顶封封隔管柱的研制与应用

中原油田近年来注水压力不断升高，井况恶化严重，为此开发了顶封封隔管柱，主要阐述了管柱工况受力特点、结构、工作原理及现场使用效果。经现场较大面积的应用证明，各项性能、技术指标达到了现场要求。     

水平井岩屑录井的影响因素及对策

由于岩屑沉积床的形成、井壁坍塌和井眼不规则、岩屑多次破碎、钻时资料失真及混油钻井液污染等因素影响，水平井的岩屑比普通直井更混杂、更细碎，代表性也更差，岩屑中的油气显示真假难辨。通过加密实测迟到时间，参考钻井参数及DC指数可以对岩屑进行较准确地分层、描述，采用多次荧光滴照、四氯化碳浸泡、气测资料分析等方法，能够有效地区分真假油气显示。     

提高自蔓延高温合成陶瓷内衬钢管性能的研究

在概括了自蔓延高温合成陶瓷内衬钢管的制备原理基础上，从降低陶瓷层孔隙率，减少陶瓷层裂纹和提高陶瓷层结合强度等方面，论述了提高自蔓延高温合成陶瓷内衬钢管性能的措施，对自蔓延高温合成陶瓷内衬钢管的应用现状及展望进行了评述。     

测井新技术在四川油气勘探开发中的应用

综述随着四川盆地油气勘探深入所面临的油气领域复杂和困难的技术问题，介绍应用测井新技术为四川油气开发解决了大量的技术难题，特别是在复杂缝，洞型储层的评价，井旁地质构造形态精细分析和地质，测井，地震多学科结合储层横向预测等3个方面所取得的良好应用效果。     

复合乳化沥青的粘附性试验方法研究

鉴于目前使用的阳离子乳化沥青粘附性试验方法难以有效评价复合乳化沥青粘附性，通过试验研究并综合考虑乳化沥青施工和路用实际情况，提出了乳化沥青水煮法试验方法和采用该方法检验复合乳化沥青粘附性时的评定标准。     

A compact LTCC-based Ku-band transmitter module

Presents design, implementation, and measurement of a three-dimensional (3-D)-deployed RF front-end system-on-package (SOP) in a standard multi-layer low temperature co-fired ceramic (LTCC) technology. A compact 14 GHz GaAs MESFET-based transmitter module integrated with an embedded bandpass filter was built on LTCC 951AT tapes. The up-converter MMIC integrated with a voltage controlled oscillator (VCO) exhibits a measured up-conversion gain of 15 dB and an IIP3 of 15 dBm, while the power amplifier (PA) MMIC shows a measured gain of 31 dB and a 1-dB compression output power of 26 dBm at 14 GHz. Both MMICs were integrated on a compact LTCC module where an embedded front-end band pass filter (BPF) with a measured insertion loss of 3 dB at 14.25 GHz was integrated. The transmitter module is compact in size (400 /spl times/ 310 /spl times/ 35.2 mil/sup 3/), however it demonstrated an overall up-conversion gain of 41 dB, and available data rate of 32 Mbps with adjacent channel power ratio (ACPR) of 42 dB. These results suggest the feasibility of building highly SOP integrated RF front ends for microwave and millimeter wave applications.     

中国陶瓷业如何与国际市场对接——访中国建筑卫生陶瓷协会秘书长缪斌

我国是陶瓷生产大国,近几年发展速度很快.2001年,我国的建筑陶瓷产量约20亿平方米,卫生瓷5000万件以上,全年全行业出口额超过2亿美元,创历史最好水平.加入WTO给我国陶瓷行业带来了很多机遇和挑战,但我们究竟与意大利、西班牙等陶瓷强国差距在哪里呢?记者最近走访了中国建筑陶瓷协会秘书长缪斌先生.恰逢秘书长刚从欧洲考察回来,便聊起这次欧洲之行……     

Accumulation of thiobarbituric acid‐reactive substances in cured pork sausages treated with propolis extracts

Propolis collected by bees has many components that possess antifungal, anticancer and antioxidant properties. Cured ground pork meat was treated separately with 0.4% w/w ethanol‐extracted propolis (EEP 0.4%), 0.6% w/w water‐extracted propolis (WEP 0.6%), 0.8% w/w dried residue of ethanol‐extracted propolis (DREEP 0.8%) and 0.1% w/w potassium sorbate (PS 0.1%) and made into sausages. Thiobarbituric acid‐reactive substances (TBARS) were measured in the sausages to assess the effects of storage at 5, 10 and 20 °C after 0, 2 and 4 weeks. After 4 weeks of storage at 5 °C the sausages treated with EEP 0.4%, DREEP 0.8%, WEP 0.6% and PS 0.1% yielded TBARS values which were 50, 59, 35 and 91% respectively of the control value. There was an increase of 0.33 mg MDA kg^?1, the lowest of all treatments, in TBARS for the 0.4% w/w EEP‐treated sausages. The curing process will control microbiological spoilage, as will potassium sorbate. © 2002 Society of Chemical Industry     

Natural quality two-band LPC coding of speech at 880 bit/s withframe interpolation

A novel frame interpolation technique for two-band linear predictive coding (LPC) vocoders is proposed for maintaining natural speech quality at bit rates below 1 kbit/s. Experimental results show that the speech quality of the proposed vocoder is quite natural at bit rates 880 bit/s and comparable to that of 4.8 kbit/s CELP     

Effects of solidification structure on fatigue crack initiation and fatigue strength in Al−Si−Mg cast alloys

Rotating-bending uniaxial fatigue tests and micro-fatigue crack initiation tests were carried out using a permanent mold cast (PMC) and semi-solid die cast (SDC) with Al−7%Si−0.35%Mg composition in order to examine the relationship between solidification structures and fatigue behaviors. The crack length was measured using a replication method. Fatigue strength was improved in SDC, which was almost consistent with the predicted fatigue strength using the size of Si particle cluster. Resistance to fatigue crack initiation and fatigue strength were improved in SDC owing to the finer Si cluster and to higher ultimate tensile strength. Fatigue crack in PMC was preferentially initiated at pores. For SDC, the fatigue crack was initiated at the Si particle/matrix interface, and then sucessively grew along eutectic cell boundaries.