液压消音器的内部流场信号传输特性

对液压管路中给定的压力阶跃信号进行数学分析,得出信号在管路中传输特性;为设计液压消音器提供了数学基础。     

Atmospheric CO2 retrieval with a look-up-table based method by combining near and thermal infrared spectra

In order to precisely retrieve the atmospheric CO2 , a retrieval method based on both near infrared （NIR） and thermal infrared （TIR） is established firstly. Then a look-up-table （LUT） based fast line-by-line radiative transfer model （RTM） was integrated into the retrieval procedure to accelerate radiative transfer calculations. The LUT stores gas absorption cross-sections as a function of temperature, pressure and wavenumber. It could greatly reduce calculating time in radiative transfer compared to direct line-by-line method. Then retrieval was simulated using NIR, TIR and both bands. The retrieved CO2 profiles suggest joint approach could reconstruct CO2 profile better than those using NIR or TIR alone. Joint retrieval using both bands simultaneously could provide better constrain to CO2 vertical distribution in the whole troposphere.     

双水相萃取的应用研究进展

双水相萃取是一种新型的用于提取、分离、纯化的技术,目前的研究证明双水相萃取已经应用于生物分子分离、污水处理、贵金属分离、生物合成、检测等方面,而且由于其本身的易于扩大,成本低、快速、高效等优势,应用前景会更加广阔。     

沉积参数对二氧化钛薄膜结构相变的影响

用磁控溅射的方法在硅衬底上制备了二氧化钛薄膜,并通过改变薄膜沉积过程中氧气含量、溅射时间、工作压强、衬底温度等溅射参数,制备了系列薄膜样品,得到了二氧化钛薄膜两种相结构的最佳生成条件.研究表明:较高的工作压强有利于金红石结构的生成;衬底加热、增加沉积时间有利于生成锐钛矿结构;氧气含量的变化对薄膜的相结构没有明显影响.     

平板太阳能空气集热器热性能的实验研究

设计了一种太阳能空气集热器,对其热性能进行了实验研究。通过实验,分析了冬季3个典型日的集热效率和空气流量、进出口温度、太阳辐射强度间的关系。结果表明,出口温度随太阳辐射强度的增加而增加,集热效率随着空气流量的增大而增大。同时给出了太阳能空气集热器的效率方程。     

Finite difference method for dynamic response analysis of anchorage system简

Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.     

煤化学链燃烧颗粒流动反应的数值模拟

针对化学链燃烧气固反应速率的影响因素复杂未知的问题,本文建立了碳粒与CaSO4载氧体颗粒在水蒸气气氛下的数理模型,并利用Fluent进行数值计算,从微观上分析了温度和压力的改变,对颗粒间化学链燃烧反应速率、CO2生成速率以及载氧体表面固相生成物沉积速率的影响。分析结果表明,提高反应器内的温度和压力,均加快了CaSO4载氧体颗粒表面CaS的沉积速率,且压力的提高在很大程度上促进了沉积速率的增加,而沉积覆盖在载氧体表面上的CaS导致了反应速率的下降。该研究有利于高纯度CO2气体的捕集,从而达到减排的目的,对化学链反应速率的控制具有重要意义。     

电动汽车锂电池SOC估算研究

为了精确估算电动汽车锂电池的荷电状态(state of charge,SOC),本文通过对主流SOC估算方法进行分析与比较,提出了一种基于卡尔曼滤波算法的电动汽车能量管理系统(energy management system,EMS)SOC估算方法,同时采用联合模型以保证估算过程中有较好的精度,并在实验室条件下进行实测数据及MATLAB仿真分析。仿真结果表明,卡尔曼滤波算法对锂电池SOC进行在线实时估计是有效的,能够较为准确地计算出SOC值,且估算结果与实测值基本一致,该方法可以用于电动汽车锂电池SOC的估算,具有很强的实际应用价值。     

SADE-ELM电容层析成像流型辨识算法

针对电容层析成像反问题流型识别较难的问题,提出了一种新的ECT流型辨识算法——差分演化优化极端学习机算法,进而提出了基于自适应差分演化优化极端学习机(Sa DEEML)的ECT辨识算法.在论述极端学习机算法的基础上,结合差分演化算法对极端学习机算法进行优化,自适应差分演化算法中的关键参数,通过训练得到各类流型的分类器的参数,构造分类器进行精准与快速分类.实验结果表明:该算法能有效克服极端学习机算法的缺点并提高了局部与全局收敛能力,通过与BP、SVM算法比较,该算法具有竞争力,并为电容层析成像流型辨识的研究提供了新算法.     

全电子式有源程控电阻器的设计

提出了一种具有量程程控转换和阻值预置功能的电阻器设计方法,其实现电路由量程转换电路、增益设置电路和控制电路三部分组成,内部无继电器,具有多量程、阻值连续可调、分辨力高、准确度高等优点,针对提高电阻器分辨力和量程转换速度,以及消除导通电阻误差和引线误差,提出了具体的电路实现方法,对系统的分辨力和准确度进行测试验证,并通过分析实测数据可知,当阻值在0~1 kΩ范围时,分辨力可达到0.1Ω,阻值超过1 kΩ时,分辨力可达到1Ω.