Electrolyte/Structure?Dependent Cocktail Mediation Enabling High?Rate/Low?Plateau Metal Sulfide Anodes for Sodium Storage

As promising anodes for sodium-ion batteries, metal sulfides ubiquitously suffer from low-rate and high-plateau issues, greatly hindering their application in f...     

Synthesis and characterization of La2Ti2O7 employed for photocatalytic degradation of reactive red 22 dyestuff in aqueous solution

Perovskite structured La₂Ti₂O₇ catalyst prepared by polymerized complex method was characterized and examined the photocatalytic activity by decomposing an azo dyestuff, Reactive Red 22, in aqueous solutions under UV irradiation. La₂Ti₂O₇ powders prepared by polymerized complex method exhibit higher surface areas, better homogeneity and are more sensitive to solution than those prepared by solid-state method. The first derivatives of UV–vis DRS patterns confirmed the complete crystallization of La₂Ti₂O₇ sintered at temperatures higher than 900 °C. The effects of sintering temperature of catalyst and solution pH of photocatalytic reaction were studied. The photocatalytic decomposition of Reactive Red 22 per unit surface area was found to be higher for experiments using La₂Ti₂O₇ than using TiO₂. However, the electron–hole recombination was found to be more obvious for La₂Ti₂O₇ than for TiO₂ because the network of metal cations constructed within La₂Ti₂O₇ enhances the mobility of photogenerated electrons and holes.     

Study on Microstructure and Mechanical Properties of Hot Rolled Low Silicon Containing Phosphorus TRIP Steel

The effects of final air cooling temperature on the microstructure and mechanical properties of hot rolled 0.2C-1.9Mn-0.5Si-0.08P TRIP steel were studied by utilizing OM, SEM, TEM and tensile tests. Experimental results showed that in the multiphase microstructure of the investigated steel when the finish rolling temperature was about 820 ℃ and the final air cooling temperature was in the range of 630-700 ℃, the grain size of most of ferrite was finer (about 4 μm) and which had higher dislocation density, t...     

Progress in Thermal Contact Resistance

The developments of aeronautics and astronautics require engines of higher quality. The temperature distribution in combustion engine is highly influenced by the thermal conduct resistance. To predict the temperature field of the hot-end assemblies of combustion engine, the thermal contact resistance must be considered. The object of the study is to propose a model of high application including in conditions of high temperature and high pressure. Up to date, many models and empirical or semi-empirical corre...     

离子交换纤维微观形貌特点及结构修饰研究

利用比表面积测试仪、扫描电子显微镜等物理化学方法对颗粒与纤维状离子交换剂的链间交联与微观形貌进行了研究,通过刚性交联剂对聚丙烯-苯乙烯-二乙烯基苯(PP-ST-DVB)离子交换纤维骨架结构进行了修饰改造。结果表明:离子交换纤维由于不能通过交联剂与致孔剂参与下的单体聚合构建具有丰富微孔的高分子骨架,所以不存在丰富孔结构和高比表面积特征,其内部为连续凝胶相结构;外比表面积大、传质距离短、交联键分布均匀是其反应动力学和渗透压稳定性能优异的主要原因;刚性交联剂在PP-ST-DVB纤维上的附加交联反应使其比表面积从原来的0.5 m~2/g提高到200 m~2/g以上,附加交联反应所形成的分子尺度微孔孔径分布窄,具有超高交联树脂的结构特点。     

电力系统稳定性计算用励磁系统数学模型的完善

在已有电力系统稳定性计算用励磁系统数学模型(以下简称:励磁模型)的基础上,结合励磁系统的调研和参数测定工作,对励磁模型进行了4个方面的改进与完善;增加了并联PID控制;增加了PID控制的限幅环节;对原有晶闸管整流器模型进行了补充修订;对低励限制环节(UEL)的限制曲线设置进行了修改。     

High output impedance current-mode first-order allpass networks with four grounded components and two CCIIs

Eight current-mode first-order allpass networks using second-generation current conveyors (CCII) are presented. Each of the proposed circuits employs two CCIIs, two grounded capacitors and two grounded resistors. The networks offer high output impedances. Experimental results are also included.     

Amplifier linearization using compact microstrip resonant cell-theory and experiment

This paper presents a novel technique for reducing the intermodulation distortions (IMDs) in power amplifiers. In this method, both second- and third-harmonic components generated by the transistor are reflected back simultaneously by the compact microstrip resonant cell (CMRC) at the input port with proper phases to mix with the fundamental signal for the reduction of IMDs. A rigorous mathematical analysis on the effectiveness of multiharmonic reflections has been formulated and derived using the Volterra series. Moreover, the delay mismatch factor of the proposed method is analytically studied and the result shows that a better tolerance to the delay error can be achieved by using CMRC circuitry. Standard two-tone test measurements reveal 32- and 22-dB reductions for the third-order IMD and fifth-order IMD, respectively, without affecting the fundamental signal at 2.45 GHz. Meanwhile, the proposed approach gives a peak power added efficiency of 53% with 11.5 dB transducer gain and 15 dBm output power for a single-stage SiGe bipolar junction transistor. The adjacent channel power ratio (ACPR) is -55dBc for a data rate of 384-kb/s quadrature phase shift keyed modulated signal with 2-MHz spanning bandwidth, and this ACPR is maintained for a broad range of output power level.