纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

高能 X 射线工业 CT 技术的研究进展

目的 研究分析了国内外高能X射线工业CT技术的进展情况，方法 通过有关文献资料，对目前国际上主要的高能X射线工业CT技术及设备进行评述。结果和结论 对美国、德国等发达国家的高能X射线工业CT设备、线阵探测器、面陈探测器及重建算法进行了分析。     

SiC颗粒增强铝基复合材料切削表面分形维数及其与抗磨损性能的关系

做为一种耐磨性能很好的材料 ,SiC颗粒增强铝基复合材料切削加工表面具有分形特征。实际研究表明SiC颗粒增强铝基复合材料切削加工表面分形维数与抗磨损性能有密切关系 ,本文还分析了表面分形维数越大其抗磨损性能越强的机理。     

调节阀流量特性控制分析

介绍了调节阀的流量基本知识，从控制理论的角度，分析了调节阀的理想流量特性、工作流量特性和系统稳定性，指出了在热工领域内应用调节阀时的一些注意事项。     

近期全国建材市场走势展望

结合当前我国建材市场的形势 ,就建材市场“涨价风潮”的起因 ,从经济增长的结果、市场运行的规律等方面进行了论述 ,提出了涨价风潮对近期全国建材市场的影响     

Mechanical alloying in the Al-Bi alloy system

Mechanical alloying (MA) was carried out to investigate the MA behaviour of the immiscible Al-10, 30 at % Bi alloys. After the MA processing, the Al and Bi were finely and homogeneously alloyed. The Bi crystallite size decreased to 25 nm and 30 nm in the Al-10 at % Bi and Al-30 at % Bi alloys, respectively. By increasing the MA time, the hardness increased up to a value of 80 H _v, which is larger than that obtained from the rule of mixtures. The lattice parameter of Bi decreased by about 0.27%, which shows the formation of a non-equilibrium hcp Bi super-saturated solid solution. The extended solubility of Al in Bi was 1.9% in the Al-30 at % Bi alloy. Due to the extended solubility, depression of the melting temperature of hcp Bi was confirmed in the mechanically alloyed Al-Bi alloys. The maximum depression in the temperature was about 10 K. The measured values corresponded well with those estimated from the extrapolation of the solidus line.     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

一种新型同位素示踪剂载体及应用

同位素沾污、低注井同位素示踪剂因沉降造成的上返速度慢或无法上返、大孔道地层同位素示踪剂失踪等是影响注水开发油田后期吸水剖面测井资料质量的主要问题。同位素示踪剂载体的物理参数，尤其是其密度，是产生上述问题的重要因素。通过对同位素示踪剂载体技术指标优选而生产的一种新型同位素示踪剂，可以解决低注井同位素上返速度慢的问题，并能有效识别大孔道地层，减少同位素沾污。这种同位素示踪剂载体已在河南油田吸水剖面测井中应用，并见到了很好的效果。     

三相四线统一电能质量调节器的控制策略

针对电网输入电压的不平衡、非正弦及负载的不平衡、非线性特性，提出了一种基于三相静止坐标系下的三相四线统一电能质量调节器（UPQC）的协调控制策略。该策略将UPQC的串联变流器控制为基波正弦电流源，而并联变流器控制为基波正弦电压源，从而实现了三相四线UPQC对电能质量的综合控制能力，既改善了电网侧的电能质量问题，实现了电网输入电流的正弦及单位输入功率因数，也改善了负载侧的电能质量问题，实现了负载电压的平衡、额定及正弦。10 kVA系统实验装置的实验结果表明了该控制策略的有效性。