Study of the Mössbauer effect on rare-earth borided surface layers on pure iron

Journal of Materials Science Letters -     

精铸件结构优化设计实践

以6种典型的精密铸件为例，利用“6个千方百计”原则对产品结构进行优化设计，同时辅助有限元分析对优化结果进行再验证。通过减少大平面、避免深长孔、采用加强筋等优化措施，有效地避免了夹砂、鼓包、跑火、缩孔、裂纹等铸造缺陷，实现了少无切削和减轻铸件质量。     

提高E^2PROM中NMOS管源漏穿通电压的实验研究

为了提高Ｅ＾２ＰＲＯＭ中Ｎ管源漏穿通电压，用实验的方法对制造工艺进行了研究。结果表明，高能量注入是提高ＶＰＴ的有效手段，但受到ｐｎ结击穿的限制，只适用于低区短沟Ｎ管；ＤＤＤ工艺大幅度高ＶＰＴ，但ｐｎ结击穿电压低于２０Ｖ，不能应用于高压ＭＯＳ管；采用适量的防穿通注入和适当增大沟道长度为最理想的工艺途径。     

InGaAs（P）分别限制应变单量子阱激光器的优化设计

针对较常用的ＩｎＧａＡｓ（Ｐ）分别限制应变单量子阱激光器，给出了为得到最大净增益的优化设计参数。对于激射波长为１．５５μｍ的无应变激光器，最佳的光限制层波长为１．２４μｍ，厚度为１００ｎｍ。当阱材料引入压缩应变后．由于价带的有效状态密度减小，量子阱激光器的微分增益变大，阱深的增大对增大线性增益的效果更加明显．所以最佳光限制层的波长将变短，为１．２０μｍ     

卤化银探测器及其某些特性

文中简述了卤化银(主要是溴化银)单晶片的某些特性,氯化银单晶片与此大致相似。作为低温晶体探测器,对~(241)Am-α放射源,分辨率为17%。卤化银晶片是固体电解质,只有Ag离子对输出电信号有贡献,有显著的极化现象。在液氮槽内溴化银晶片的电导率在几个数量级内成为可控的,由在室温下外加偏置电压大小所引起的分解状态下的初始电流决定。     

Heating energy use management in residential buildings by temperature control

This paper presents the results of analytical investigations to determine the potential heating energy savings that can be achieved in residential buildings by controlling the house temperature through either night setback or night setback plus day zone setback. A typical U.S. single family house is analyzed for different levels of thermal integrity of the building envelope (i.e., levels of insulation, window glazing, and infiltration). Reduced infiltration, insulated interior walls, and various window orientations are also considered. Results are given for four major U.S. climate zones—cool, temperate, hot-humid, and hot-arid. The analysis shows that both types of setbacks are most effective in loose houses, with the greatest absolute savings for the cool climates, and the greatest percent savings for the hot climates. However, the benefits from thermostat setbacks are smaller for tighter houses, and may actually be counterproductive owing to corollary effects such as increased peak loads and degradation of system efficiency.