长沙走马楼三国吴简研究的回顾

介绍了吴简的基本内容,较为全面地回顾了吴简的研究现状,并通过分析中外专家研究长沙走马楼吴简的成果,探讨了吴简研究的本质。     

信息化条件下任职士官计算机课程教学改革初探

针对任职士官计算机水平与部队信息化建设要求不相适应的现实问题,深入调查分析了某部队任职士官计算机水平的现状与实际需求,明确了士官任职教育计算机教学的目标,进而有针对性地提出了任职士官计算机课程教学改革的几点新思路,确保课程教学真正服务于部队,服务于实战。     

Preparation and characterization of linear low‐density polyethylene/low‐density polyethylene/TiO2 membranes

Because of their special functions, the application of nanoscale powders has recently attracted both industrial and theoretical interest. In this study, nanoscale TiO₂, which exhibited a special UV absorption and consequent antibacterial function, was added to a low‐density polyethylene/linear low‐density polyethylene hybrid by melt compounding to yield functional composite membranes. TiO₂ exhibited an apparent induced nucleation effect on the crystallization of polyethylene, and the size of the crystallites decreased while the number increaed with the introduction of TiO₂; however, the crystallinity of polyethylene changed little. Also, TiO₂ exhibited an ideal dispersion in the membrane with an average size less than 100 nm, and this excellent dispersion provided the membranes extra UV absorption; moreover, the transparency of the membranes was maintained to satisfy common requirements. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 216–221, 2005     

聚丙烯工程化研究

采用纳米填充、交联和转晶的复合技术对聚丙烯进行了改性，优选了纳米碳酸钙为填料。当β成核剂用量为0．5％、助交联剂为3％时，复合材料的综合性能达到最好，接近普通工程塑料的各项力学性能。红外光谱分析和熔体质量流动速率的测定表明，复合材料体系产生了微交联；DSC分析发现，PP材料的聚集态结构中含有β球晶。     

人脸识别在远程登录中的应用

介绍了远程登录中使用人脸进行身份验证的方法,讨论了系统结构和关键技术,给出了实验结果．此方法采用奇异值分解和判别式KL投影提取特征,利用类内平均距离作为验证依据,适用于人脸样本数量不是很大的情况．实验证明,该系统具有较好的应用效果。     

多视无人机影像环形拼接算法

由于多视无人机影像拼接时误差的传播和累计经常导致拼接图扭曲偏斜或者拼接的失败.针对这个问题提出了构建拼接环并以多级拼接作为辅助的拼接策略.首先将待拼接图像分为多组,每组中以环形方式进行拼接,然后利用SIFT进行匹配,RANSAC实现误匹配的去除,而后计算透视变换关系,最后通过平差方程将误差削弱.通过实拍无人机影像进行的拼接实验表明该方式可以有效减少累计误差的影响,提高拼接精度.该方法的提出可以作为影像拼接消除累计误差的有效方式之一.     

Method to compute the reachability set of S3PR

This paper proposes a novel approach to computing the reachability set by using place invariants and strict minimal siphons for S³PR with specific resource places. First, the set of invariant markings is enumerated. Then a necessary and sufficient condition is developed to decide whether a marking is spurious by analyzing the relationship between the number of tokens in the corresponding places of any strict minimal siphon and their bounds. In addition, the spurious markings are calculated. Finally, the reachability set of the net is generated by removing all the spurious markings from the set of invariant markings. Experimental results show the efficiency of the proposed method.     

Influence of static pre-loading on the dynamic bending strength of concrete with particle element modeling

Experimental tests show that static pre-loading has a significant effect on the dynamic strength of concrete.Based on meso-scale particle element model,numerical simulations of dynamic bending tests with pre-loading are performed.Complete stress–strain relationships are then obtained.Significant increase in dynamic strength is found when the pre-loadings are imposed within the elastic limit of concrete.However,when the imposition of pre-loadings reaches the plastic or softening range,dynamic strengths may gradually decrease along with the increase in pre-loadings.The distribution of energy components and the failure modes are discussed to explain the mechanisms of the phenomena.     

德惠断陷下白垩统碎屑岩储层特征及控制因素分析

德惠断陷下白垩统登娄库组、营城组、沙河子组储层物性差,勘探风险大.利用岩心观察、铸体薄片鉴定、扫描电镜分析、黏土X线衍射分析等方法,分析储层基本特征、储层成岩作用和控制因素.结果表明:德惠断陷下白垩统碎屑岩储层成分成熟度和结构成熟度较低,储层孔隙类型主要有残余原生孔、次生孔和混合孔,储层物性和孔隙结构较差;压实作用是导致储层物性变差的主要原因,溶蚀作用改善储层物性;纵向上发育2个次生孔隙带,主要形成于中成岩期,次生孔隙带的形成与有机质生烃排酸和断裂有关.研究结果为德惠断陷下白垩统进一步油田勘探提供地质依据,对其他地区类似储层研究有一定借鉴意义.