连续输出20WAlGaAs／GaAs量子阱激光二极管线列阵

采用ＭＯＣＶＤ实现了ＡｌＧａＡｓ／ＧａＡｓ量子阱结构，获得了连续输出２０Ｗ激光二极管线列阵，线列阵长度１．０ｃｍ，激射波长８０８±４ｎｍ。     

Long fiber reinforced polyamide and polycarbonate composites. II: Fatigue behavior and morphological property

Fatigue behavior and morphology of long glass fiber reinforced semicrystalline polyamide (nylon 6,6) and amorphous polycarbonate (PC) composites were investigated. The fiber length distribution in the molded samples was calculated by image analyzer. The tension-tension fatigue loading tests at various levels of stress amplitudes were studied. The two-parameter Weibull distribution function were applied to obtain the statistical probability distribution of experimental data. A good correlation existed between the experimental data and the Weibull distribution curves. Straight line S? N curves of long glass fiber reinforced semicrystalline polyamide and amorphous polycarbonate composites at various probabilities were established. The stiffness of the composite under tension-tension fatigue loading was measured. The thermal stress history was also investigated by thermo-imaging techniques during fatigue life testing. Further, failure morphology was examined by scanning electron microscopy (SEM). The results showed that the fracture behavior of the ductile damage in polyamide is different from the brittle damage in polycarbonate.     

非协调h－p型有限元补偿法

详细讨论了非协调ｈ－ｐ型有限元的补偿法，给出了令人满意的收敛阶．     

Nedocromil sodium in treatment of bronchial asthma

Clinical study on efficiency of the nedocromil sodium (Tilade, Fisons) was performed in 20 patients with atopic and nonatopic bronchial asthma. The drug was administrated in dose of 8 mg per day for 2 months which allowed to renounce regular using of Beclocort forte after 7 days of the treatment. In both types of bronchial asthma the positive effect of nedocromil sodium was confirmed, causing increase of pulmonary ventilation and decrease of bronchial hyperactivity. Especially profitably effect was noticed in atopic bronchial asthma in which statistically important increase of peak expiratory flow (PEF) was obtained and decrease of bronchial hyperreactivity by PC20 for histamine was observed (p < 0.05). Mentioned above spirometric parameters did not differ in statistically important pattern in patients with nonatopic bronchial asthma, when Beclocort forte group with Tilade group compared. Neither important differences in general number of cells nor percentage composition of cell smears were observed in bronchoalveolar lavage fluid.     

超细铁粉和氧化铁颗粒的研究

用透射电镜和图像分析仪等研究了超细铁粉和γ-Fe_2O_3粉末的结构、形貌、粒子的平均尺寸以及粒度分布。研究结果表明,多数超细铁粉粒子近似呈球形,并且,铁粉粒子由两相组成,粒子的核心部分是金屑a-Fe,表面的包裹层为氧化物层,它由Fe_3O_4和7-Fe_O_3的混合物组成。氧化层的平均厚度大约占整个粒子直径的20％左右。羰基铁粉粒子(含氧化层)的平均直径为16nm。直径在4～24nm范围的粒子数占总粒子数的91％,而7-Fe_2O_3粉末既有雪茄状粒子,也有小球状粒子。分析表明,球状粒子的平均直径为113nm,雪茄状粒子的平均直径(按<长 宽>/2计算)为148nm。由于超细铁粉粒子很细,且有磁性,制备电镜试样时分散比较困难。本文比较了几种分散方法后,使用了一种较好的分散方法——超声喷管分散法。     

基于GIS技术的安徽省重大农业气象灾害测评系统总体设计

对《基于GIS技术的安徽省重大农业气象灾害测评系统》的总体设计方法作了概要介绍。该系统的建立主要是采用GIS技术，综合气候分析、遥感监测、地理环境影响评判等方法，提高对安徽省干旱、洪涝、低温冻害等重大农业气象灾害实时监测、趋势预测，以及对农业生产影响的分析评价结果的准确性。     

On solving constrained optimization problems with neural networks:a penalty method approach

Deals with the use of neural networks to solve linear and nonlinear programming problems. The dynamics of these networks are analyzed. In particular, the dynamics of the canonical nonlinear programming circuit are analyzed. The circuit is shown to be a gradient system that seeks to minimize an unconstrained energy function that can be viewed as a penalty method approximation of the original problem. Next, the implementations that correspond to the dynamical canonical nonlinear programming circuit are examined. It is shown that the energy function that the system seeks to minimize is different than that of the canonical circuit, due to the saturation limits of op-amps in the circuit. It is also noted that this difference can cause the circuit to converge to a different state than the dynamical canonical circuit. To remedy this problem, a new circuit implementation is proposed.     

垂直平行束状孔爆破模型试验与分析

垂直平行密集束状孔落矿有底柱崩落法是一种新的采矿方法。通过爆破模型试验，测试爆破应力，观察分析爆破效果，探求最佳布孔形式，选择最优爆破孔网参数。试验结果表明：用平行束状孔取代扇形落矿，改善了爆破效果，简化了采场结构，减少了采切工程量。     

工业产品的艺术造型与技术美学

本文从技术美学的角度，广义的介绍了工业产品艺术造型的基本方法，着重从美学原则和色彩设计两方面论述产品造型设计的手法，以及技术美学在产品造型设计中的基本应用。     

The application of transmission-line modelling to the simulation ofan induction motor drive

The simulation of a complete induction motor drive is presented. The entire network is modelled using the transmission-line modelling (TLM) technique. The network is split into three sections which are solved independently and are joined together by link transmission-line models. Advantages of this approach are the explicit nature of the algorithm which remains unaltered irrespective of the network topology, unconditional stability, and straightforward modelling of switching elements. Results are presented for a complete drive which illustrate the capabilities and flexibility of the simulation technique