of the initiation system supports the formation of the LMW fraction and this oily PIB is the only product of the polymerization at-20°C, .     

铬酸酐副产物硫酸氢钠的利用

对生产铬酸酐时副产的含铬硫酸氢钠的利用作了评论，介绍了8种方法，即，化学沉淀法、磷酸沉淀法、铬酸铬法、电解氧化法、过硫酸钠氧化法、制商品硫酸氢钠、酸泥制碱式硫酸铬、硫酸氢钠制碱式硫酸铬，其中以化学沉淀法、磷酸沉淀法和铬酸铬法应用最广。     

用预分解技术改造Φ4×60m预热器窑的又一成功实例

介绍南京水泥工业设计研究院用预分解生产技术对山东水泥厂Φ4×60m预热器窑烧成系统进行的成功技术改造。技改设计指标为：熟料产量保证指标1500t／d，争取指标1700t／d，熟料热耗＜3762kJ／kg，熟料28d抗压强度＞60MPa。整个工程停产施工耗时仅用48d，烧成系统技改共耗资约3000万元。技改后一次点火投料成功，且点火当月即实现72h达标考核，所有设计指标均达标。