傅立叶变换在虚拟仪器LabVIE中的应用

文中介绍了LabVIEW环境下用NI公司高级分析库里的信号处理工具包的Real FFT.vi傅立叶变换,采用此种方法对某型飞机起落架液压测试系统采样信号进行频谱分析,实验证明其效果良好.     

适用于稠油开采的游梁式抽油机设计分析

在稠油开采中,抽油杆在液体中运动时,所受到的摩擦阻尼力很大,有时高达几十千牛。上冲程时,该力有加大悬点载荷的作用;下冲程时,该力使抽油杆下行困难,甚至悬点载荷为零。为了开采稠油,必须根据其特点设计适应的游梁式抽油机。文章分析了稠油用抽油机的受力特点,提出了该类抽油机的设计要求。     

巷道最佳注浆加固时机的分析研究

对松散破碎以及软弱围岩巷道进行注浆加固巷道围岩时,注浆时机的选择对注浆效果具有很大的影响。有效地进行注浆加固的先决条件是浆液能够在围岩中均匀地流动渗透到一定范围,且注浆后能明显提高围岩强度和整体承载能力。在综合考虑围岩裂隙的发育程度、注浆加固体的强度、所需控制的围岩变形量及注浆工艺等因素的基础上,确定了最佳的注浆时机——滞后15d～25d。     

纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

Control of Titanium Alloy Thin Plate Welding Distortion by Trailing Peening

The technology of trailing peening is a kind of promisingly bran-new technology which can be used to control weldingstress and distortion of Ti alloy thin plate. Control of TC4 Ti alloy thn plate welding stress and distortion underthe condition of convent     

艺术建筑设计的探索

通过徐州一中艺术楼的设计实践，寻求优美而独特的艺术形象，并用纯几何形体的组合来达到功能与形式的完美统一。     

关于影响面条食用品质相关因素的探讨

从小麦生产概况、面条发展历史和工艺、国内外对面条食用品质的研究3个方面,分析了我国面条工业发展缓慢的原因,提出了小麦育种-面粉工业-制面工业,3个环节紧密配合,协调发展,才能形成良性循环的新思路。     

Phenotypic analysis of antigen-specific T lymphocytes

Identification and characterization of antigen-specific T lymphocytes during the course of an immune response is tedious and indirect. To address this problem, the peptide-major histocompatability complex (MHC) ligand for a given population of T cells was multimerized to make soluble peptide-MHC tetramers. Tetramers of human lymphocyte antigen A2 that were complexed with two different human immunodeficiency virus (HIV)-derived peptides or with a peptide derived from influenza A matrix protein bound to peptide-specific cytotoxic T cells in vitro and to T cells from the blood of HIV-infected individuals. In general, tetramer binding correlated well with cytotoxicity assays. This approach should be useful in the analysis of T cells specific for infectious agents, tumors, and autoantigens.     

Antibody- and cell-mediated immune responses of Actinobacillus pleuropneumoniae-infected and bacterin-vaccinated pigs

The number involved in and the rate of migration of donor leucocytes into the following recipient organs (spleen, thymus, bone marrow, lung and mesenteric lymph nodes) were measured in two rat models of orthotopic liver transplantation (OLT) using donor-specific MHC class I antibodies. The first OLT model is one that does not require immunosuppression in order to achieve tolerance and involved the transplantation of DA (MHC haplotype, RT1a) livers into PVG (RT1c) recipients. The second model was one that required a 7-day (10 mg/kg) treatment with cyclosporin A (CsA) to achieve tolerance and used DA donors into Lewis (RT1(1)) recipients. Recipient organs were biopsied on days 3, 20 and 87 following OLT and donor leucocyte migration was quantified by immunohistochemistry and computer densitometry of immunoblots of detergent-solublized tissues in order to resolve both membrane-bound and soluble donor MHC class I antigen. In a separate experiment, spleen biopsies were taken following OLT on days 3 and 15 from the naturally tolerizing OLT model (DA into PVG), treated with and without CsA for 7 days and compared with the (DA into Lewis) model. The initial rate of leucocyte migration between days 3 and 21 following OLT was found to be the most rapid into the spleen, followed by the bone marrow and mesenteric lymph nodes in the naturally tolerant (DA into PVG) model when compared with the (DA into Lewis) model. The number of donor leucocytes in the spleen and mesenteric lymph nodes in both models was, however, approximately the same by 87 days. No real difference in the rate of leucocyte migration was seen in the thymus or the lung for both transplant models over the time course assayed. CsA was found to lower the rate of donor leucocyte migration only over the period it was administered. The rate of donor leucocyte migration into the spleen was still much lower 15 days after OLT in the (DA into Lewis) model compared with the (DA into PVG) model treated with and without CsA. Thus the differences in the rate of donor leucocyte migration into the spleen, bone marrow and mesenteric lymph nodes immediately following OLT may offer an explanation as to why the (DA into PVG) combination is able to accept a transplanted liver without immunosuppressive therapy.     

耐热钢主蒸汽管的焊接

1前言我厂动力区三期锅炉项目为2台75 t/h和1台130 t/h锅炉,与之配套的主蒸汽管道大量使用不同规格的15CrMo耐热管材,其主要规格为D273mm×11mm、D219mm×10mm、D159mm×9mm、D76mm×6mm、D36mm×4mm,管内蒸汽工作温度为450℃,工作压力为3.82 MPa,根据DL5007—92《电力建设施工及验收技术规范(》火力发电厂焊接篇)的要求,50%探伤,焊后24 h进行X射线探伤,评定标准为SD143—85,Ⅱ级合格。为保证质量,对15CrMo钢的焊接工艺特点进行了分析,评定了焊接工艺。2焊接工艺特点2、1 15CrMo属耐热钢,一般在热处理状态下焊接,其热处理状态为900…