X荧光光谱法测定不锈钢的研究

本文论述了Ｘ荧光光谱测定高铬钢和不锈钢的分析方法，用理论α系数校正基体效应和用谱线干扰系数Ｌ校正谱线重叠影响。方法准确度和精度令人满意，操作十分简便、快速。     

Performance implications of the thermal-induced frequency drift infast wavelength switched systems with heterodyne detection

The frequency modulation response and tuning dynamics of a two-section DFB laser are determined by carrier and thermal modulation of the active layer refractive index. In response to a step change in the injection current for switching between channels in a wavelength division multiplexed system, the optical frequency changes rapidly due to the carrier effect, and then slowly drifts toward a steady state value due to the thermal effect. For wavelength switched applications with heterodyne detection, the drifting of the optical frequency broadens the spectrum of the IF signal and may impose a limit on the time that the signal remains within the IF passband (residency time). The IF spectral broadening and residency time are investigated theoretically and experimentally. Based upon a minimum mean square error fit between experimental and theoretical FM responses, the dependence of the spectral broadening and residency time on the bias condition of the laser and the optical frequency switching interval is characterized     

FAST MEASUREMENT OF ASH CONTENT IN COAL WASHING PLANT

The coal filter cake is a product of fine coal after floatation which has an ash content of 7-13%, water content of 30±2%, and a particle size of less than 1 mm. The ash content was measured by the intensity of the single backscattered gamma-ray, and its accuracy is mainly dependent on the energy of the gamma-ray. The 238Pu low energy photon source is selected in this work. The energy of its gamma-ray is 15 keV, which can result not only in the best sensitivity, but also in the lowest contribution to the environment radiation. The root mean square deviation of the ash measurement is±0.33% (±1σ).     

Pultruded fibre reinforced polyurethane composites II. Effect of processing parameters on mechanical and thermal properties

This paper presents a novel process for the fabrication of pultruded polyurethane (PU) composites. The effects of the processing parameters on the mechanical properties (flexural strength and flexural modulus, etc.) and thermal properties (HDT) of the fibre reinforced PU composites by pultrusion have been studied. The processing parameters investigated include pulling rate (in-line speed), die temperature, filler type and content, and post-cure time and temperature. Results show that the composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio, the mechanical properties and the thermal properties of composites, the optimum die temperature can be determined. It is found that the mechanical and thermal properties increase with filler content for various types of filler. The mechanical and thermal properties increase at a suitable post-cure temperature and time. Furthermore, the properties which decreased due to the degradation of composite materials for a long post-cure time will be discussed.     

环境放射化学研究中几个问题的讨论

本文从辐射环境保护和公众辐射防护的角度，讨论了放射性核素在环境中的迁移行为，放射性核素与环境介质的相互作用和放射性核素在环境中的形态等涉及到环境放射化学研究方向的问题，并讨论了它们之间相互依存的关系。     

Up-regulation of CIR1/CROC1 expression upon cell immortalization and in tumor-derived human cell lines

Inactivation of 5-HT1A and [3H]5-HT binding sites by N-Ethoxycarbonyl-2-ethoxy-1, 2-dihydroquinoline (EEDQ) was studied in regions of rat brain. After exposure to EEDQ (4 mg/kg body wt.) for 7 days, it is observed that the density of 5-HT1 receptor sites was decreased by nearly 20% in both cortex and hippocampus. The decrease, however, in 5-HT1A sites was more significant (70%) in both the regions. The affinity of [3H]5-HT to 5-HT1 sites was decreased significantly in both cortex and hippocampus after exposure to EEDQ, without affecting the Kd of 5-HT1A sites. Displacement studies suggested that EEDQ has high affinity to 5-HT1 sites with a Ki of 42.9+/-2.4 nM. After exposure neither basal nor 5-HT stimulated adenylyl cyclase activity was changed in cortex. The results of this study suggest that EEDQ decreases the density of 5-HT1 and 5-HT1A receptor sites but does not cause functional downregulation of these sites in rat brain.     

Group decision support system for assessment of problem-basedlearning

Assessment is an important task in problem-based learning (PBL). It has a strong influence on students' approaches to learning and their outcomes. In order to provide an open and fair method of PBL assessment, a group decision support system (GDSS) has been developed. The system uses mathematical decision methods for collecting assessment criteria and their appropriate weights, and databases for storing students' details and data on the assessment criteria. It integrates databases with model bases in a cooperative decision-making environment and is implemented on a client-server platform using a relational database management system. The GDSS has been developed and used to improve the efficiency and quality of assessing students' PBL outcomes     

金刚石光电导探测器研制及在软X光测量中的初步应用

介绍了我们自己设计制造的天然Ⅱａ型金刚石光导探测器的结构，原理，制造工艺，实验标定及其在ＩＣＦ实验中软Ｘ光测量中的应用等。     

型钢矫直中产生缺陷的原因及改进

结合邯郸钢铁集团公司型棒材厂型材矫直后头、尾部普遍存在的问题,分析了产生问题的原因,通过采取一些技术措施产生了一定的效果,进一步提出了对矫直机结构的改进方案。     

灵活运用数据库设计理论

简介了关系模型、键、完整性规则、E-R模型、函数依赖、模式分解和关系模式的范式等数据库技术基础和规范化设计理论，从键和完整性规则的实现、数据冗余的特殊情况和字典设计等方面论述了在实际设计工作中如何灵活运用关系数据库设计理论。